The Beachtek BT-PWR D-Tap to 2-Pin LEMO Cable for DXA-ALEXA/CINEfrom Beachtek BT-PWR D-Tap to 2-Pin LEMO Cable for DXA-ALEXA/CINEis an 18" cable for connecting a V-mount or Gold mount battery to a Beachtek DXA-ALEXA preamplifier or a DXA-CINE audio adapter (sold separately). The 18" cable has a D-Tap on one end and a 2-Pin LEMO connector on the other.

D-Tap to 2-Pin LEMO    18" Cable Length    Powers DXA-ALEXA and DXA-CINE from D-Tap

Related Questions and Answers

Q: 1. Can it only mount on rods or does it have 1/4-20 screw mount?

A: The Beachtek DXA-ALEXA has three threaded 1/4/20 holes in the base of the unit.

Q: 2. Do you need any special attenuator cables to make it work with the Canon R5C or will a 5-pin XLR to 3.5mm work?

A: You could use an XLR 5-pin female to 3.5mm TRS male cable like the Wooden Camera Single 3.5mm TRS to 5-Pin Female XLR - 18" (B&H # WO808010) to send line level audio from the Beachtek DXA-ALEXA Low-Noise Preamplifier to the Canon EOS R5 C Mirrorless Cinema Camera. As another option, you can use the 3.5mm mic output on the DXA-ALEXA to send mic level audio to the camera's 3.5mm TRS input.

Q: 3. Would this cable power a non-Teradek brand, 2-pin lemo device? Specifically, a different brand video transmitter.

A: There should be no issue at all. However, prudence dictates that you should check the polarity of the connections before hooking it up.

Q: 4. Does it work with DSLR and Mirrorless cameras?

A: This camera audio adapter is made specifically for cinema cameras with particular connections. I would consider the Beachtek DXA-MICRO-PRO PLUS Active Audio Adapter for DSLRs and Camcorders, BH #BEDXAMICROPP, which has a 3.5mm mic level output that is more appropriate for DSL or Mirrorless camera mic inputs.

Q: 5. We could use this on the Amira 5-pin input as well, right?

A: The balanced 5-pin output will have the same pin configuration for everything in that line.

Q: 6. Will this work on the smallHD 503 ultrabright?

A: Yes, as long as the polarity matches.

Q: 7. Will this power a Zacuto Kameleon which also takes a 4-pin LEMO connection?

A: The Tilta D-Tap to 4-Pin LEMO cable and the Zacuto Kameleon might work. However, we do have the D-Tap cable that is made specifically for the Kameleon available on our site. BH#: ZAZSPVC

Q: 8. This Beachtek unit has such a better layout than most of Beachteks other models, not to mention its very aesthetically pleasing. Its a little disappointing that they specify this unit as being engineered for one or two cameras in particular. Would this also be usable with a DSLR like the Canon 5Dmk3 or a small video camera like the Canon XC-10? Or are the higher quality components advantages only realized with the Alexa or a RED unit? Thanks in advance

A: It was designed withe ALEXA in mind: Line Out: 5-pin balanced output at +4 dBu.But there is no reason it could not be used with other cameras: Mic Out: 3.5 mm unbalanced auxiliary stereo output

Q: 9. Are these both male connectors?

A: Yes, they are.

Q: 10. Can this cable be used to power a Teradek Bolt 500 XT?

A: Yes it can.