The AXTON Blaze AT-25WE-S 800' PoE Illuminator Day/Night Sensorfrom AXTON Blaze AT-25WE-S 800' PoE Illuminator Day/Night Sensorsynchronizes with your camera or other system device. Pulsed mode allows syncing with a camera shutter for industrial, machine vision, and ANPR/LPR applications. The illuminator sheds light to a range of 800'. The illuminator is IP67 rated and vandal resistant, receive power via PoE, and includes a pan/tilt U bracket for simple installation. You can link multiple Blaze illuminators together to increase coverage.

7200-Lumen Output    Energy Efficient    Automatic Day/Night Switch    Powered via PoE    I/O Ports for Seamless Camera Sync    IP67 Rated    Includes Pan/Tilt U Bracket

Built-in PoE port

I/O ports for seamless camera sync

Pulsed mode allows syncing with camera shutter

Day/Night sensor

IP67-rated for outdoor use

Includes pan/tilt U bracket

Made in the USA

Related Questions and Answers

Q: 1. What is the CAT6 distance limit? What is the SDI limit?

A: CAT6 cable length limit for IP control is 100 meters (328 ft.), 3500 ft. for RS-422 control. SDI cable length limit depends on the cable type which is dictated by the signal SD, HD, 4K etc, etc you are sending. So that we my further assist you, please email us. provideo@bhphoto.com.

Q: 2. Is there a camera adapter?

A: Unfortunately there is no Photo Adapter for this Monocular. My sincere apologies.

Q: 3. I need an adapter or a step down ring to attach IGen to Celestron T-Mount Adapter. Could you recommend an adapter please?

A: Unfortunately I cannot. The Night Owl #NOIGM3X cannot be used to take photos with a camera. It has a video out connector that you can use to shoot videos with. The Night Owl #NOIGM3X-IC is the ONLY night vision device with Picture-Taking Capability.

Q: 4. Is there an online software that I may be able to connect via IP from outside the network to control the cameras?

A: While does offer software to control this camera, we are not aware of it being operable from outside of the network the cameras are installed within.

Q: 5. This unit is not weather proof correct?

A: THE UNIT IS NOT WATERPROOF.

Q: 6. if it has sd card can it take pictures

A: Not this version. There is a more expensive version with SD card socket that can take photos and vga video. You need to use an RCA cable to transfer image into a capturing device if you buy this version.

Q: 7. Does HDMI output 4K? i can see it have 3G-SDI only. but nothing mentioned on 4k output. want to use it with 4K switcher. Thank you

A: This camera will output 4K through its HDMI output. You can also use the two 3G-SDI outputs to create a Dual Link SDI for 4K as well, which tends to be a connection found on captured devices more so than switchers. If you have a Switcher with SDI inputs for 4K the Blackmagic Design HDMI to SDI 6G Mini Converter, B&H # BLCOMBHS24K6, is a good option to bring the signal in. https://bhpho.to/2EOui4q

Q: 8. Is there any sample footage available online?

A: We do not have any sample video on our site. However, a Google search for Sony BRC-X1000 video sample reveals links regarding the camera. We cannot vouch for these independent videos however.

Q: 9. Can I use light pollution or hydrogen alpha filters with it? If yes, what size?

A: Sorry you can't use any filters with the Night Owl Optics iGen 20/20.

Q: 10. For wiring in this camera with POE, will I need to run a SDI video line, and then a dedicated network line from a POE switch to each camera? Does the POE line carry data too, or will I need a separate network line for control data?

A: Hi Daniel G, The POE+ line will carry the control data as well. So make sure your ethernet switch is POE+, the cable is plugged into the LAN port of the camera and it is connected to the controller (by way of the switch). Ralph