Camvate 15Mm Micro Rod Stud 1/4"-20 Threads & Screw

Camvate 15mm Micro Rod Stud 1/4"-20 Threads & Screw

Product Code: eq57044
Availability: In Stock

$19.41 $31.06

Qty

10 reviews Write a review

Description
Reviews (10)

The aluminum and stainless steel CAMVATE 15mm Micro Rod Stud 1/4"-20 Threads & Screwfrom CAMVATE 15mm Micro Rod Stud 1/4"-20 Threads & Screwincludes a 15mm micro rod and 1/4"-20 male to 1/4"-20 male double-ended screw adapter, used for camera, monitor, and 15mm rod clamp systems. The double-ended screw adapter fits a 1/4"-20 mounting thread on either end. The 15mm micro rod is 0.8" long and features four M5 threads on the side.

Standard 15mm Diameter 1/4"-20 Screw on Top 1/4"-20 Thread on Bottom M5 Threads on Side Aluminum & Stainless Steel Construction

Parameters
Material of Construction	Aluminum, Stainless Steel
Mounting	1 x 1/4"-20 Male to Male Screw Adapter 2 x 1/4"-20 Female Threads 4 x M5 Threads
Rod Diameter	15 mm
Length	0.8" / 20 mm
Weight	0.6 oz / 17 g
Packaging Info
Package Weight	0.045 lb
Box Dimensions (LxWxH)	1.95 x 1.25 x 0.65"

Related Questions and Answers

Q: 1. Is the t-shaped handle available as a spare part ??

A: We do not have just the T-Handle as a separate part on our website.

Q: 2. Will my Avenger D600 boom sit securely on the 3.5" Impact Double Ended Spigot with 5/8" Stud and 1/4"-20 Threads?

A: Yes, the Impact Double Ended Spigot can insert into the stand mount of the Avenger D600 boom, as long as there is a secure connection below it.

Q: 3. Can I use this as a VESA for a laptop mount tray, and connect the VESA to a 1/4 boom arm? In Little words, can I use this as a adaptor for a laptop mount tray connected to a boom arm?

A: The VESA Compatibility on this CAMVATE Multifunction Cheese Plate with 1/4"-20 and 3/8"-16 Threads would be 75 mm.

Q: 4. Will this clamp unscrew far enough to fit the main pole diameter of a universal C stand?

A: This clamp has a range between 0.12 to 1.65 inches. The C-Stand will need to have a diameter between those numbers for it to clamp on to it.

Q: 5. Does it fit on a tripod?

A: On a tripod head, yes, via the 1/4-20"screw.

Q: 6. What is the maximum weight that the stud can support? i.e. The super clamps say 33 lbs, and the tripod head say 6.6 lbs, but does that mean the stud can support a maximum of 7.6 lbs: 1lb (Weight of 056 3D Junior Pan/Tilt Head) + 6.6lbs (Load capacity of the 056 3D Junior Pan/Tilt Head) = 7.6lbs? I cant seem to find this information anywhere. Thanks!

A: I don't have a specific weight for you, but I regularly use an 8 lb camera setup on the stud at a pretty sharp angle and I have not had any problems. Be careful to not over tighten as the soft brass metal will twist off fairly easily.

Q: 7. Will this fit the Tilta Advanced Ring for the RS2?

A: Yes, the CAMVATE Super Crab Clamp will fit the Tilta Advanced Ring Grip.

Q: 8. Will this allow me to install a light mount, specifically a Godox S2, onto a standard tripod which has a QR plate with 1/4 x 20 threads?

A: Yes.

Q: 9. Does this include 1/4-20" screws to attach to a tripod foot, or are additional screws needed to attach the cheeseplate?

A: It does not include 1/4"-20 screws. The plate includes four M4 screws. Your tripod foot should have a 1/4"-20 or 3/8"-16 screw or thread to attach to the CAMVATE Multifunction Cheese Plate.

Q: 10. the secure pins are removable? I have an e2 tilta cage and it has only one pin and one 1/4 screw for mounting

A: No, the anti-twist pins on the Tilta 15mm Rod Holder to 1/4"-20 Anti-Twist Screw (Side Mount) are not removeable.

Yoram	25/09/2024
[0.6 oz / 17 g] This clamp will mount on your 15mm rods and become a perfect mounting point for an accessory. I use it to attach a Ninja Star or Ninja 2, sometimes I use it to attach an audio mixer...works flawlessly and priced reasonably. 5

Jason	25/09/2024
[0.045 lb] This is a great addition to my camera rig. 5

Gregory	05/09/2024
[15 mm] So far they have connected three different manufactures rods without issue. The red is a great choice. Basically if you see red your rods are not connected all the way. 5

Loren	25/07/2024
[0.6 oz / 17 g] B&H tells you this has 1/4 mounting holes. This is true on the ends, but the side holes are slightly smaller m5 threaded. (Source: Amazon description) I'm waiting for my second set of adapters to arrive in the mail to test. Definitely not 1/4, and definitely annoyed. The product is otherwise exactly what you would expect. 5

James	15/07/2024
[0.6 oz / 17 g] For this little piece of hardware is exactly what I need it for. I am Mount my viewfinder from my FX9 on this whole using a Zacuto Graticle EYE as my primary eyepiece. This micro rod allows me to place the viewfinder securely anywhere on my camera with its threaded bottom. 5

Matthew	26/06/2024
[15 mm] Perfect piece. 5

Daniel	25/06/2024
[15 mm] I'm using this to standoff a Ricoh Theta V 360-camera from a monopod. Works great for creating enough distance to keep stand out of the shot. 5

Brian	23/06/2024
[0.045 lb] Bought this to work with my IKAN cage. 5

Jon	19/04/2024
[0.8" / 20 mm] Very solid aluminum construction. Thumb wheel has additional knurling for added grip. The rod clamping screws are not the "ratchet" type, but this hasn't been a problem so far - they are short enough to spin a full 360 and clear other bits. For the price, worth tossing a few in the camera bag. 5

Peter	15/04/2024
[0.8" / 20 mm] It works on my shoulder rig for mounting my Zoom H5. Costs less that half of the next more expensive one I saw. I’m buying other things from Camvate now. 5