Use the aluminum ARRI Studio Bridgeplate 12" Dovetail Plate 15mm Rodswith two tapered, 12" 15mm rods to easily mount and unmount your camera and accessories. The studio-offset rods are spaced 100mm apart. One 1/4"-20 and one 3/8"-16 screw allow mounting a variety of cameras, and the plate locks and slides up and down the rods with the use of a locking lever.

The studio bridgeplate is attached by 1/4"-20 and 3/8"-16 screws to an aluminum, Teflon-coated ARRI standard dovetail plate. The 12" plate has a tapered ARRI dovetail that allows you to adjust your bridgeplate by easily sliding back and forth. A stopper screw on one end and a safety latch on the other prevent the bridgeplate from accidentally sliding off the plate. There are twelve 1/4"-20 and five 3/8"-16 threads down the center of the plate for mounting.

A flat screwdriver is provided to tighten the mounting screws, and it can be attached to the bridgeplate with a magnet.

ARRI Standard Studio Bridgeplate    12" ARRI Standard Dovetail Plate    15mm Rods with 100mm Spacing    1/4"-20 and 3/8"-16 Captive Screws    12" Rods    Locking Levers for Tightening    Anodized Aluminum Construction

Related Questions and Answers

Q: 1. Is this dovetail also compatible with SmallRig 4002 dovetail base plate?

A: As the Kondor Blue 12" ARRI Lightweight Dovetail Plate (Black) is listed as ARRI standard, it should be compatible with the SmallRig 15mm Dovetail Baseplate, but we would recommend using a SmallRig dovetail plate for the best compatibility.

Q: 2. does it work with the tilta plate for the sony FX6? https://www.bhphotovideo.com/c/product/1633917-REG/tilta_es_t20_qrbp_quick_release_baseplate_for.html

A: No, Tilta Quick Release Baseplate for Sony FX6 is only compatible with Tilta dovetail plates. 8Sinn 5" ARRI Dovetail Plate is design for ARRI clamp mechanism.

Q: 3. Will this work with an fs7?

A: You can mount an FS7 on this 15mm Base Plate.

Q: 4. What is the load weight limit for this? Is it okay for URSA Mini Pro and Canon 400mm f4?

A: Unfortunately 8Sinn does not offer payload limit specs for the 8Sinn 15mm Baseplate + Riser Plate I + 10" ARRI Dovetail Plate Bundle. However, This is a strong solution and should be able to hold your camera and lens payload safely.

Q: 5. Can this be used with the Lumix S5 Cage?

A: Yes, you can use any cage that has a 1/4"-20 and/or 3/8"-16 thread with the 8Sinn 15mm Baseplate + Riser Plate I.

Q: 6. Is there a difference between the black and gray versions (other than color)? The safety buttons appear different.

A: Only the color changes. There are no differences with the two models of Kondor Blue 12" ARRI Lightweight Dovetail Plate other than the color that could match your cage or preference of color..

Q: 7. Does this work with Komodo Cage? And does this put the camera to correct 15mm LW height?

A: NO this will not place the Komodo at the correct 15mm LW height, the komodo will require a base plate designed for that camera

Q: 8. Will this work with the ARRI Alexa LF to connect the camera to an OConnor Ultimate 1040 tripod?

A: Yes, the Proaim 19mm Studio Bridge Plate with ARRI-Style Dovetail (10") will work with the ARRI Alexa LF to connect to an O'Connor Ultimate 1040 tripod.

Q: 9. What's the spacing between the rods? Is it the standards 60mm or one of the studio widths?

A: This provides 15mm studio. The rods are 100mm apart.

Q: 10. Will this plate work with the Arri Digi-Cine Baseplate for 19mm rods?

A: No, these are two different systems of mounting an ARRI baseplate.