The DJI Master Wheels 3-Axis Stabilizer for Smooth Footageis a wireless long-range gimbal controller featuring three wheel control modules, each providing individual control over one of the gimbal's axes. The Master Wheels controller is compatible with the DJI Ronin 2 and Ronin-S, as well as select third-party gimbals via an SBUS connection. It offers high-precision and low-latency wireless control over 1.8 miles of distance and wired control up to 98' (using an optional cable).

Performed movements can be saved and repeated later, allowing you to build up a library of gimbal movements. The Master Wheels 3-Axis is capable of operating in temperatures as low as -4°F, and it runs for up to 18 hours using the included batteries.

The wheel controllers use high-precision sensors and advanced control algorithms to achieve accurate and smooth camera movement. The high-resolution optical encoders are capable of detecting and communicating subtle movements, making the Master Wheels system suitable for professional film, TV, and video productions.

The wheels are made of stainless steel, providing a classic feel and reliable operation, and the center wheel module can be adjusted to the left or right into a position closer to one of the other modules as that might be helpful in some scenarios. The wheel modules can be used attached to the Master Wheels base or detached and connected via cables, providing more freedom in tight spaces.

Each wheel module has a three-stop toggle switch that controls gimbal direction and dials that control speed, smoothness, and damping. Additionally, various buttons (including three assignable ones), menus, and a display screen on the Master Wheels base allow you to monitor equipment status and adjust settings quickly.

Wireless Long-Range Gimbal Controller    3 Wheel Control Modules, 1 Per Axis    Compatible with DJI Ronin 2 and Ronin-S    Supports 3rd-Party Gimbals via SBUS    1.8-Mile Distance; 10 ms Latency    3-Stop Gimbal Direction Toggle Switches    Speed, Smoothness, and Damping Dials    Savable/Repeatable Moves    2.4 and 5.8 GHz Dual Frequency    Up to 18-Hour Operation in -4°F

• Wireless long-range gimbal controller for professional productions
• Three wheel control modules, one for each gimbal axis
• Compatible with the Ronin 2, Ronin-S, and select third-party gimbals (SBUS connection)
• 1.8-mile wireless transmission distance
• 98' wired transmission distance over optional cable
• 10 ms latency
• High-precision sensors and advanced control algorithms achieve accurate and smooth camera movement
• Savable, repeatable moves
• Three-stop toggle switches control gimbal direction; dials control speed, smoothness, and damping
• 2.4 and 5.8 GHz dual frequency
• Self-heating batteries feature up to 18 hours of battery life and allow operation in as low as -4°F
• Adjustable center wheel control module (positions closer to left or right module)
• Wheel modules can be used attached or detached and connected via cables
• Detachable control wheels
• Standard Mitchell mount
• 1/4"-20 and 3/8"-16 mounting threads
• Built-in display screen

Related Questions and Answers

Q: 1. what's the max weight/load this can take? thank you

A: In this case, and with most smarl phone gimbals, the width of the phone is the key more so than the load capacity. In most cases a load capacity is not even listed, as is the case with this gimbal. This gimbal works with smart phones between 2.2 and 3.2" inches in width.

Q: 2. Will the Ronin 2 come with batteries in the box? if so how many?

A: We expect the Ronin 2 to ship with at least 1 battery, that could however change when it is released. The battery it will use is B&H # DJI2P5TIFB.https://bhpho.to/2vKP8Lb

Q: 3. Will this work with the Ursa mini? The old Ronin didn't allow for the camera to balance properly due to its length.

A: Both RED and Canon C300 camera's can be mounted suggesting that a URSA Mini can be also. Additional accessories such as a cheese plate and a riser necessary to make this happen will be available soon from DJI.

Q: 4. Do the master wheels come with a travel case?

A: We are afraid not. A travel case is not included.

Q: 5. Would this work with an Arri Alexa EV? I see that it can withstand its payload but I'm not sure if its dimensions are compatible.

A: Based on both specs, it should have no issues. Because of the length of the camera, you may not be able to use incredibly long lenses, but it is unlikely to be an issue. Maximum Depth from the Center of Gravity on Camera Baseplate: 9.6 / 245 mm

Q: 6. Hi, what is included in the box with this 2nd hand kit? Is the following included as per a brand new system or are there pieces missing? Does it come in the original DJI master wheels case? Master Wheels (3-Axis) 1 Monitor Power Cable 1 USB-C Cable 1 Mitchell Mount Adapter 1 Intelligent Battery 2 Battery Charging Hub 1 Allen Wrench 2 Antenna 6 Video Link Power Cable 1 RF Power Cable (5m) 1 Communication Cable (2m) 3 Power Adapter 1 Power Cable 6 User Guide 1 DJI Wireless Receiver 1 DJI Wireless Receiver Antenna 1 DJI Wireless Receiver to D-Bus Cable 1

A: DJI Master Wheels in the factory sealed box: In the Box DJI Master Wheels 3-Axis Monitor Power Cable USB-C Cable Mitchell Mount Adapter 2 x TB50 Batteries Battery Charging Hub 2 x Allen Wrenches 4 x Antennas Video Link Power Cable RF Power Cable (16') 3 x Communication Cables (6.5') Power Adapter Power Cable Wireless Receiver Wireless Receiver Antenna Wireless Receiver to D-Bus Cable Limited 1-Year Warranty

Q: 7. Can this gimbal be controlled by the Walter Klassen Wheels via Futaba receiver?

A: According to DJI, yes, you can use third party controllers with the Ronin 2.

Q: 8. will this unit work with the red ranger monstro?

A: yes it will support the payload, you will most likely need some additional mounting accessories from cinemilled to set up the gimbal for the longer camera body

Q: 9. Is this a used version? Refurbished? Does it come with a case and the other things the package comes with? A box?

A: This is a service kit to replace the main components if damaged. You get the Ronin 2 Gimbal Head, the TB50 Battery Mount, and the Ronin 2 Power Hub.

Q: 10. Does this kit come with the Ronin 2 Professional Combo or the basic combo and the ready rig?

A: The kit comes with the Ronin 2 Professional Combo.