Protect your AIR EVF rod from sliding out with this Wooden Camera 19mm End Cap Air EVF Mountfrom Wooden Camera. This end cap is the same as the original cap and mounts onto the end of the 19mm rod that is part of the AIR EVF Mount. The black cap screws onto the end of the rod and prevents the rod from sliding off while protecting the inner rod from dust and debris. It features a notched design to make it easy to install and remove.

For AIR EVF Mount Rod    Fits on End of 19mm Rod    Protect Rod from Sliding, Dust & Debris    Notched Design, Black Color

Related Questions and Answers

Q: 1. Is there dampening control of Rotating Rosette, or is it fixed? What is max length (center of rosette to center of 15mm rod)?

A: No, the Zacuto Axis Micro EVF Mount is not dampening, but you can add BH #ZAZFRJ which will add dampening to the Zacuto Axis Micro EVF Mount. The max length or the Zacuto Axis Micro EVF Mount is 3.88 inches. Zacuto also offers B&H # ZAZMAEM which has dampening.

Q: 2. Does one have to loosen and then tighten the rosette knobs each time, to rotate the rosettes? Or is the rotation on both rosettes of the Zacuto Flush Rosette EVF Mount as fluid as it is in the Zacuto Axis Mini EVF Mount?

A: Yes, rotating the thumbscrew is necessary in order to adjust accessories mounted on the Zacuto Flush Rosette EVF Mount. The Zacuto Axis Mini EVF Mount has more points of adjustment.

Q: 3. It works with Tilta TT-03-GJ Rig Follow Focus Kit ? Thanks.

A: This Wooden Camera Lens Support will work with the Tilta. However, the lens will determine the length of the rods and exactly how well everything works together.

Q: 4. Will the 24 cable work with the 7 Red Touchscreen LCD? 36 cables DO NOT work with the 7 LCD (they do work with the 4.7 ).

A: Hi Andrew. Yes, the 24 cable is compatible with the 7 DSMC2 monitor.

Q: 5. What shoulder plate should I use for this?

A: We recommend using the Wooden Camera Shoulder Rig v3. You will seamlessly be able to transition from the two dovetails.

Q: 6. What is that rod attachment shown in the picture on the front of the camera/cheese plate?

A: That is two different products from Wooden Camera. First is the Top Plate for C100, C300, C500, while the 2nd product is the the 15mm Tube Clamp for UVF Mount and UVF Mount v2.

Q: 7. Will this mount onto a cold shoe adapter?

A: This mount is designed to work specifically with a Wooden Camera Universal Offset Bracket. It has a set screw built in to the bottom, so I would not suggest this model. A good shock mount for a cold shoe is the Auray DUSM-1 Universal Shock Mount for Camera Shoes and Boompoles, B&H # AUDUSM1.

Q: 8. are the locating pins removable?

A: Yes, the Wooden Camera 19 mm Bolt-On Rod with 3/8”-16 Mount's locating pins can be removed by unscrewing the screw, not pictured, and removing the pins from the inside.

Q: 9. What is the distance between the center of the rosettes in the fully extended position?

A: Zacuto Flush Rosette EVF Mount is 4'' long from the center of the screw to the other edge.

Q: 10. Does it fit arri's 19mm evf?

A: Notification is not appearing for use of the Wooden Camera 19mm End Cap for Air EVF Mount with the ARRI 19mm EVF products. The Wooden Camera 19mm End Cap for Air EVF Mount is listed for use with the Wooden Camera Air EVF products, like the Wooden Camera AIR EVF Mount with Friction Knuckle & 15mm Rods for ARRI ALEXA Mini MVF-1.