Ninjatek Cheetah 3Mm 95A Tpu Filament 1Kg Water

Ninjatek Cheetah 3mm 95a Tpu Filament 1kg Water

Product Code: eq57862
Availability: In Stock

$237.00 $331.80

Qty

6 reviews Write a review

Description
Reviews (6)

Print your 3D model in water with the NinjaTek Cheetah 3mm 95A TPU Flexible Filament.

With a shore hardness of 95A, this thermoplastic polyurethane (TPU) flexible filament has 76% better abrasion resistance than PLA and 40% better abrasion resistance than ABS. The filament also has significantly better impact strength than widely used materials, including up to 84% better impact strength than ABS. At 580% elongation, the filament can handle wear and tear. The patented low-friction exterior allows for smooth feeding into an extruder. It is also resistant to many chemicals, such as naphtha, ASTM oils #1-3, petroleum, and freon.

3mm Filament Diameter 95A TPU Flexible Material

Parameters
Filament Diameter	3 mm
Filament Material	TPU
Filament Properties	Flexible, Translucent
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	3.3 lb
Box Dimensions (LxWxH)	10 x 9 x 3"

Related Questions and Answers

Q: 1. Will this item ever be available for the 40mm watch?

A: I am sorry the 40mm option in this case has been discontinued by the manufacturer and is no longer available

Q: 2. What are the inside dimensions of the tank?

A: According to the manufacturer, the interior dimensions of the Flic Film Precision Temperature Water Bath are 12" (30.48 cm) long, 6.25"(15.87 cm) wide, and 4.25" (10.8 cm) deep.

Q: 3. What is the highest temperature the device can achieve and maintain?

A: The manufacture does not list the temperature the heater works with but it is for processing so the Flic Film Precision Temperature Water Bath should be fine for regulating at 68 F. But note it does not have a cooler only a heater. So if the room you are in is over 68 degrees that could be an issue.

Q: 4. Do they sell these in black anywhere?

A: Unfortunately, these bags do not come in black.

Q: 5. Is this filament 3.00 mm or is it 2.85mm?

A: As stated in the title "NinjaTek NinjaFlex 3mm 85A TPU Flexible Filament (1kg, Lava)," the filament is 3mm.

Q: 6. What is the temperature range of the controller? Can it maintain 68 F, for black and white processing?

Q: 7. Any issues with durability of the sandbag?

A: I have not heard of any issues or complaints concerning the build quality or durability of the Matthews Water Repellant Sandbag - 25 lb.

Q: 8. Many reviews indicate this case being used with phones other than Pixel 4a 5g - Is it some sort of universal case and not one made for Pixel 4a 5g?

A: The, AVODA TPU Case for Google Pixel 4a 5G (Clear) BH #AVDGP4A5GCC is specifically designed for the Google Pixel 4a. Avoda makes this case for several different phone models and reviews are gathered from other models.

Q: 9. Will this work on the Think Tank belt?

A: Yes this pouch can work with a Think Tank belt.

Q: 10. What is the shore hardness? And can a printed part stretch?

A: The TPU Shore hardness is 94A, the printed model can be stretched, but it depends on the actual situation.

Jane	18/09/2024
[3.3 lb] I have printed (for work) seals for gripping soft materials as they dry, and flexible phone case and octopus, just for fun. Solid bodies with 50% infill have minimal give, though thin profiles are nicely flexible. 10% infill for flex in thicker sections. Rules for success with this: 1) Retraction OFF everywhere! 2) For Orig Prusa i3 Mk3S-max use the FLEX filament settings, change extrusion multiplier to 1.1, extruder temp to 230C, heated bed to 40C, max volumetric flow at 5 mm^3/s, no extrusion speeds above 50mm/s, fan for cooling above the 1st layer 3) Use hairspray on the bed 4) be prepared to clip stringing 5

John	23/08/2024
[3.3 lb] The material is ridiculously flexible, like soft spaghetti. I can do things few other filaments can. The material is very hygroscopic (Moisture Absorption) and in little time (2-3 hours of open exposure) shows evidence of hissing, popping at nozzle and surface anomalies on the print. The Ninjatek website does not really describe this well. First time users or inexperienced users do your homework on TPU filaments before jumping into this material. If you have the capability to print (nozzle and hot end) with your machine, regenerate/dehydrate and store this material, its awesome stuff. Made Covid-19 respirator masks that are conformal to facial contours. I will buy more. The sapphire color is absolutely stunning. 5

Riley	17/08/2024
[3.3 lb] I've printed more than 100kg of this material and shipped the 3D prints globally with zero defects, zero customer complaints, and zero returns. I only wish this would come in 8kg rolls rather than 2kg. This material also performs exceptionally when exposed to sunlight for extended periods. I've placed printed parts in direct sunlight for more than 6 months and experienced no degradation in color or flexibility. 5

Jamison	28/05/2024
[3.3 lb] I love it when it lasts a long time. I can start big prints and walk away! 5

Jason	17/05/2024
[10 x 9 x 3"] There are a lot of 95a tpus available and I have tried a ton of them. Without a doubt this is the best. It's a bit more expensive than most but well worth it. 5