Pag Usb Connector For Gold Mount Paglink Powerhub

Product Code: eq55695
Availability: In Stock

$150.00 $232.50

Qty

24 reviews Write a review

Description
Reviews (24)

Power smartphones or other USB devices with your PowerHub by fitting the PAG USB Connector for Gold Mount PAGlink PowerHub. Once fitted in one of the PowerHub's slots, 5V at 1A will be delivered via the USB connector. If your rig requirements changed, simply swap this connector using the quick-fit mechanism for easy customization in the field.

Power USB Devices via PowerHub 5V, 1A Output Quick-Fitting Design

Parameters
Connector	USB Type-A
Power Output	5 VDC, 1 A
Packaging Info
Package Weight	0.04 lb
Box Dimensions (LxWxH)	1.2 x 1 x 0.6"

Related Questions and Answers

Q: 1. Will this work with an Fx6?

A: The Hawk-Woods Sony FX9 Battery Plate with D-Tap & USB Out (Gold Mount) combined with the Sony FX6, does have the same power requirements with the FX9. This has only been tested with the FX9, so we can only speak for how it was made to operate.

Q: 2. Is it possible to provide power to the module via the Anton Bauer P-Tap Charger that's plugged into the wall?

A: Yes, you could use a Gold mount power supply with the edelkrone Power Module (Gold Mount). However, using batteries would be more cost effective. Gold Mount wall power supply idea: Anton/Bauer Tandem-70 On-Camera AC Power/Charger BH #ANT70

Q: 3. Will this unit charge other brand batteries, like the Anton Bauer dionic hc? Which batteries does this unit work with?

A: While this unit should charge most other 3rd Party Gold Mount Batteries, Anton Bauer Gold Mount batteries tend to only work on Anton Bauer Chargers. We would not recommend this charger for an Anton Bauer Gold Mount Battery.

Q: 4. Can I use an third party charger? I already own a gold mount charger.

A: PAG recommends only using PAGlink or Anton Bauer chargers for their PAG Mini PAGlink MPL99G Battery (99Wh). "It can be charged using PAGlink or Anton Bauer chargers, for maximum versatility and economic integration." https://paguk.com/sites/default/files/pdf/PAG-7241_Data_Sheet.pdf

Q: 5. Can this be used with a C100 mark 1, if I get a P-tap to Canon C100 power converter?

A: Yes, you can use a power tap / d-tap to DC barrel adapter to power the C100 from a brick battery. IndiPRO Tools D-Tap to DC Barrel Cable for Canon C100 (24 ) is an example of such an adapter.

Q: 6. Will this work with the PAGLink MPL99G Batteries? They are not listed in the overview section

A: Yes, the PAG PAGlink Micro Charger with Wall, USB, & Car Adapters (Gold Mount) would support charging of the PAGLink MPL99G.

Q: 7. Can this charger charge batteries while it is powering a camera through the xld output or can it only do one of those two functions at a time? Thx

A: According to PAGlink, Operation: The camera power supply function is operated by pressing and holding the Camera PSU button on the chargers front panel for 1 second. Charging is suspended whilst the power supply is in use.

Q: 8. Do these batteries have the FAA clearance sticker on them for checked baggage?

A: I just looked, YES it does.

Q: 9. Could I power the module with this? https://www.bhphotovideo.com/c/product/1590487-REG/anton_bauer_8475_0142_p_tap_charger.html

A: If you consider using the edelkrone power module you would be able to power up your each edelkrone setup with a single battery (Gold Mount or V- Mount). For instance, if you would like to use V-Mount battery, you need to buy the Power Module V-Mount. Both of these Power Module's have 4 DC output socket, so, in terms of operation, there is not any difference in between them as well. A Gold Mount battery cannot be attached to the V-Mount Power Adapter and vice versa. On the other hand, V-Mount and Gold Mount batteries have D-Tap output on their bodies. Power Module's D-Tap port allows the user to power up their different devices (for instance, camera) by using a D-Tap cable from the Power Module.

Q: 10. where is the USB outlet located?

A: The USB-C port of the Anton/Bauer Titon Micro Gold Mount Battery Bracket with P-Tap and USB Output is located to the lower left side of the adapter based on the image shown on our site.

Brian Stansfield	24/09/2024
[1.2 x 1 x 0.6"] Where to start? This battery is both durable in it's construction as well as usability in that it can be stacked to add amperage to a battery powered source that requires more than a typical 94wh load, this is genius. The fact that it trickles discharge from the exterior batteries inward means you can hot swap peel away the end battery off your camera/light/whatever-you're-powering while leaving a charged battery on board and add a fully charged pag to the back. This means never having to power down as long as you have 3-4 of these babies charged up. Speaking of charging, they stack and trickle charge as well! 4 Pags per AB charging plate. This saves you space, money and time as well as weight with less chargers needed in your flight case. The exterior power gauge is helpful showing you a rough percentage of remaining battery in numeric form rather than some of the other cyptic icon systems (speaking to everyone, looking at Anton Bauer). I can't speak to the life time of the battery, but it's been plugging away giving ample charge and discharge cycles for the better part of a year with no noticeable memory loss. Do yourself a favor and stop buying cheap batteries and get some PAGs. It'll be hard to go back to non-stackable battery systems after you have a chance to work with these PAGs... 5

Alan	22/09/2024
[5 VDC, 1 A] Best battery I have used so far. Ultra handy for hot swapping sincebatteries mount in series. Also provides extra outlets when used with accessory plate and outlet connectors are changeable to accommodate various standards. 5

Kevin	14/09/2024
[1.2 x 1 x 0.6"] Awesome, awesome batteries. I bought these 2 years ago anticipating run & gun scenarios where I would need to throw on more power on the fly without powering down, and sure enough those instances came up. The linking mechanism is a phenomenal design, allowing for quick power as stated above, but also for set-and-forget charging, allowing you to stack up to 8 in a single column. When my cells eventually wear out, you can bet the barn I'm going with PAG again. 5

Herb	12/09/2024
[5 VDC, 1 A] Simple, sleek and easy to use. 5

Ledion	22/08/2024
[1.2 x 1 x 0.6"] This works really well and it was easy to replace. 5

Reid	06/07/2024
[5 VDC, 1 A] I bought this to have the option to use 12 amps + hot swapping + an additional d-tap with my Amira. I sandwich this battery in-between the camera and a second PAG battery. It works great and is very compact and lite weight. 5

David	06/07/2024
[0.04 lb] Well built connector 5

David	06/07/2024
[0.04 lb] Well built connector 5

Jeremiah	02/07/2024
[USB Type-A] I currently own five of the PAG PL150 Series 150Wh and six of the PAG HC-PL94T. Im so glad I invested the extra money for these batteries. Theyre just so incredibly versatile. Love the fact they stack so I dont need to wake up in the middle of the night to swap out batteries as they charge. Also, when they stack they become much more capable batteries if you need more Wh or A for lights, etc. Expensive, yes, but I believe worth it in the long run. 5

Russell	12/06/2024
[5 VDC, 1 A] I you use a gimbal or use a lot of hands held work for camera or even need a light weight battery for your drone camera if your using the RED or Arri this is the battery you will want in your kit. I just recently was working on a documentary and had a lot of hand held or quick snap off the tripod and chase after someone with my RED camera and this lighter and smaller battery really helped out a lot. If you have the PAG 94's this is about 30% lighter and smaller in volume. 5