The white DPA 4061 CORE with 3-Pin LEMO Adapter is a miniature, moisture-resistant lavalier microphone designed for use with wireless systems for broadcast, performance, and theatrical applications. The low-sensitivity electret-condenser capsule can handle loud vocalists, speakers, and performers and delivers crisp, clear, and intelligible audio, while the rugged yet unobtrusive design is well suited to the demands of professional live stage work and presentations.

This version of the 4061 uses DPA's CORE technology to deliver a 4 dB increase in dynamic range and a 14 dB reduction in noise over the 4061 Legacy model. The mic includes two interchangeable capsule-protection grids that alter the sonic character of the microphone. The High-Boost Grid creates a peak at 12 kHz, helpful for chest placement, while the Soft-Boost Grid offers a subtle boost between 8 to 20 kHz, lightly enhancing signal presence to ensure clarity.

With an SPL rating of 144 dB, the microphone is more than capable of handling loud speakers, vocalists, and presenters. The mic can also be used very effectively to capture instruments—making it a flexible tool for houses of worship and live event productions. The 4061 CORE is powered by 5 to 10V plug-in power from a wireless transmitter and features a modular design using a Microdot output connector. This version includes a 3-pin LEMO adapter compatible with Lectrosonics SSM, Sennheiser SK, and Wisycom MTP transmitters.

For Theater, Film, TV, and Presentation    Omnidirectional for Consistent Levels    For Lectrosonics Transmitters with LEMO    For Loud Speech/Vocals up to 144 dB SPL    IP58-Certified Dust & Moisture Resistant    CORE Increases Dynamics & Reduces Noise    Modular Adapter System for Transmitters    Requires 5 to 10V or Phantom Power    Includes Soft- and High-Boost Grids

• Lectrosonics: Works with Lectrosonics transmitters equipped with a 3-Pin LEMO connector, including the SSM and the DBu. Also supports the Sennheiser SK Series and Wisycom MTP.
• The modular design allows you to adapt the 4061's Microdot connector to a wide variety of transmitters simply by purchasing the compatible adapter—saving you the expense of buying another microphone.

The DAD6001 Microdot to 3-pin XLR adapter (available separately) allows you to power the 4061 from 12 to 48V phantom power for wired applications.

Related Questions and Answers

Q: 1. Is there a Sony version of this microphone? I don't see any listing for Sony. I understand that the Sony wireless mic's have a different pin configuration for power.

A: What you could do is get the DPA Microphones 6060 CORE Subminiature Normal Sensitivity Omni Lavalier Microphone - Black (B&H # DP6060OCUB00) with a Microdot connector, not packaged with any adapter, then purchase the compatible Sony adapter separately. For the Sony adapter, you can use the DPA Microphones DAD6019 Microdot to 1/8" Mini Connector for Sony Transmitters (B&H # DPDAD6019) or the Deity Microphones DA35S Microdot to Locking 3.5mm Adapter for Sony Transmitters (B&H # DEKSMDTDA35S). The DPA adapter is made in Denmark and the Deity adapter is made in China. Both adapters will work to enable compatibility with a Sony transmitter. When purchased separately, the 6060 CORE with the Microdot connector and DPA's Microdot adapter for Sony come out to the same price as the 6060 CORE that comes packaged with the Sennheiser adapter.

Q: 2. Do these come with the metal clips and space brackets? If not, which clip/brackets are compatible?

A: Yes, the DPA Microphones Clear Concealer Top for d:screet 4060/61/62/63/71 does include the metal clip and space brackets. I confirmed this information with DPA.

Q: 3. Would it work with the Sennheiser EW100 G3?

A: This adaptor is for DPA to Sennheiser wiring standard: B&H # DPDAD6034

Q: 4. How would I use this microphone with a GoPro Hero5? I would like to keep it as simple as possible.

A: This DPA 4060 has a locking 3.5mm connector and it also requires 5 to 10V of plug-in power so I would not recommend it for use with the GoPro Hero5. The 4060 is really designed for use with a wireless transmitter, not for direct connection to a camera. Additionally, the 3.5mm GoPro mic adapter has a standard non-locking input so the mic will not be connected securely and it is very likely that the mic may require more voltage than the camera can supply. You definitely can use the DPA 4060 with a wireless mic system such as the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System - A: 516 to 558 MHz (B&H # SEEW112PG4A) -- you can choose the frequency band. The wireless transmitter will supply the proper voltage for the mic and the wireless receiver will connect to the GoPro Pro 3.5mm Mic Adapter (B&H # GO35MA) without any problems. We also have other wireless mic systems that use the same type of locking connector and wiring as Sennheiser which would be compatible with with the 4060 mic. We can also help you to select a different mic if you do prefer to use a wired mic with the Hero5. Please contact us by phone or through live chat on the website for further assistance.

Q: 5. Could you use this Tentacle adapter to connect the Deity W.Lav Pro and a Sennheiser G3/G4 transmitter?

A: Yes, the Tentacle Sync DPA Microdot to 3.5mm TRS Microphone Adapter should work since it has a locking connector. As a another option, you can use the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter (B&H # DEDA35).

Q: 6. Could work with Sony EWP D SERIES ?

A: Yes. The DPA Microphones 4060-OC-C-C00 CORE Normal-Sensitivity Omni Lavalier Microphone has a Microdot connector which can be used with an adapter to enable compatibility with Sony UWP-D series transmitters. For example, you can use the DPA Microphones DAD6019 MicroDot to 1/8" Mini Connector for Sony (B&H # DPDAD6019).

Q: 7. whenever i am using this tl45,the ambience noise is too much so what can i do to reduce the feedback or howling that is producing?

A: Do not stand in front of the speaker while the miocrophone is live. It also sounds as if the mic gain may be too high. Try lowering it so the backgrounf noise fade away and you are left with the louder speaking voice.

Q: 8. New to all this and trying my best. I'd like to buy this microphone to use for filming for a YouTube show. What do I connect this to in order to capture audio while filming?

A: In addition to its high quality components, the DPA Microphones 6060 CORE Subminiature Normal Sensitivity Omni Lavalier Microphone adds value in its versatility in connector options. Depending on your workflow and current equipment setup, this mic could be paired with a connector for a wireless mic system or hardwired into a recorder's audio input. Please email us at audio@bhphotovideo.com if you would like to have a more in-depth discussion on the options and possibilities for using the DPA 6060.

Q: 9. (Sorry-- unable to edit previously submitted question about difference between two similar stereo pairs of 4061 being offered by B&H) Specifically, I'm wondering if there is any downside to the newer (I presume) model. That is, is it equal to, or better than, the older 4061, in every technical detail? Thank you. DG

A: The DPA Microphones d:screet Core 4061 is much improved over the original "legacy" 4061: as described on the B&H Webpage: DPA Microphones d:screet Core 4061 The Core 4061 miniature microphone amplifier delivers a 4 dB increase in dynamic range and a 14 dB reduction in THD (total harmonic distortion)

Q: 10. is this lavalier compatible with my Sennheiser EW 512P G4 wireless system? can I plug it straight into the transmitter?

A: Yes, the DPA Microphones 6060 CORE Subminiature Normal Sensitivity Omni Lavalier Microphone with Locking 3.5mm Sennheiser Adapter is compatible with Sennheiser EW 512P G4 transmitters.