The Steinberg UR-RT2 is an audio interface that communicates with your computer over USB 2.0. It provides four inputs, two outputs, and conversion up to 192 kHz / 24-bit. Preamps have been designed by Yamaha, providing a transparent and detailed capture of sound. Furthermore, switchable transformers are on hand courtesy of Rupert Neve Designs, a company famous for, amongst other things, their switchable harmonic distortion, which rounds out signals and lends warmth to otherwise cold audio. These transformers are beneficial for vocals, acoustic guitars, or any instrument with significant dynamic range.

On the front panel, you'll find combination XLR-1/4" jacks that are switchable between microphone and Hi-Z configurations. Next to these inputs are the gain pots and transformer switches, between which you'll find RND's logo. A single headphone output jack, headphone level knob, and output level knob are all prominently displayed. Turn your attention to the rear of the device and you'll note the MIDI I/O, two line inputs, two main outputs, a USB port, and a +48V phantom power switch for powering condenser microphones.

An SSP2 DSP chip is on hand to help you achieve zero-latency FX monitoring across many DAWs and platforms, making this device suitable for use with laptops, tablets, and desktop computers. At 7.8 x 1.9 x 8.2", the unit is compact enough to take on the road.

High-Speed USB 2.0 Computer Interface    Yamaha Combination XLR-1/4" Preamps    Transformers by Rupert Neve Designs    24-Bit / 192 kHz Audio Processing    2 Main Outputs & 2 Line Inputs    1 x Headphone Output with Level Knob    48V Phantom Power & Hi-Z Switches    MIDI I/O    Latency-Free Monitoring    Cross-Platform Compatibility

The converters used in the UR-RT2 provide a maximum sampling rate of 192 kHz and 24-bit resolution.

The UR-RT2 interfaces are equipped with Yamaha's D-PRE preamps. These deliver transparent and detailed sound.

The Rupert Neve Designs transformer featured in the UR-RT interfaces adds a natural distortion to the signal to achieve a sound with more depth and perspective. Input channels 1-2 on the UR-RT2 each feature a transformer that Rupert Neve Designs has specifically developed for audio interfaces.

Thanks to the built-in SSP2 DSP and the included dspMixFx software, the UR-RT2 provides zero-latency monitoring with FX on Windows, macOS and iOS, and with every DAW.

The UR-RT2 audio interfaces provide cross-platform compatibility for Windows, macOS and iOS, with the included Cubase AI and Cubasis LE music software.

The loopback function merges incoming signals with the playback signal and offers an easy way of streaming performances live to the Internet.

Related Questions and Answers

Q: 1. The description is ambiguous. Is this an analog to digital converter? Are the input connectors RCA or XLR?

A: Yes it is. It is also an audio interface. This is a list of the inputs and outputs:2 x combination XLR-1/4 inputs2 x 1/4 TRS line inputs, phone type1 x 5-pin DIN MIDI input1 x 5-pin DIN MIDI output2 x 1/4 TRS main outputs, phone type1 x 1/4 headphone output, phone type1 x 5-pin DIN MIDI output

Q: 2. What would be the best way to connect a Focusrite Scarlett Solo to the Neve?

A: The Scarlett Solo features unbalanced outputs. Connection from the outputs to the Neve RNHP headphone amp would be via RCA cable. From the headphone jack of the Solo would be an alternative. In this case the 3.5mm jack would be the most closely matched connection.

Q: 3. How is the volume level on the monitor out controlled?

A: The output level is worthy of most headphones and active monitors that one would want to connect.

Q: 4. Is it still possible to ignore the dedicated DI and instead use the 2 mic/line pres for 2 separate electric guitars? Can the 2 inputs be used as instrument inputs like the Motu M2?

A: Just one instrument input: "This unit may look tiny, but it packs two pristine mic pres, a Hi-Z input for instruments, two 1/4" monitor outputs, and a headphone out that can power a variety of cans with power and punch." Analog I/O: 2 x Combo XLR-1/4" TRS Balanced Mic/Line Input 1 x 1/4" TS Unbalanced Hi-Z Input 1 x 1/4" TRS Unbalanced Headphone Output 2 x 1/4" TRS Balanced Monitor Output

Q: 5. Will this mic come with the USB cable to connect to your computer?

A: Yes, A USB Type-C to Type-A cable is included.

Q: 6. Does the green signal/clip indicator LED glow from dim to bright as the signal level increases?

A: The LED will light up green when an input signal is recognized, and red if the signallevel is too high which may cause distortion or “clipping”. THe green level does not change from dim to bright.

Q: 7. Are there separate buses for the headphone outs, or are they shared with the line outs?

A: The Steinberg UR44C 6x4 USB Gen 3.1 Audio Interface's headphone outputs are independent of its line outputs.

Q: 8. Is this unit sufficient to use with the Shure SM7B?

A: Yes, you can use the EVO 4 with a Shure SM7B. There is sufficient gain for the mic with the built-in preamp. However, if you find that you require more volume from the mic for your application, you can add a Cloudlifter, FetHead or similar device between the mic and EVO 4 for additional gain.

Q: 9. Does the 24-bit 192kHz also apply to music playback or is it just for recording?

A: This specification relates to the converters that pass the analog signal from the microphone during recording only.

Q: 10. Is it Mac compatible?

A: Steinberg's website states the UR-RT2 audio interfaces provide cross-platform compatibility for Windows, macOS, and iOS with the included Cubase AI and Cubasis LE music software but doesn't specific what macOS versions are supported apart from its minimum specs. https://www.steinberg.net/en/products/audio_interfaces/ur_rt_series/resources.html