The black Pelican 1770 Protector Long Case Blackprovides up to 54.6 x 15.6 x 8.6" of capacity and is designed to protect its contents from impacts, moisture, or dirt. Its low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads. For instances where this rolling case must be lifted off the ground, two additional rubberized handles are provided. Utilizing a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction, the Pelican 1770 Protector Long Case is MIL-STD-810G compliant. When closed, this rolling case's interior is sealed from dust, as well as water, while providing long-lasting resistance to wear-and-tear.

Each handle can be folded downward, helping to reduce the amount of space occupied by the Pelican 1770 Protector Long Case whether it is placed upright, or on its base. Four, molded cleats elevate the base, protecting it from wet and abrasive surfaces. While its lid faces upward, the rolling case's interior can be reached by opening the six latches along the lid. The base and lid are joined by four heavy-duty hinges, while the latches' double-hinged design prevents the Pelican 1770 Protector Long Case from accidentally opening due to bumps or shocks when in transit.

Both the base and lid also include a pair of shackle eyelets that align when closing the Pelican 1770 Protector Long Case. Two separately available padlocks with 1/4" diameter shackles can then be installed along the handles for enhanced security. While closed, two built-in valves automatically equalize air pressure between the interior and exterior of the rolling case. These pressure valves are water-resistant and further prevent the Pelican 1770 Protector Long Case from accidentally opening during air travel or when moving from areas of low altitude to high altitude.

Rigid Long Rolling Case    Dust, Water, and Impact Resistant    Buoyant with up to 280 lbs    3 Large Ergonomic Fold-Away Handles    Double-Hinge Latches, Padlock Compatible    2 Automatic Pressure Valves    Low-Profile Wheels    Exterior Document Container

• Rolling case with up to 54.6 x 15.6 x 8.6" of capacity that is designed to protect its contents from impacts, moisture, or dirt
• Utilizes a polypropylene, ABS plastic, EPDM rubber, and stainless-steel construction that is MIL-STD-810G compliant
• Sealed from dust as well as water, while providing long-lasting resistance to wear-and-tear
• Low-profile, built-in wheels, along with a rubberized wide-grip side handle allow for easy movement of heavy loads
• Two additional rubberized handles for instances where the rolling case must be lifted off the ground
• Handles fold away, reducing the amount of space occupied by the rolling case
• Six, double-hinged latches prevent accidental opening due to bumps or shocks when in transport
• Molded cleats elevate the rolling case's base, protecting it from surface moisture and abrasions
• Cleats interlock with molded notches along the lid of another, closed Pelican 1770 Protector Long Case, allowing multiple Pelican 1770 Protector Long Cases to be safely stacked
• Two built-in, water-resistant pressure valves further prevents the rolling case from accidentally opening during air travel or when moving from areas of low altitude to high altitude
• Maintains buoyancy while holding up to 280 lb
• Accommodates up to two separately available padlocks with 1/4" diameter shackles for enhanced security
• Included, see-through Pelican 1630DC Document Container Accessory provides a see-through identification panel that can be used to display a contents label, or owner information along the rolling case's front

Related Questions and Answers

Q: 1. Can you check this for a flight?

A: The Pelican 1745AirNF Wheeled Hard Case, Empty without Insert (Black) exterior is 46.7 x 19.4 x 8.7" / 118.6 x 49.3 x 22.1 cm. Most will take that under the plane. but you need to check with specific airline as each one is different on under the plane size rules and charges.

Q: 2. Will this fit a 17 MacBook Pro?

A: Hi,Yes it will. I have a the 15inch MacBook Pro and it fits with plenty of room. The dimensions of the padded area inside the case are 19 1/4 by 13 1/2 inches. The specs I got online for the 17 inch Mac are 10.51 x 15.47 . So you should have enough margin to pad the perimeter of you computer inside the case. Hope this helps.

Q: 3. can i get two guns in one case?

A: Depending on the dimensions of the guns, two may fit inside the Pelican 1750 Protector Wheeled Long Case. The internal dimensions of this case are 50.38 x 13.33 x 5.33".

Q: 4. Will this case work with the big Lenovo P17 Gen 1 Mobile Workstation Laptop?

A: Based on the specs I could find, your computer is 1.31" x 16.38" x 11.06 inches to it will fit in the Pelican 1495 which has interior dimensions of 18.9 x 13.1 x 3.8 inches.

Q: 5. can the foam be carved to fit a 14inch mack book pro?

A: Yes, the Pelican 1495 laptop case has pick-and-pluck foam which can be customized to fit your 14" Macbook Pro.

Q: 6. What kind of lock will fit on this case? What's the diameter of the lock hole?

A: I purchased the Ruggard 3 dial TSA combination lock and they worked fine. There are 4 spots on the opening side to secure the locks to. Not sure of the diameter of the lock hole but the Ruggard lock fit without any problems.

Q: 7. Will this hold the new MacBook Pro 16” ?

A: Yes, this has Interior Dimensions of 18.9 x 13.1 x 3.8 inches. That will be enough to hold the new MacBook Pro 16" models.

Q: 8. Would this fit 3 avenger c stands ?

A: C stands would be too long for this case. Matthews makes a case that will work for three C stands. https://bhpho.to/3aDdR8W

Q: 9. Hi,I'm located in Switzerland. I bought an article on your store. I was wondering about the VAT? how does it work?many thanks

A: Here at B&H we only collect New York sales tax for purchases made in our New York Superstore or for orders shipped to an address within New York State. Sales tax is not a VAT, and cannot be recovered by non-USA visitors when returning home.

Q: 10. Pelican 1770, Made in USA?

A: According to the information we have, our current inventory's Country of Origin is USA. Please be aware this can change over the product's production life without notice.