The APC Smart-UPS RT SURTD6000RMXLP3U Battery Backupfrom APC Smart-UPS RT SURTD6000RMXLP3U Battery Backupis a high-performance, uninterruptable power supply that provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges. It filters small utility line fluctuations and isolates electronic

equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged. It can provide up to 4.3 minutes of use when running a full load of 4200W and up to 14 minutes of use when running a half load.

This Smart-UPS RT features an output of 4200W / 6000 VA, a nominal input of 208V @ 50/60 Hz ±5 Hz, an input voltage range of 156-236V (adjustable from 85-136V), four NEMA L6-30R, four NEMA 5-20R, and one NEMA L14-30R battery backup outlets, a NEMA L14-30P input connection, a surge energy rating of 480 joules, double conversion online topology, and a sine waveform output. The preinstalled AP9631 network management card provides remote monitoring and control of the UPS, while included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems. Also included are a front bezel, stabilizer brackets and screws, a top cover and screws, an SURTRK2 rail kit, and an RS-232 serial cable. Support is provided by a limited 2-year repair or replace warranty.

Output: 4200W / 6000 VA    Input: 208V @ 50-60 Hz ±5 Hz    NEMA L6-30R, L14-30R, and 5-20R    1 x NEMA L14-30P Input Connection    480 Joule Surge Energy Rating    Recharge Time: up to 2.5 Hours    Double Conversion Online Topology    Sine Waveform    Cold-Start Capable    AP9631 Network Management Card

Easy recovery from overloads with no need to replace a fuse

Helps ensure the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Helps ensure clean, uninterrupted power to protected equipment when generator power is used

Minimizes installation costs by enabling the use of smaller generators and cabling

Protects connected loads from surges, spikes, lightning, and other power disturbances

Provides temporary battery power when the utility power is out

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery

Related Questions and Answers

Q: 1. Hi, is this compatible with QNAP nas? I saw in a youtube video the SMT750i but does that mean that this should work too?

A: The APC Smart-UPS Battery Backup & Surge Pr tector with SmartConnect BH #APS3000RM2UC can be used with a NAS.

Q: 2. What exactly does this unit provide? Power up computers? Phone?

A: Thank you for your interest in our products. This unit would provide a battery backup during a power outage. For example if you had a small power outage your equipment would stay on till the battery depletes. Usually computers are connected to it but you could connect a phone to it. You would just want to stay under 900 watts so the UPS doesn't become overloaded.

Q: 3. What is the battery connector on the back of the UPS for?

A: The port on the back marked battery is actually a disconnect, not a connector. It is recommended that you disconnect the battery during transportation, and this port provide a convenient way to do so.

Q: 4. I just bought this and realized it came with a 30amp AC Plug. Can I safely adapt this to 15amp plug to use in a regular outlet? Will it just result in a slower battery charge?

A: Thank you for your interest in our products. If you do change the input power cord to 15 amp it will derate the UPS to a 1500VA UPS. It wouldn't slow charge but you would not be able to connect the same amount equipment to the UPS. We do recommend a licensed electrician change out the cord as well. For more information on this please check out the following knowledge base. https://www.apc.com/us/en/faqs/FA156517/

Q: 5. Can i start this unit without power it? (just with the rechanged battery)

A: The unit must be powered on in order to charge the battery.

Q: 6. Is this unit compatible with the APC Smart Card "AP9641" - 2020 version of network card?

A: No it is not compatible.

Q: 7. I want to hook up to survillence system to keep powered up when losing utility power. I assume this will do the trick?

A: Absolutely will be fine.Most surveillance systems draw very little power, and the near perfect sine-wave output is great for video equipment that would otherwise be susceptible to electronic noise (ie. spurious lines in the video, etc). However, this unit can only keep your surveillance system running for a limited amount of time, and you can determine the amount of time by visiting the APC website and using their UPS sizing tool to help determine about how much time your system will stay powered.And a sidenote... if you are using a PC-based system to record the surveillance data, then the amount of time will be substantially reduced due to the extra power needs of PC itself, so make sure that you include the wattage of the power supply in the PC when determining your power needs.If this 1440VA (about 1050watts) will only keep your PC-based surveillance system powered for about 10-mins, then you might want to consider a larger UPS unit, or one that can accept additional battery packs to extend the power timespan.

Q: 8. Will this work on 15 amp?

A: Thank you for your inquiry. This would have a NEMA 5-20P plug on it. If you change the plug to a 15 amp plug then you would derating the UPS. You wouldn't get the full capacity out of the UPS and it would be rated for around 1,500VA. I apologize for any inconvenience this causes.

Q: 9. does this product come with batteries?

A: Yep

Q: 10. how many hours of battery does this provide? when no electricity?

A: It will really depend on what you have plugged in. Please see the overview for a basic look at usage. You will need to calculate how much wattage all items being plugged in will pull for an hour and then calculate it from there.