The CAMVATE Universal C-Clamp with 1/4"-20 and 3/8"-16 Threads can clamp onto flat surfaces like a desktop or cylinders/tubes such as C-stand arms or light stand shafts for mounting a lightweight camera, light, or monitor. The clamp has a range of 1/8 to 1.65", and the jaws of the clamp feature vinyl sleeves that protect the surface you are clamping to from marring. The clamp features twelve threaded 1/4"-20 accessory mounting holes along both sides and the spine, as well as a single 3/8"-16 threaded mounting hole.

Clamps onto Surfaces up to 1.65"    Clamps onto Flat or Cylindrical Surfaces    Non-Marring Clamping Surface    1/4"-20 and 3/8"-16 Mounting Holes

Related Questions and Answers

Q: 1. Will this stretch far enough for a iphone 7+ (with small case) to fit?

A: Hello AdamThank you for your question! Our unit will indeed stretch far enough to fit with your Iphone 7+ if your case is not too thick. Our unit stretches approximately to 3 1/4 inches. Make sure your Iphone with the cage is within those dimensions.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 2. Does it fit on a tripod?

A: On a tripod head, yes, via the 1/4-20"screw.

Q: 3. Will this clamp unscrew far enough to fit the main pole diameter of a universal C stand?

A: This clamp has a range between 0.12 to 1.65 inches. The C-Stand will need to have a diameter between those numbers for it to clamp on to it.

Q: 4. Does this include 1/4-20" screws to attach to a tripod foot, or are additional screws needed to attach the cheeseplate?

A: It does not include 1/4"-20 screws. The plate includes four M4 screws. Your tripod foot should have a 1/4"-20 or 3/8"-16 screw or thread to attach to the CAMVATE Multifunction Cheese Plate.

Q: 5. If not can you recommend one that looks like this with cold shoe? Thanks

A: Here is a similar option with a cold shoe adapter, BH #SHSPTM .

Q: 6. Does this tightening lever ratchet?

A: Yes, the tightening lever on the CAMVATE NATO rail clamp ratchets.

Q: 7. Is it made of aluminum or steel?

A: This is believed to be made of steel.

Q: 8. Can I use this as a VESA for a laptop mount tray, and connect the VESA to a 1/4 boom arm? In Little words, can I use this as a adaptor for a laptop mount tray connected to a boom arm?

A: The VESA Compatibility on this CAMVATE Multifunction Cheese Plate with 1/4"-20 and 3/8"-16 Threads would be 75 mm.

Q: 9. Is the 260 g weight in the specs for two clamps or for one clamp?

A: The Net weight for the SmallRig Super Clamp with 1/4"-20 and 3/8"-16 Threads (Pair) is 260g. So the pair Net Weight is 260g.

Q: 10. Hello - can I add an additional 3/8-16 bolt in the middle to attach to a video camera? Can I fit both the 1/4-20 and the 3/8-16 bolt on the middle?Thank you.

A: We are not completely sure but would be of the opinion that no more holes could possibly be made in this piece of metal.