The medium, black DPA 4066 Omnidirectional Headset Microphone, MicroDot, Medium, Blackfrom DPA 4066 Omnidirectional Headset Microphone, MicroDot, Medium, Blackis designed for theater and broadcast applications. The previous Legacy 4066 omnidirectional headset mic is known for working across a wide dynamic range as well as exhibiting low distortion across all SPLs. However, the Core 4066 microphone delivers a 14 dB increase in both THD (total harmonic distortion) and dynamic range, which improves clarity and openness more than the Legacy model.

The Core 4066 features a double vent protection system that works in tandem with a drop stopper and water-resistant materials in the mic, which help prevent damage from humidity. High- and soft-boost grids, along with five foam windscreens, are included.

For Broadcast and Theater Applications    Left- or Right-Ear Mounting    Humidity-Resistant Design    Silicone Hose-Covered Earhooks    14 dB Increase in THD and Dynamic Range    Core Amplifier Increases Performance    Includes High- and Soft-Boost Grids    Includes 5 Foam Windscreens

Resistant to humidity

Double-vent protection system

Available in three colors and three sizes

Modular adapter system fits most professional wireless systems

Related Questions and Answers

Q: 1. Is this compatible with the Shure ADX1M?

A: Yes, the DPA Microphones DAD6010 Microdot to 3-Pin LEMO Adapter is compatible for use with the Shure ADX1M Digital Micro Bodypack Wireless Transmitter.

Q: 2. Is there a converter from lemo to 3.5mm ?

A: No, B&H does not offer an adapter to convert the 3-pin LEMO connector to 3.5mm. As another option, you may want to consider using the Microdot version of the Shure TwinPlex TL48 which is the Shure TwinPlex TL48 Omnidirectional Lavalier Microphone - Microdot, Tan (B&H # SHTL48TOMDOT). This would allow you to use the TL48 mic with a variety of Microdot adapters to enable compatibility with different wireless microphone transmitters. For 3.5mm, you could use the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter - Black (B&H # DEDA35) and for 3-pin LEMO, you can use the Deity Microphones DA3L Microdot to 3-Pin LEMO Adapter (B&H # DEKSMDTDA3L).

Q: 3. Can I use this with a Shure 47 or Sanken COS11D Lav that has a microdot connector? If not, what is the best solution, please. Thanks

A: Any microphone with the Microdot connector is expecting a DC bias level to bias the electret capsule. Normally the microdot connector of a bodypack will have approx 5 V DC bias. This DPA adapter is not just a simple resistive divider - it has a complete circuit board with biasing circuit and buffer amplifier to drive long mic cables. I measured 8 V open-circuit, and 2.5 V with my DPA 4066 headset connected. This leads me to believe that the final DC voltage level will depend on the bias current drawn by the specific brand/model of electret mic you connect to it (but it will never exceed 8 V). So, although I have not tested the particular models you mentioned, I believe that any microphone with a microdot connector can be used with this adapter without risk of damage. This is certainly a very nicely-made adapter with no expense spared on the circuit from what I can see.

Q: 4. Could you use this Tentacle adapter to connect the Deity W.Lav Pro and a Sennheiser G3/G4 transmitter?

A: Yes, the Tentacle Sync DPA Microdot to 3.5mm TRS Microphone Adapter should work since it has a locking connector. As a another option, you can use the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter (B&H # DEDA35).

Q: 5. Can this adapter be used to connect to a dpa microphone for saxophone?

A: The Tentacle Sync DPA Microdot to 3.5mm TRS Microphone Adapter is specified for use with DPA lapel microphones. Although other DPA microphones may have compatible microdot connections, the Tentacle Sync would not be able to provide the power output they require to work properly.

Q: 6. How does one go about the actual wiring process between the microdot connection and the xlr?

A: Simply plug the microdot on one end, and the XLR on the other, the adapter is inside.

Q: 7. Can i use it on Sony Wireless microphones? Like Sony UWP

A: No, use this instead link below its designed for Sony uwp https://www.bhphotovideo.com/c/product/1612120-REG/deity_microphones_daksmicrodotda35s_da35s_microdot_to_sony.html?sts=pi&pim=Y

Q: 8. Does this mic work with the Deity Theos System?

A: Yes, the RODE Lavalier II Omnidirectional Lavalier Microphone can be used with the Deity Theos wireless system.

Q: 9. Would it work with the Sennheiser EW100 G3?

A: This adaptor is for DPA to Sennheiser wiring standard: B&H # DPDAD6034

Q: 10. would phantom power from a cinema camera power this microphone unit or would you need mixer/recorder?

A: Yes, this will work with any pre-amp that supplies 12v - 48v. If your camera has the option to switch the Phantom down to 12v, you should do so and save a little battery life.