The 1" x 60 yd white ProTapes Premium Flatback Paper Console Tape 1" x 60 yd Whitefrom ProTapes Premium Flatback Paper Console Tape 1" x 60 yd Whitehas a backing that effortlessly unwinds, offers a high tensile strength; and is easily torn by hand. The PH-neutral synthetic rubber is a strong adhesive, but can be repositioned in case it was not applied correctly the first time. The tape is ideally used on sound and lighting consoles for labeling and color coding areas on the boards. The flatback paper backing also has a writable surface that can be marked with a pen or marker; and once the tape is used it removes cleanly, leaving no residue on the surface behind.

Flatback Paper Backing    30 lb per Inch Tensile Strength    Hand Tearable    5.8 mil Thickness    Writable Surface    Easy Unwind and Repositionable    Used for Labeling and Color Coding    Safe on Sound and Lighting Boards

Related Questions and Answers

Q: 1. can I splice 8mm movies or super 8 movies with this? If not, how do I splice old films together before having them transferred to thumb drive

A: This would not be suitable for 8mm tape.

Q: 2. Will this roll fit the Epson P900 I just purchased?

A: You can use it but only if you use the Epson SureColor P900 Roll Paper Adapter BH #EPC12C935221 which supports media up to 100' Long.

Q: 3. Is this 1" or 2"? The photo looks like 2" but the description says 1". Thanks so much!

A: 1" x 60 yd, White

Q: 4. How many 8x10's will this print?

A: In an ideal world with no waste at all, 10 ft is 1200 in, 1200/8 would translate into 150 prints. In reality it depends on your printer and the waste introduced before and after each print.For example I print 3 - 8x10 in a row, and my 4880 Epson printer leaves 0.75 inches on each end.So for every 3 8x10s I print, I use 25.5 inches. so 1200 in/25.5, is 47 prints with 3 8x10, in total that would be 141 8x10.And of course this is if you don't have to use some paper to clean you printer head.I hope this helps.

Q: 5. What is the best cloth based tape that is heat resistant and suitable for taping gels to reflectors and grids without being susceptible to the adhesive melting? Is spike tape any different to regular gaffer-type tape on this regard? Is there a gaffers tape that is of higher quality that meets this requirement in a narrow width, 0.5 " or less? Thanks!!

A: Spike tape is just 1/2" tape. Gaff tape is not typically used for high heat. C47 clips are more suitable.

Q: 6. Can this splicing tape be used to repair 36mm microfilm?

A: You could use this for 36mm microfilm.

Q: 7. I understand that this roll has a 2" core. I have a Epson P800 printer which takes a 3" core. Do you know of a 2" x 3" adapter so that I can use the roll?

A: This Luster Paper actually has a 3" core roll, so you should be good to go. Also take note that the roll assembly shaft has 3" adapters on it, & if you remove them you"ll have capability of doing 2" core rolls.

Q: 8. Would this be compatible with Epson 7900 and 7880 printers?

A: I has Epson 7600 printer. It was great! Thanks.

Q: 9. Has anyone used this on carpet? Does it remove well and not leave residue? I need to stick floor cable covers to a carpeted floor, but also need to move the cable covers from time to time. Thanks!

A: No these will not stick to carpet, we do sell "Secure Cord" Boxed Nylon Carpet Cable Cover in different sizes.

Q: 10. Will this fit the Epson SureColor P9000?

A: If you asking about the size - 44 inch - it will definitely work for P9000. If you are asking about the print quality then I can say that this paper works beautifully with the printer.