The Cool-Lux NC1384 Ni-Cad Battery PowerBelt (13.2V/7A) features a 13.2V NiCd battery and two 4-Pin XLR connectors. Heavy-duty 16-gauge wiring is utilized with slip-proof connectors to ensure a long, reliable operating life.

The 13.2V design of the NC1384 complies with equipment manufacturers specifications, eliminating 12V battery problems. The NC1384 is designed in a 13.2V configuration with a full discharge rating of 11V. Therefore, the NC1384 will deliver its full capacity before the camera reaches its cutoff point.

Dual power outputs are included with auto reset short-circuit protection. These outputs utilize 4-Pin XLR connectors.

Part of the Black Tie Edition, the NC1384 is designed to be worn comfortably for hours upon hours. The belt wears elegantly under a suit or tuxedo jacket without looking obtrusive. The belt can be fully adjusted to fit snuggly around the operator's waist with an adjustment range from 34 to 56".

A row of three, LED lights offer the operator a close approximation of the current battery condition.

Related Questions and Answers

Q: 1. Does this work with the Sigma 18-35 Art lens, considering it has 72 mm in diameter?

A: You chose wisely. This gear is listed by the company to fit the Sigma 18-35mm.

Q: 2. Does anyone know the right size for a Sigma 10-20mm f/3.5 lens?

A: Cool-Lux LuxGear Follow Focus Gear Ring (76 to 77.9mm)

Q: 3. Will this ring fit the focus ring on a canon 100-400 L IS ii? I realize the outer focus ring diameter is 94mm… but after measuring with the Cool Lux Gear sizing key (paper print out), the inner diameter of the focus ring falls in the 90 to 91.9mm zone. Would it possibiy work?

A: We do not recommend using this ring as it may be too small for the lens.

Q: 4. Is the battery release push rod on the Cool-Lux V-mount plate 951355 metal or plastic?

A: The battery release push rod is made of plastic on this unit.

Q: 5. Would these also work with the other Loxia lenses given their identical diameter?

A: They may work with other Loxia lenses as well. The Lux Gear Kit for ZEISS Loxia Lenses from Cool-Lux includes three 62-63.9mm 0.8 MOD lens gears for use with the following ZEISS Loxia Lenses: 21mm f/2.8, 35mm f/2.0, and 50mm f/2.0. The 62-63.9mm gear is also compatible with select other ZEISS and Nikon lenses—please see the full compatibility list below. Compatibility: Lenses with focus barrel diameter of 62 to 63.9mm, such as Zeiss Distagon T* 18mm f/3.5 ZF & ZF.2 Zeiss Distagon T* 21mm f/2.8 ZF & ZF.2 Zeiss Distagon T* 25mm f/2.8 ZF & ZF.2 Zeiss Distagon T* 28mm f/2 ZF & ZF.2 Zeiss Distagon T* 35mm f/2 ZF & ZF.2 Zeiss Loxia 21mm f/2.8 Zeiss Loxia 35mm f/2 Zeiss Loxia 50mm f/2 Nikon 20mm f/2.8 AIS Nikon 24mm f/2.8 AIS Nikon 28mm f/2.8 AIS Nikon 50mm f/1.4 AIS Nikon 55mm f/2.8 Micro AIS

Q: 6. Will this work with the neewer follow focus?

A: This features standard 0.8-mod/32-pitch geared teeth. If it will work depends on the exact follow focus, but it more than likely will work.

Q: 7. Will this work with the Sigma 18-35 Art lens?

A: Hello Kerry,It works perfectly on the Sigma 18-35 Art. I just received mine a few days ago. It's one of the best solution out there to transform your lens with appropriate follow focus ring.Cheers

Q: 8. Don’t see the Sigma 28-70 E mount listed. Which one would fit it?

A: Unfortunately , there are many untested lens models. However, Cool Lux offers a printable Luxgear ruler to measure lenses that are not on the tested list. RULER: https://bit.ly/3UvXRzb

Q: 9. Does this work for the Sigma 18-35 art lens?

A: It will not. The Sigma Art 18-35mm lens has a outer diameter of 78mm. Instead you would want the Cool-Lux LuxGear Follow Focus Gear Ring (78 to 79.9mm), B&H # COLG7879. This should work with that lens. https://bhpho.to/2r2qXr6

Q: 10. Hello and thanks in advance for the help to however is going replay; I do have 2 Sony lens ( SONY FE 24-70/2.8 GM LENS and Sony FE 16-35mm f/2.8 GM (G Master) i like to use the Tilta M motor but I don't know if this ring will be spinning on the lens or it will be mooving or is the best solution comparing to the soft follow focus ring? Once more thanks Fabry

A: Tilta makes their own rings which are measured for use with these specific lenses. For both the Sony FE 24-70mm f/2.8 GM II Lens and Sony FE 16-35mm f/2.8 GM Lens, Tilta recommends the Tilta Seamless Focus Gear Ring (81 to 83mm). This is what we would recommend for use with your set up. https://bhpho.to/3EYPODd