The A 1031-U Sennheiser A 1031-U UHF Antenna for Evolution Seriesis designed for use with the G2 series rack-mount receivers or RF distribution amplifiers. The omnidirectional RF pick up enables use in applications where the transmitters are constantly in motion, and RF signal is generated from various directions within a room.

360° Coverage    430 - 960MHz Frequency Range

Related Questions and Answers

Q: 1. Does this antenna work with my Sk/Ek 100 (516-558 frequency)? Thanks for your reply

A: This antenna only works in 558 to 626 MHz

Q: 2. If I'll use two A1031U antennas, with two 5m BNC cables, direct to the G1 EW 100 receiver, what is the optimal distance between them if I work on 550.000Mhz ?

A: For the best coverage you will want to place the antennae as far from one another as possible.

Q: 3. what wall mount should I use for this?

A: For the Sennheiser ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz) to be wall-mounted, I recommend the CAMVATE Wallmount Bracket with 1/4"-20 Female to 5/8"-27 Male Mic Screw (B&H # CAC1994).

Q: 4. Is the rate given for 1 antenna or a pair?

A: The antenna is a single unit, not a pair.

Q: 5. Does this work with G4 Evolution series?

A: Yes, the Sennheiser A1031U is compatible for use with Evolution G4 series wireless systems.

Q: 6. Does this come with a cable?

A: Connector cable and a mounting stand are not included with the Sennheiser A 1031-U Omnidirectional UHF Antenna for Evolution Series, B&H # SEA1031U.

Q: 7. Does this work with lectrosonics, sennheisers and zaxcom receivers and transmitters?And how exactly is it used?

A: The PSC UHF Log Periodic Antenna will provide the users of UHF wireless microphones a simple and elegant passive antenna solution for field use. This passive antenna from PSC provides coverage from 450MHz to 900MHz. This antenna offers a typical gain of 4.5dB over that of a dipole antenna, thus providing added range to your radio microphones in the field. The antenna features a robust design using a heavy duty 0.125 (3.175mm) fiberglass substrate. The PSC UHF Log Periodic Antenna is produced as a skeletal design. This design allows for lower wind loading in the field. The entire antenna is coated in a water resistant textured coating for years of trouble free operation in the field. In addition, we have equipped this antenna with the most robust Molex brand BNC connecter we could source. Mounting is accomplished via an industry standard 3/8 -16. ------------------------------------------------------------------------------Antenna Placement:Your PSC UHF Log Periodic Antenna should be mounted up and away from all of your other sound equipment. The antenna should be pointed toward the actor worn transmitters. Typically we advise that you place the antenna up at least 6 to 10 feet (2-3 meters) above your sound cart for best performance. The antenna can be mounted using an industry standard 3/8-16TPI threaded base.

Q: 8. it works with any wireless microphone systems

A: Thank you for your question. This antenna will work with any compatible rack mounted receiver or RF antenna distribution system in the same frequency spectrum that is able to have external antennas with BNC connectors

Q: 9. will this also work with G3 receivers?

A: Compatible with G3 as well.

Q: 10. Is this backward compatible with Evolution G3/G4?

A: Yes you can use the ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz) with Evolution G4 and G3 rack receivers.