Hawk-Woods Reel Power H-Series 26V Li-Ion Camera Battery

Hawk-woods Reel Power H-series 26v Li-ion Camera Battery

Product Code: eq55654
Availability: In Stock

$1,804.20 $2,417.63

Qty

6 reviews Write a review

Description
Reviews (6)

Run your high-voltage camera from this 200Wh Reel Power H-Series Li-Ion 26V Battery from Hawk-Woods. Equipped with a standard male V-mount connector, this battery is compatible with the Reel Power range of adapters and chargers. Low-resistance cell technology allows for high discharge and an improved life cycle.

For High-Voltage Cameras 200Wh Li-Ion Battery 26V Power V-Mount Interface Works with Reel Power Range Low-Resistance Cell Technology High Discharge Rate Built-In Fuel Gauge Over-Discharge/Voltage Protection Short Circuit & Thermal Protection

Parameters
Mount / Series Type	V-Mount
Chemistry	Lithium-Ion
Battery Capacity	200 Wh
Output Voltage	26 VDC
Accessory I/O	No
Dimensions (W x H x D)	6.06 x 3.11 x 3.31" / 15.4 x 7.9 x 8.4 cm
Weight	3.31 lb / 1.5 kg

26V battery pack

High discharge rate

Built-in fuel gauge

Over-discharge and over-voltage protection

Short circuit protection and thermal protection

Related Questions and Answers

Q: 1. Does this come with a charger?

A: Unfortunately a charger isn't included for the Mini V-Lok battery, but we do have these compatible options from Hawk-Woods listed currently: https://bhpho.to/2WwrcIm

Q: 2. How reliable is the company or at least the battery, I can't find too much about them on google and I'm a little afraid that this battery will be as good as 30usd knock off

A: Hawk-Woods is a very reputable battery brand.

Q: 3. Can these charge via the D-Tap ports? Or are they purely outputs?

A: The D-Tap ports are only outputs.

Q: 4. Does this work with the FX6 charger?

A: The Hawk-Woods BP-60U 60Wh 14.4V Lithium-Ion Battery is a BP-U series battery and is compatible with the Sony FX6 and its charger.

Q: 5. So is this 7.2v or 8.4v output as per the picture?

A: The Hawk-Woods D-Tap Male to Sony A7S Dummy Battery MFR # LR-16 provides regulated 7.2v.

Q: 6. Is it safe to power a Blackmagic 7" video assist monitor via the D-tap while also powering the Sony FX6?

A: Blackmagic Video Assist monitors can be safely powered by the Hawk-Woods BP-75UX 75Wh 14.4V Lithium-Ion Battery with 2 x D-Tap Ports when using a regulated cable.

Q: 7. Hi hoping you can help. I was wondering which model of charger charger I need for these batteries? Or is it possible to get an adapter plate fore the Watson Duo Charger which I already own? Thank you.

A: A Watson charger such as the Watson Duo LCD Charger for BP-U (SKU: WADCBPU) should work well for this battery, however, unfortunately there is currently no option for a replacement battery plate for an existing Watson Duo Charger. https://www.bhphotovideo.com/c/product/1143844-REG/watson_d_4231_duo_lcd_charger_for.html/

Q: 8. What is the maximum load on these batteries?

A: Here are the full Specifications from Hawk-Woods Model:BP-98UX Type:BPU Weight:440g Size:9.2 x 3.9 x 7 cm Nominal Voltage:14.4v Wattage:98Wh Capacity:6.8Ah Current:5A Number of D-Taps:2

Q: 9. Is this made of metal or plastic?

A: The Hawk-Woods SD-2 Sound Devices MDV Battery Adapter is made mostly out of a sturdy hard plastic with a few metal pieces such as the contacts and screws.

Q: 10. Sony a7s and a6500 use the same battery, will this work with a6500?

A: yes this will work for the A6500

Mako	25/09/2024
[Lithium-Ion] Using this with the Atomos Shinobi 7 and 3 different Gold mount batteries. Build quality is great and the batteries latch in nicely. Just plug in the cable before sliding the receiver plate onto the back of the monitor. The 3 batteries I am using with this - Indi Pro Tools Micro-Series 98W, Core SWX Hypercore NEO Slim 98Wh, and an official Anton Bauer Digital Series 90 Gold Mount Battery 87Wh. 5

Warren	09/08/2024
[26 VDC] Even though it seems to be of a design that may fail, I have used it non-stop for two years of Production Sound for double system film sound recording and it has worked perfectly. I actually bought two of them in case one failed, but so far I have only used one. It is much better than the one made by Sound Devices, because it has a lower profile when fitted with an XL-B3 battery pack. A professional will pay attention to what they are doing when inserting and removing this, and will never have problems! 5

Mark	03/08/2024
[Lithium-Ion] I use this with a MixPre-3 and a hirose-to-d-tap cable. Works as expected. Its awesome to be able to power the MixPre off camera battery. Would buy again. Only suggestion I have is that if you do use this to power your MixPre, and if you feed a signal back into your camera (i.e. not just record to the MixPre, but also send a scratch track signal from the MixPre to the camera), then you will want to get a ground loop isolator to put in your signal chain. Otherwise the in-camera scratch track will have interference noise. (The internal MixPre recording remains pristine.) 5

Frederic	14/06/2024
[26 VDC] This adapter could be sold by dozens if it was better marketed. It is a fantastic idea for anyone with on set monitors (focus pullers, camera ops, video village) . Worth EVERY penny. Hot swap is the bomb. 5