The medium, black DPA 4066 Omnidirectional Headset Microphone LEMO Connectorfrom DPA 4066 Omnidirectional Headset Microphone LEMO Connectoris designed for theater and broadcast applications. The previous Legacy 4066 omnidirectional headset mic is known for working across a wide dynamic range as well as exhibiting low distortion across all SPLs. However, the Core 4066 microphone delivers a 14 dB increase in both THD (total harmonic distortion) and dynamic range, which improves clarity and openness more than the Legacy model.

The Core 4066 features a double vent protection system that works in tandem with a drop stopper and water-resistant materials in the mic, which help prevent damage from humidity. High- and soft-boost grids, along with five foam windscreens, are included.

For Broadcast and Theater Applications    Left- or Right-Ear Mounting    Humidity-Resistant Design    Silicone Hose-Covered Earhooks    14 dB Increase in THD and Dynamic Range    Core Amplifier Increases Performance    Includes High- and Soft-Boost Grids    Includes 5 Foam Windscreens

Resistant to humidity

Double-vent protection system

Available in three colors and three sizes

Modular adapter system fits most professional wireless systems

Related Questions and Answers

Q: 1. Do these work with Sennheiser belt packs?

A: No, the Pyle Pro PMHM2 Omnidirectional Headset Microphone has a non-locking 3.5mm connector for wireless transmitters like the RODE Wireless GO II or DJI Mic. As a compatible option for Sennheiser wireless transmitters, you can use the Polsen ESM-2-35H Dual-Sided Earset Microphone (B&H # POESM235H), which is close in price and has the locking 3.5mm TRS connector.

Q: 2. will this work with the ew100 g3 body pack?

A: Never paired with ew100 g3 kit, but over all it does work good. Kept as a spare accessory if ever ew100 kit goes bad. Even recorded voice over on computer(pinky 3.5mm microphone in jack).good economic product.

Q: 3. Can this measure how quiet a room with some accuracy or is it strictly loudness meter?

A: According to MicW, the i437L can measure sound levels as low as 30 dBA, which may be adequate for you. If you want to measure ambient levels in special rooms, such as recording studios or other spaces where sound isolation is critical, then you may need a measurement mic with a larger diaphragm (e.g. 1/2 ) to get an accurate reading of the acoustic noise floor.

Q: 4. Does anyone know if this would fit an Olympus WS-822 digital voice recorder? Thanks!

A: This mic is compatible with the Olympus recorder.

Q: 5. How is this mic powered? Is it an electret condenser?

A: The Shure DH5 DuraPlex Omnidirectional Headset Microphone is a condenser microphone that operates using plug-in power of 5V supplied from the mic input on a wireless bodypack transmitter.

Q: 6. Is it compatible with Rode wirelless go II?

A: Yes it is we tried it in Pro Audio store with Rode wireless it works

Q: 7. I'd like to know how long is the cable?

A: Cable measures 1 meter/39 inches not including connector.

Q: 8. How long is the cable?

A: The cable is about 1 meter in length.

Q: 9. Does this works with DJI Mic ? If i connect it to the 3.5mm port of the transmitter ?

A: Although we have not tested these two items together, the Polsen PL-4 Omnidirectional Lavalier Microphone with 1/8" (3.5 mm) Connector should be capable of use with the DJI Mic 2-Person Compact Digital Wireless Microphone System/Recorder for Camera & Smartphone.

Q: 10. Can I plug this mic into a regular audio interface Mic Pre?

A: Greetings: I am researching this question myself. First of all, there are a few microphones from Shure and Audio Technica that are made to directly plug in ot XLR fittings that go into a mixer board. The unit that is by Pyle most likely will require phantom power to work, since wireless body paks provide about 9 volts for energizing the microphone. A possible risk point with a direct connection is that phantom power typically is 48 volts, far beyond the scope of what this microphone is usually fed with. This is an involved subject,