Marshall Electronics 12Vdc 2.0A Universal Power Adapter

Marshall Electronics 12vdc 2.0a Universal Power Adapter

Product Code: eq55381
Availability: In Stock

$59.97 $71.96

Qty

20 reviews Write a review

Description
Reviews (20)

The Marshall Electronics 12VDC 2.0A Universal Power Adapteris compatible with and perfectly replaces the power supply that came with your Marshall CV-225/502/303/565/343/345/365/350 camera. It features a locking DC connector to prevent accidental kick outs. The AC adapter supports worldwide power standards and comes with US, UK, EU, and Australian AC power connectors.

For Select Marshall Cameras For CV-225/502/303/565/343/345/365/350 Spare/Replacement for Select Cameras Locking Coaxial DC Power Connector Supports Worldwide Power Standards

Parameters
Connectors	AC: USA, UK, EU, AUST Camera: 5.5 mm Coax connector with 2.1 mm inner diameter DC Polarity: Center pin positive
Power	Input: 100 to 240 VAC, 50/60 Hz Output: 12 VDC, 2 A
Dimensions	60.24" / 153 cm ±3.94" / 10 cm (length including AC and DC power cords)
Weight	7.05 oz / 200 g
Packaging Info
Package Weight	0.48 lb
Box Dimensions (LxWxH)	4.85 x 4.7 x 2.5"

Universal power supply for use virtually anywhere in the world with AC power

The locking connector helps prevent accidental kick outs

Related Questions and Answers

Q: 1. Whats the maximum weight this can hold?

A: This arm does not work well. We are using it with a tiny camera and it is difficult to get it into position. It does not lock into position well. To answer your question, we have very little weight and I worry it will fall out of position at some point. Fortunately we are able to not touch that camera now that it is set up.

Q: 2. Can you link together to make 6 foot length?

A: No, this is not designed for extension.

Q: 3. Could this reliability attach a small camcorder (Canon VIXIA HF R800) to a 32" workstation display (having a 1/3" top bezel)?

A: No, it is designed for a camera with a much smaller form factor and it will not reliably support the HF R800.

Q: 4. is there a mounting fixture so i could hang the monitor below a shelf?

A: All four side of the monitor have 1/4 screw holes for mounting. I would then think of using a articulating arm such as this Marshall Electronics Articulating Locking Arm (11 ). How you attach it to the shelf depends. I would first go with this 16x9 Inc. Cine Lock Quick Release Mounting Device. Not only will lock the monitor in place, you can easily break down for transport if necessary. If the Cine Lock is not right for you, you might like a clamp like this Manfrotto Nano Clamp with 3/8 -20 to 1/4 -20 Screw Adapter. Have fun. :-)

Q: 5. What is the size of that power connector? 5.5mm?

A: Yes - it's 5.5mm (the standard DC mini-power plug, with + voltage in the center)OD: 0.215 inchesID: 0.075 inchesDepth: 0.375 inchesI bought two - they work great!

Q: 6. In this a three pin plug suitable for use in the UK? Thank you.

A: Based on what information we have, his has the circuitry to work in Europe but you will need a plug adapter. You can use this adapter Kanex Travel Bud International Adapter Kit B&H # KAINTADPBLK.

Q: 7. Is it compatible with Sony NP-F style batteries?

A: Yes it is. The Marshall Electronics 7" 1024 x 600 Camera-Top Monitor with Sony Battery Mount is compatible with NP-F style batteries.

Q: 8. Would this work for a Black Magic mini converter?

A: It will not. This is for Marshall Products only.

Q: 9. how long is the cable? can be custom made?

A: This cable is 3.2 feet long. We do not have custom options available for this cable.

Q: 10. work with lorex cameras?

A: This power supply works with most analog cameras that require 12v dc power.

Dov	27/09/2024
[7.05 oz / 200 g] very good 5

anyonymous	26/09/2024
[0.48 lb] I used the supply to power 2 G4 style LED under counter lamps. They are 12-volt LEDs that I wired in parallel and each use 240mA so the 500mA rating of this PS was perfect. 5

Timothy	29/08/2024
[0.48 lb] I was looking for a simple mount to put on my 49 monitor so I can mount my own LED light for zoom calls. It is hard to find something like that without being forced to buy the LED light with it which are usually junk. This did the trick and I can in fact mount anything to it as long as it has either a cold shoe or 1/4 mount. The weight of it is pretty decent so that what ever I put on it does not fall off. The adjustment is pretty flexible. Great product. 5

anyonymous	14/08/2024
[7.05 oz / 200 g] purchased another camera for by system...added 12vdc power supply.... excellent service...will buy from B&H again 5

anyonymous	24/07/2024
[7.05 oz / 200 g] I use this for a Marshall video monitor and so glad to not have to replace batteries for the unit anymore! 5

Steve	21/07/2024
[7.05 oz / 200 g] Mount with a NP-F970 Battery and you can shoot for 5+ hours. Very stong and stable battery mount. 5

Steve	21/07/2024
[7.05 oz / 200 g] Mount with a NP-F970 Battery and you can shoot for 5+ hours. Very stong and stable battery mount. 5

April	13/07/2024
[0.48 lb] I've been using this thing for over a year now, with my Sony ZV-1. Makes it super easy to use like a normal webcam. The clip is solidly machined with really excellent build quality. 5

Patrick	28/06/2024
[7.05 oz / 200 g] Just what I needed to power my Marshall V-R44P Rack Mounted LCD Panels Four 4-in Full Color Active Matrix SDI 5