Ninjatek Cheetah 1.75Mm 95A Tpu Filament 0.5Kg

Ninjatek Cheetah 1.75mm 95a Tpu Filament 0.5kg

Product Code: eq57865
Availability: In Stock

$135.00 $199.80

Qty

6 reviews Write a review

Description
Reviews (6)

Print your 3D model in water with the NinjaTek Cheetah 1.75mm 95A TPU Flexible Filament.

With a shore hardness of 95A, this thermoplastic polyurethane (TPU) flexible filament has 76% better abrasion resistance than PLA and 40% better abrasion resistance than ABS. The filament also has significantly better impact strength than widely used materials, including up to 84% better impact strength than ABS. At 580% elongation, the filament can handle wear and tear. The patented low-friction exterior allows for smooth feeding into an extruder. It is also resistant to many chemicals, such as naphtha, ASTM oils #1-3, petroleum, and freon.

1.75mm Filament Diameter 95A TPU Flexible Material

Parameters
Filament Diameter	1.75 mm
Filament Material	TPU
Filament Properties	Flexible, Translucent
Weight	1.1 lb / 0.5 kg
Packaging Info
Package Weight	2.135 lb
Box Dimensions (LxWxH)	9.1 x 8.1 x 3.25"

Related Questions and Answers

Q: 1. What is the shore hardness? And can a printed part stretch?

A: The TPU Shore hardness is 94A, the printed model can be stretched, but it depends on the actual situation.

Q: 2. Does Active Edge™ still when using this case?

A: Yes, Active Edge is still easily accessible and functions perfectly while using the AVODA TPU Case for Google Pixel 3a (Clear) BH #AVDGP3ACC.

Q: 3. Many reviews indicate this case being used with phones other than Pixel 4a 5g - Is it some sort of universal case and not one made for Pixel 4a 5g?

A: The, AVODA TPU Case for Google Pixel 4a 5G (Clear) BH #AVDGP4A5GCC is specifically designed for the Google Pixel 4a. Avoda makes this case for several different phone models and reviews are gathered from other models.

Q: 4. Will this item ever be available for the 40mm watch?

A: I am sorry the 40mm option in this case has been discontinued by the manufacturer and is no longer available

Q: 5. Will this filament work on an Ender 3 pro printer?

A: The FlashForge 1.75mm Wood-Filled Filament for the Dreamer, Inventor Series, and Adventurer 3 (0.5kg, Light Wood) meets the criteria for compatibility on the Ender 3 pro printer. However to obtain a successful print the proper profiles must be obtained for extruding, travel distance, and temperature, layer height, ect.

Q: 6. What percentage metal are these filaments? Or can you provide the density of the filament? Thx

A: The FlashForge 1.75mm Metal-Filled Filament for the Dreamer, Inventor Series, and Adventurer 3 (0.5kg, Copper) is: Metal percentage is 10%-20%. Metal filled density is 1.45±0.05g/cm3.

Jason	25/09/2024
[1.75 mm] There are a lot of 95a tpus available and I have tried a ton of them. Without a doubt this is the best. It's a bit more expensive than most but well worth it. 5

Riley	18/06/2024
[1.75 mm] I've printed more than 100kg of this material and shipped the 3D prints globally with zero defects, zero customer complaints, and zero returns. I only wish this would come in 8kg rolls rather than 2kg. This material also performs exceptionally when exposed to sunlight for extended periods. I've placed printed parts in direct sunlight for more than 6 months and experienced no degradation in color or flexibility. 5

Aaron	14/06/2024
[2.135 lb] This is a great product. Im new to 3D printing and this was my first TPU experience. After getting the settings dialed in it prints as easy as PLA. 5

Riley	19/05/2024
[2.135 lb] As always, NinjaTek delivers high quality consistent filament. I never have to worry about the material changing from spool to spool. I have ran around 40kg of this material with excellent results. Thanks NinjaTek! 5

Jamison	06/04/2024
[2.135 lb] I love it when it lasts a long time. I can start big prints and walk away! 5

Jane	30/11/-0001
[1.75 mm] I have printed (for work) seals for gripping soft materials as they dry, and flexible phone case and octopus, just for fun. Solid bodies with 50% infill have minimal give, though thin profiles are nicely flexible. 10% infill for flex in thicker sections. Rules for success with this: 1) Retraction OFF everywhere! 2) For Orig Prusa i3 Mk3S-max use the FLEX filament settings, change extrusion multiplier to 1.1, extruder temp to 230C, heated bed to 40C, max volumetric flow at 5 mm^3/s, no extrusion speeds above 50mm/s, fan for cooling above the 1st layer 3) Use hairspray on the bed 4) be prepared to clip stringing 5