The 4K Ultra HD HDMI over IP Receiver features maximum input resolution of 4K 60 Hz 4:2:0, and maximum output resolution of 4K 30 Hz 4:4:4. HDCP 2.2 and 1.4 are also supported. Video, RS-232 2-way IR, and audio can be routed independently between any Sender and Receiver unit, allowing end users to control any of the sources and the displays within their network. With this greatly expanded array of advanced features and performance, the Gefen AV over IP products fully address the ever-growing needs of systems integrators.

• Extends HDMI, RS-232, analog audio, and IR, using a Gigabit Local Area Network
• Independent video, RS-232, IR, and audio routing
• Supports input resolutions up to 4K 60Hz 4:2:0
• Supports output resolutions up to 4K 30Hz 4:4:4
• Uncompressed LPCM digital audio up to 7.1 channels
• Up to 7.1 channels of HBR (High Bit Rate) digital audio including Dolby Atmos, Dolby TrueHD, DTS: X, and DTS-HD Master Audio
• Integrated scaler ensures maximum compatibility and best possible viewing experience with different contents and displays
• Enhanced API for added functionality with third-party control systems
• Built-in web interface, Telnet, and UDP
• Two-port Gigabit Ethernet switch
• Locking power supply connectors
• Low-profile receiver enclosure features an IR Extender port and can be hidden away behind the display

Related Questions and Answers

Q: 1. What can I use as a transmitter?

A: The transmitter is not sold alone. However, this kit will include both the transmitter and receiver for you. https://www.bhphotovideo.com/c/product/1314712-REG/startech_st12mhdlan_composite_and_s_video_to.html

Q: 2. Hi, will this work in the following sequence:source matrix av receiver cat6 balun transmitter cat6 receiver balun tvi guess i ask specifically with regard to the EDID management? will it still work when there is the cat6 section in the middle?

A: I am using it with a cat6/HDMI extender: this device a href= http://www.bhphotovideo.com/c/search?N=10944805&InitialSearch=yes&sts=pi target= _blank http://www.bhphotovideo.com/c/search?N=10944805&InitialSearch=yes&sts=pi/a

Q: 3. What is the frame rate?

A: The ToolBox 6x2 offers 4K frame rates at up to 30fps and HD at up to 60fps.

Q: 4. Is the audio an input or output? I wanting to marry processed audio with the mixed HDMI signal.

A: The only audio is what is embedded in the HDMI. So that we may be of better assistance in getting the product you need, please email us. provideo@bhphoto.com.

Q: 5. Can you set the EDID of this to 23.98 at any of it's resolutions?

A: We were not able to get a confirmation from Gefen. Still, we believe it can do what you wish. Here is a link to the manual. https://bit.ly/2rvUPM5

Q: 6. Max length of HDMI cable supported?

A: The manufacturer does not explicitly define this specification, but we would lean on the side of caution and keep the maximum length under 25 feet.

Q: 7. Does this camera supports genlock input for sync?

A: No, there are no input options for genlock.

Q: 8. Does this device only pair with the transmitter or can you link this device to decode any ip stream like an h264 from a camera.

A: If you are looking to send Video over a LAN/WAN network we recommend NDI encoders and decoders. The Ocean Matrix OMX-HDMI-2-IP has multiple setup solutions listed here. All of the setups are Transmitter to Receiver. Configuration - https://bit.ly/3BOLgeO

Q: 9. I see UDP protocol, is this VISCA over UDP?

A: No it is not. Here is the list of control protocols listed in Marshall's manual DHCP, DNS, HTTP, HTTPS, IPv4, UDP, NDI. VISCA is not mentioned once in the manual therefore it is safe to say the camera can not accept VISCA over UDP.

Q: 10. Does this product simply mirror one of the 6 sources to both displays? Or is it a true matrix, in that you can assign one source to the first display and a different source to the second display?

A: This is a true matrix switcher. It has 2 assignable and independent HDMI outputs.