Anton Bauer Dionic Xt90 Gold Mount Battery

Product Code: eq58277
Availability: In Stock

$1,491.00 $2,266.32

Qty

19 reviews Write a review

Description
Reviews (19)

Use the Anton Bauer Dionic XT90 Gold Mount Batteryto power your Gold mount camera or other pro video gear. The lightweight lithium-ion chemistry can provide up to 12 amps of current on a continuous draw and support peaks of up to 20 amps for two seconds. At the side of the chassis, a backlit LCD has battery capacity information so you know when you'll have to swap out one battery for a fresh one. Using the P-Tap and USB ports, you can power essential accessories on your rig or other small electronics.

99Wh Lithium-Ion Battery Supports up to 12A Continuous Draw 20A Peak Draw for 2 Seconds >1000 Charge/Discharge Cycle Rating Backlit LCD Battery Capacity Gauge P-Tap and USB Accessory Ports

Parameters
Mount / Series Type	Gold Mount
Chemistry	Lithium-Ion
Battery Capacity	99 Wh
Output Voltage	14.4 VDC
Maximum Load	12 A
Accessory I/O	1x D-Tap / P-Tap Input 1x USB-A Input
Environmental Resistance	No
Dimensions (W x H x D)	2.17 x 5.12 x 3.82" / 55 x 130 x 97 mm
Weight	1.76 lb / 0.8 kg
Packaging Info
Package Weight	2.165 lb
Box Dimensions (LxWxH)	7.6 x 6.1 x 3.7"

Related Questions and Answers

Q: 1. How long will this battery last to power an Arri Alexa Classic EV camera?

A: This is a 99Wh battery. While it will vary depending on how you use a camera, our research tells us that a camera like that may have around an 85 watt draw. You would be looking at around an hour with a battery like this.

Q: 2. What's the estimated run time for ARRI Alexa SXT?

A: The ALEXA SXT power consumption is min. 88 W - max.141 W for camera body with EVF-1. The Anton/Bauer Dionic XT 150Wh battery would give you an estimated run time of 1hr and 30min.

Q: 3. Does this 26V LP4 have the software optimized charge and wifi integration?

A: The Anton/Bauer Dionic 26V LP4 Quad Gold Mount Plus Charger's software is optimized for charging, but the charger does not have Wi-Fi support.

Q: 4. Can this setup also work on the Sony FX9?

A: No, the Gold Mount plate won't fit on your FX9 properly. You have to use a Gold Mount plate designed for the FX9, not the FS7. Anton/Bauer makes a "Battery Slide Pro Gold Mount for Sony FX9" (BH #ANSFX9GMBSP).

Q: 5. Can I charge this battery with standard 12v battery charger or do I need 26v charger?

A: This battery needs the 26v charger. The two chargers that is compatible to charge this battery are: Dionic 26V LP4 (BH #AND26VLP4GMC) & Dionic 26V LPD (BH #AND26VLPDGMD).

Q: 6. How long will this battery power a Sony FS7 M2K?

A: Depending upon level of operation (i.e. how much zooming, other adjustments, and format of recording), you should be able to count on 3 solid hours, if not a little more.

Q: 7. Can I charge this battery with an interactive charger?

A: Yes, you can charge an Anton Bauer Dionic XT90 Gold Mount Battery with an interactive charger.

Q: 8. Can this battery be used to power a canon xf300 camera?

A: Yes, we do have a Canon BP style battery D-Tap adapter from GyroVu, so you can use the Anton Bauer Dionic XT90 V-Mount Battery for power as the Canon XF300 uses BP style batteries for power: https://bhpho.to/2FOlmLF

Q: 9. What to all the numbers mean on the LCD display? How to interpret each of them?

A: Page 8 of the user manual goes over the LCD Display. Here is a link to that manual. https://bhpho.to/2QaMTN1

Q: 10. Will this battery work safely with the ARRI Amira?

A: The power inputs on the Amira are 10.5-34 V DC for the 8pin Lemo and 10.5-24 V DC for the on-board battery interface. We recommend using any of the ARRI battery adapters and cables to properly regulate your battery's voltage. https://www.bhphotovideo.com/c/buy/battery-adapters-cables/ci/34332?gclid=EAIaIQobChMIzb3N6pj57wIVHv_jBx0XKwbKEAAYASAAEgKXEfD_BwE

Amilcar	16/09/2024
[99 Wh] The brand kind of speaks for itself. Always works and costs the same as new cheap alternatives. 5

Christine	11/09/2024
[Lithium-Ion] These are my go to batteries. They pack a punch and will power a SmallHD 702 bright for 6 hours on a steadicam. The USB outlet comes in handy for so many purposes. I can charge/power an Ambient ACN-CL Lockit on camera or power a small USB 5V portable fan for those really hot days. The Dtap lets me power a Litepanels brick on location for hours. Don't need to say much about Anton Bauer Quality and performance. If you have been in the business for a while you already know. 5

Diego	07/09/2024
[Gold Mount] It's probably been my favorite battery I've ever purchased. I have a variety of Anton Bauer batteries, and I was looking for something fairly light that could pack a punch since I do a lot of shoulder rig work. However, I also can't be swapping camera batteries too often. This is the perfect mix of elements and love how well it handles. The USB port is a nice feature as well. Highly recommended. One thing to note is I charge with the larger Anton Bauer charging dock, which seems to help track the wear and tear of the battery pretty well. I try to balance usage among all batteries when possible. My primary camera set-up is a Sony FS7, with an expansion pack, and I will sometimes power an external recorder, either an Odyssey 7Q+ or a Shogun Atomos, with this battery. 5

Zayd	04/09/2024
[12 A] See Title 5

Zayd	04/09/2024
[12 A] See Title 5

Jeffrey	03/09/2024
[Gold Mount] Have owned many types of Dionic HC gold mount batts and these are the best size/ shape/ wattage combo for any price... for use on cinema cameras including all Alexa, all Red, all Sony Cameras. P tap and USB ports are useful as is light up display. 150 watt in this shape is the perfect size. Also use them to power 12v light panels with gold mount plates. Highly recommend 5

Curtis	02/09/2024
[12 A] Anton Bauer batteries and accessories have not failed me yet, but there's a fairly steep up-front cost to pay. This plate is plastic. It's decent plastic, but for the price, I was a little surprised that it wasn't something a little more robust. In any case, it works well attached to my Zacuto Zwiss plate v.2 and powers my rig through an entire production day without issue with the Digital 150 AB battery. 5

Marc	24/08/2024
[2.165 lb] We have racks of these chargers and love them. They charge 14.4 & 26V so they are a no-brainer for our clients. 5

Robert	22/08/2024
[12 A] I used these power D-Tap mounts on many occasions, on my camera, steadicam even my Jimmy Jib. Very reliable and love the D-tap outlet. Nothing negative to say about it! 5