The small, beige DPA 4066 Omnidirectional Headset Microphone MicroDot Connectorfrom DPA 4066 Omnidirectional Headset Microphone MicroDot Connectoris designed for theater and broadcast applications. The previous Legacy 4066 omnidirectional headset mic is known for working across a wide dynamic range as well as exhibiting low distortion across all SPLs. However, the Core 4066 microphone delivers a 14 dB increase in both THD (total harmonic distortion) and dynamic range, which improves clarity and openness more than the Legacy model.

The Core 4066 features a double vent protection system that works in tandem with a drop stopper and water-resistant materials in the mic, which help prevent damage from humidity. High- and soft-boost grids, along with five foam windscreens, are included.

For Broadcast and Theater Applications    Left- or Right-Ear Mounting    Humidity-Resistant Design    Silicone Hose-Covered Earhooks    14 dB Increase in THD and Dynamic Range    Core Amplifier Increases Performance    Includes High- and Soft-Boost Grids    Includes 5 Foam Windscreens

Resistant to humidity

Double-vent protection system

Available in three colors and three sizes

Modular adapter system fits most professional wireless systems

Related Questions and Answers

Q: 1. Could you use this Tentacle adapter to connect the Deity W.Lav Pro and a Sennheiser G3/G4 transmitter?

A: Yes, the Tentacle Sync DPA Microdot to 3.5mm TRS Microphone Adapter should work since it has a locking connector. As a another option, you can use the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter (B&H # DEDA35).

Q: 2. Is there a converter from lemo to 3.5mm ?

A: No, B&H does not offer an adapter to convert the 3-pin LEMO connector to 3.5mm. As another option, you may want to consider using the Microdot version of the Shure TwinPlex TL48 which is the Shure TwinPlex TL48 Omnidirectional Lavalier Microphone - Microdot, Tan (B&H # SHTL48TOMDOT). This would allow you to use the TL48 mic with a variety of Microdot adapters to enable compatibility with different wireless microphone transmitters. For 3.5mm, you could use the Deity Microphones DA35 Microdot to Locking 3.5mm Adapter - Black (B&H # DEDA35) and for 3-pin LEMO, you can use the Deity Microphones DA3L Microdot to 3-Pin LEMO Adapter (B&H # DEKSMDTDA3L).

Q: 3. How does one go about the actual wiring process between the microdot connection and the xlr?

A: Simply plug the microdot on one end, and the XLR on the other, the adapter is inside.

Q: 4. I need to plug the adapter into my mixer. Is the clip removable?

A: Yes. The clip is removable.

Q: 5. How do you remove the belt clip?

A: The clip on the DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter can be physically removed by sliding the clip component upwards towards the MicroDot connection.

Q: 6. What bodypack systems is the 3.5 mm ts compatible with?

A: The Pyle Pro PMHM2 Omnidirectional Headset Microphone can be used with any wireless bodypack transmitter that has a standard non-locking 3.5mm mic input such as the RODE Wireless GO II Compact Digital Wireless Microphone System/Recorder, the DJI Mic Compact Digital Wireless Microphone System/Recorder, the Saramonic Blink 500 Digital Camera-Mount Wireless Microphone System, and the Synco WAir Ultracompact Digital Wireless Microphone System, to name just a few. The PMHM2 can also be used with other devices that have a 3.5mm mic input including audio recorders, tablets, and computers.

Q: 7. Can this microphone be calibrated for use with OSHA noise level screening?

A: According to the manufacturer, each MicW i437L is calibrated at the factory and complies with the IEC 61672 Class 2 sound level meter standard. For any information about special calibration, please contact MicW. You can reach them by phone at 425-635-8117. The company's US offices are located in the state of Washington (Pacific Standard Tine).

Q: 8. Is it compatible with Rode wirelless go II?

A: Yes it is we tried it in Pro Audio store with Rode wireless it works

Q: 9. Can I plug this mic directly into my Nikon d7000 as an audio input for my video recordings?

A: The Polsen PL4 will work with the Nikon D7000, however since the PL4 mic has a mono connector, and the D7000 features a stereo mic input, your audio will only be recorded to the left side. This can be adjusted after the fact in most video editing software.

Q: 10. Can I connect this to Shure BLX1 wirless pack?

A: Yes, the Shure TwinPlex TL48 Omnidirectional Lavalier Microphone is compatible for use with the Shure BLX1 Wireless Bodypack Transmitter.