[0.135 lb] I finally got a chance to use the T-ring on my friends Nikon Z-50 camera. It worked well with the extension tube I had and the T-ring fit the camera perfectly.

[1.4 oz / 39.0 g] Basic adapter to facilitate mating camera (Nikon) to my Celestron Edge HD 11 SCT. Works perfect as it should.

[1.4 oz / 39.0 g] It works just fine.

[1.4 oz / 39.0 g] You get super quality plus flexibility to attach different accessories via its removable inner sleeve. VERY well made.

[0.135 lb] I have an older model spotting scope that had long ago been used on a 35mm film camera and now wanted to try it on a Canon EOS camera. Talked to camera support and the this is the ring I needed for scope to work with my Canon. From preliminary testing, works great and now to see just how good it can be. I expect it to give good to great results.

[1.4 oz / 39.0 g] This dovetail clamp is well made and has a quality finish. I am building my own custom telescope mount and this clamp should be a secure fixture for my application. The clamp accommodates Vixen-style dovetail bars and should support small to medium size telescopes without a problem. However, I would NOT put a large, heavy telescope on this clamp.

[1.4 oz / 39.0 g] Needed something to get the Nikon Z onto my telescope. This works very well, rock steady...

[0.135 lb] I recently purchased a Nexstar C5. I wanted to replace the 1 1/4" Visual back adapter and supplied diagonal. The Baader Short T adapter allows the use of the Baader T2 prism on this telescope. This combination has full clearance from the drive base at zenith. Some thing that you have to be very careful of when you replace any of the optical path with larger or better products. It also allows for clearance when the Celestron Wi-Fi adapter is inserted into the base. For the smaller nextar mounts the adapter is almost directly under the telescope but at an angle. The combination of this T adapter with the prism is very efficient tight and requires no set screws. It absolutely looks like how this mounting should've been done originally. Please note that the prism is the smallest T2 diagonal that Baader makes with the 32 mm clear light path. And normally comes equipped with an 1 1/4" nose piece on one side and an 1 1/4" eyepiece holder with helical fine focuser on the other. Simply unscrew the nosepiece from the prism and replace it with this short T adapter. There are larger diagonals with both mirror and prism in the Baader line and I cannot vouch for clearance with those models.

[0.135 lb] Fits perfectly onto my declination bracket. Thanks!