You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Buttkicker Lfe Low Frequency Audio Transducer

Buttkicker Lfe Low Frequency Audio Transducer
  • Product Code: eq57560
  • Availability: In Stock

$899.97 $1,340.96

Add a new dimension to your home entertainment setup with the ButtKicker LFE Low Frequency Audio Transducer. Think of the ButtKicker LFE as a "silent subwoofer" that you feel instead of hear. It utilizes a 3.75 lb magnetically suspended piston that responds to the low frequencies of movie soundtracks and game audio.

Simply attach it onto, or underneath, home theater risers and platforms. Then, wire it to the audio output of your components. It can connect to either the subwoofer output of a home theater system or to the left- or right-channel preamp output of a 2-channel stereo system. When activated, the ButtKicker LFE physically vibrates in sync with the low audio frequencies, providing you with a more immersive experience.

Add Rumble to Movies and Games    Supports Signals from 5 to 200 Hz    Works with Existing Subwoofers    Mounts to Risers & Platforms

Parameters
Frequency Response5 to 200 Hz
Nominal Impedance4 Ohms (inductive)
Power HandlingMinimum: 400 W
Maximum: 1500 W
ConnectorsSpeaker Wire (Positive/Negative)
DimensionsH x W: 5.4 x 5.4" / 13.7 x 13.7 cm
Weight11.0 lb / 5.0 kg
Packaging Info
Package Weight11.385 lb
Box Dimensions (LxWxH)7.75 x 7.65 x 7.45"

Requires a power amplifier that supports frequencies below 20 Hz, and power output between 400 to 1500W. Mounting hardware and speaker wire are also required.
Subwoofer Compatible - The ButtKicker LFE can be used with your existing subwoofer. If there is only one output, an optional Y-cable can be used.
Thermal Switch - The ButtKicker LFE is set to shut down automatically if it gets too hot in order to prevent damage to the unit.

Related Questions and Answers

Q: 1. Is this speaker provided with the necessary transformer?

A: It is not included. To ensure optimal listening experience, the installer must equalize the SolidDrive SD1 System. Equalization is accomplished by using the SolidDrive Drywall Passive Equalization Module (sold separately).

Q: 2. What transformer is to be used with this speaker?

A: The Solid Drive SD1 is designed for 8 ohm applications. We do not carry transformers for these units. For 70v/100v systems please contact the manufacturer directly toll free 855.663.5600 or sales@a href= http://mseaudio.com target= _blank mseaudio.com/a for support.

Q: 3. how many receivers can I use with one transmitter?

A: There is no limit to the amount of receivers usable with The Lectrosonics IFBT4 transmitter.

Q: 4. Will any of the pockets fit a https://www.bhphotovideo.com/c/product/1333711-REG/core_swx_core_n98s_6_6ah_lithium_ion_battery?

A: Yes, the Core SWX Nano V-Mount Battery will fit into the front or back pockets on the ORCA OR-268 Low-Profile Audio Mixer Bag.

Q: 5. will a AT829CW michrophone work with this?

A: Yes

Q: 6. Will this work as a replacement for the handheld mike in the ATW-T801-T2 System? Our handheld mike grew legs!

A: This microphone /transmitter is compatible only with Audio-Technica System 9 receivers on 169 to 172 MHz VHF frequency band.

Q: 7. is the neck mic good for Documentary (Interview) ?

A: The mic picks up very well for the person wearing it. A second mic would be needed for the interviewer.

Q: 8. If I attach two wireless recievers into the tabs in the front pocket, will the antenna stick out? If it will, can I tuck the antenna into the main bag and zip the pocket closed?

A: Yes, in the scenario described the receiver antennae would stick out of the front pocket of the ORCA OR-268 Low-Profile Audio Mixer Bag for Zoom F6 when unzipped. Depending on the antenna length and flexibility, there is the possibility of zipping the front pouch closed and allocating the aerials into the main compartment.

Q: 9. would it be possible to mount the orca bag, with the zoom f6 inside + attached npf battery to a c stand? using something like a gyrovu clamp + some other attachment? Looking to avoid leaving the orca bag/f6 on the floor as a one man band operator, and would be extremely handy to have the orca bag and zoom f6 at eye level

A: It may be possible to mount the ORCA OR-268 Low-Profile Audio Mixer Bag for Zoom F6 to a stand with a clamp as described. A more preferable solution could be found in a shelf accessory such as the Gator Frameworks Small Microphone-Stand Accessory Shelf (9 x 9") (BH #GAWSHELF0909), which has a 10 pound weight capacity and is also available in a larger size: https://bhpho.to/3Gw1dc7

Q: 10. I have 4 individual home theater seats. Should I use an advance or the mini for each seat?

A: The ButtKicker Advance Low Frequency Audio Transducer (B&H # BUBK44) would be a suitable option for more heavy duty seating. The right amplifier for this model would be the ButtKicker BKA-130-C Mini Power Amplifier for ButtKicker Transducers (B&H # BUBKA130C).

15/09/2024

[11.385 lb] I needed to connect a sub-mixer into the house system at a church for a special program. When I plugged the mixer into the sytem I got a huge amount of static and HF noise. When I turned on the mixer I got a local radio station broadcasting a basketball game! I inserted the AV1 and everything went away but some 60 cycle hum. Flipped the handy ground lift switch and silence. Zero noise! The difference was amazing, beyond my expectations. I highly recommend this product!

5
12/09/2024

[5 to 200 Hz] This case checks every box! It’s roomy, we’ll make, comes with rain/dust cover and it beautiful to behold!

I use a Sennheiser wireless mic system and the sides of the case will accommodate the receiver that plugs into the xlr mic inputs of my Zoom F6 field recording device and still zip shut.

Plenty of room for belt pack and lavalier mic inside the pocket of the case as well!

I would buy this case again tomorrow. The previous case I got from Zoom was a pain in every way and poorly engineered by comparison! JUST BUY IT!!!

5
12/09/2024

[5 to 200 Hz] A little hard to clasp the pronged straps to the Zoom but other than that it's great!

5
06/09/2024

[11.385 lb] I wrote a review earlier for this product, that it worked very well in removing noise from a setup plugging a mixer into a noisy church building system. I recently found another, unexpected use for this item. I also play guitar in a band. Those out there who may play an electric guitar with single coil pickups know that these instruments are subject to noise. My practice space has got some pretty noisy electrical wiring (mainly from multiple light dimmers), and I have always had problems with noise when playing my single-coil-equiped Stratocaster. I have done several things to reduce the noise, with variable amounts of success. The other day while playing, and experiencing a noisy condition, I had the idea of using this interface between the guitar and amp. Bingo! Quiet! Hard to believe, and it doesn't color the tone, either (not that I could notice, anyway). If guitar players get wind of this, sales of this product should skyrocket! (funny they don't advertise this -- Pro-Co makes guitar effects, notably the Rat overdrive pedal) At any rate, I will be including this from now on as part of my regular guitar setup.

5
27/07/2024

[11.385 lb] A really outstanding bag for the Zoom F6. Super sturdy, great design. I used the Zoom bag with the F4, and I liked it - but this is better. And frankly, the F6 would be difficult to use otherwise. I do recommend that you use it together with the large Sony NP-F9xx batteries, since they hold the F6 at the correct height to use easily. As many others have noted, fitting the F6 in the bag takes a little effort, but once you figure it out, it is easy enough.

5
22/07/2024

[11.385 lb] Just received and after a few minutes of wrangling the mounting quick-release straps for the F6 I'm pretty impressed with the bag. Another (the first) reviewer mentioned having to the thread the straps. At first, I thought the same thing (and started to spiral!) but realized with a little extra effort you can push the male buckle through the middle of the bar where it gives more and it works as intended. Perhaps a slightly lower profile snap would be better but it works and once in place it's solid and easy enough to remove.

5
13/07/2024

[5 to 200 Hz] The AV 1 Audio/Video High to Low Impedance interface by Pro-Co Sound is an invaluable tool for an facility that uses computer projectors and live sound. We have three in-house PA systems where various groups meet. Typically, images are projected from a laptop to a large screen. The AV 1 provides a quick, quiet connection between the computer or projector and allows us to pump the sound directly through the house system. Due to the multiple sets of inputs, it can be connected to a variety of sources without special adapters. The AV-1 also doubles as a direct boxes for plug-acoustic instruments. I recommend it highly.

5
04/06/2024

[11.385 lb] This is a great option for the Zoom F6! It can conformably fit up to 4 transmitters (2 in each side pouch)... and allows the connecting XLR cables to run inside of the bag, keeping everything cleaning connected. I definitely recommend this bag!

5
11/05/2024

[5 to 200 Hz] Excellent right out of the box. Very sturdy and delivers what it promises. I am a small local magicial entertainer and needed a device that I could hook up my Sony CD/IPOD player to my Fender Passport amplifier and speakers. Since I travel to many different types of locations, this seemed the ideal product to use...after trying other avenues. You wont be dissappointed in its performance.

5
11/05/2024

[5 to 200 Hz] Excellent right out of the box. Very sturdy and delivers what it promises. I am a small local magicial entertainer and needed a device that I could hook up my Sony CD/IPOD player to my Fender Passport amplifier and speakers. Since I travel to many different types of locations, this seemed the ideal product to use...after trying other avenues. You wont be dissappointed in its performance.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Auralex Deep6 Low-frequency Absorber 48x24"

$1,949.97 $2,456.96

Auralex Deep6 Low-frequency Absorber 48"x24"x6"

$1,949.97 $2,534.96

Soliddrive Sd1sm Sound Transducer For Wood

$1,950.00 $3,081.00

Soliddrive Sd1 Sound Transducer For Drywall

$1,950.00 $2,437.50

Dual Frequency Wireless Router

$9,408.00 $11,760.00

Buttkicker Bka1000-p Amplifier

$1,989.00 $2,983.50

Low Frequency Noise Cancelling Headphones

$237.00 $305.73

Eminence Asd:1001 1" High Frequency Driver

$119.97 $181.15

Eminence Nsd:2005s-8 High Frequency Driver

$344.97 $534.70

Manley Labs Enhanced Mid Frequency Equalizer

$9,897.00 $14,251.68

Istarusa D-260hb 2u Compact Hdd Bay Chassis

$1,274.88 $1,631.85

Products You May Like

Da-lite Tensioned Contour 60x96" Motorized Screen

$14,334.00 $17,200.80

Ashly Ecotour 1000.4 4000w 4-channel Amplifier

$5,997.00 $9,235.38

Camvate Cheese Plate With Arri Mounts

$84.00 $130.20