The white Wireless Mic Belts for Lectrosonics SMQV Transmitteris a custom holder designed to fit Lectrosonics SMQV and Shure UR1M wireless bodypack transmitter models. It is used to conceal or camouflage your wireless bodypack transmitter for stage and screen purposes. The holder is constructed of latex-free, fabric-covered Dri-Prene, a high-performance TPE foam which makes it durable, moisture resistant, machine washable, and fast drying. The CleanSport NXT exterior treatment breaks down sweat and controls odors.

It features a bidirectional belt loop to allow comfortable horizontal or vertical orientation on a shoulder harness or belt. The holder includes touch-fastener closures for securing the microphone connections and antenna. It ships with one WMB Label and a Cable Disc for convenient labeling and cable management.

For Lectrosonics SMQV Transmitters    Wear in Vertical or Horizontal Position    Dri-Prene TPE Foam Covered in Fabric    Exterior Treated with CleanSport NXT    Durable, Moisture-Resistant & Latex-Free    Machine Washable & Fast Drying    Bidirectional Belt Loop    Touch-Fastener Closure    Comfortable to Wear    Includes WMB Label & Cable Disc

Fabric-covered, high-performance Dri-Prene TPE foam offers the softness and elasticity of rubber while being a recyclable material

Durable, moisture-resistant, latex-free, machine washable, and fast drying

Exterior is treated with CleanSport NXT, a natural odor control agent bonded to the fabric surface that breaks down sweat and organic material

Bidirectional belt loop allows your wireless unit to be positioned horizontally or vertically on a belt or shoulder harness

Touch fastener closures secure the antenna and microphone connectors in place while protecting equipment from moisture and minor handling abuse

Included WMB label and cable disc accessories are writable with permanent marker and can be used to secure small cables for performance or storage needs

Related Questions and Answers

Q: 1. What is the width of the elastic?

A: The width of the elastic is 2 inches.

Q: 2. Would this work to give a little extra room if the belt I have fits a little too tight on the body? Or would it barely make a difference?

A: This belt is 7 inches long, so it could possibly be used to extend a belt. It 's main purpose is to strap a wireless bodypack onto a guitar strap or mic stand.

Q: 3. Can I create a flexlist with this transmitter and the m2r?

A: Yes. On page 12 of Operators Manual it is described: Selecting M2R Receiver Functions The M2R Receiver includes a FlexList™ mode where up to 16 mixes can be accessed by name. This feature enables a user to quickly find and listen to any of the performer’s mixes on the stage. The mix includes the name, frequency, mixer settings and limiter settings. The mix is easily shared via the M2R IR port, added to the list of 16 mixes and stored until cleared by the user. The M2R allows the user to toggle between the mixes, making troubleshooting issues easy and efficient. Flex Sync DCHT, DCHT/E01 information to the M2R FlexList either as one stereo Channel or individual channels: - SendTx: Send (sync) all receiver information to the M2R FlexList as one stereo channel - SendCh1: Send (sync) Channel 1 unique information to the M2R FlexList - SendCh2: Send (sync) Channel 2 unique information to the M2R FlexList - SendM12: Send (sync) a mono mix of both channels to the M2R FlexList Use th

Q: 4. Can you use this with a SRa receiver

A: So long as your SRa receiver has the same frequency ranges as the LMb transmitter, the LMb transmitter will work with an SRa receiver.

Q: 5. Does this Transmitter have IFB mode to use as an IFB Transmitter?

A: Yes, the Lectrosonics L Series LT Bodypack Wireless Transmitter does have an IFB mode option in the compatibility settings.

Q: 6. It is possible to combine a Lectrosonics L-Series LMb (B1: 537 to 614 MHz) with a UCR 411A?

A: Yes, the LMb transmitter can be used with all Lectrosonics Digital Hybrid Wireless receivers including the UCR411a when the compatibility mode for the transmitter and receiver are both set to the "Nu Hybrid" compatibility mode. Lectrosonics notes that if your receiver does not have Nu Hybrid mode, then set the receiver to the "Euro Digital Hybrid Wireless" compatibility mode.

Q: 7. Does the transmitter come with a belt clip included?

A: The Lectrosonics LMb Digital Hybrid Wireless Beltpack Transmitter does come with a metal belt clip.

Q: 8. Is there a battery eliminator made for this?

A: No,at this time there are no battery eliminators or alternate powering options available for the LMb transmitter.

Q: 9. Can the Velcro be velcroed to anywhere along the length of the belt? Can the belts be cut shorter?

A: Unfortunately the entire belt is not Velcro. Each belt comes with 4" (10.16cm) hook-and-loop closures and is available in fitted sizes that stretch up to 4 additional inches to provide a comfortable, secure fit. This set can cover most cast sizes for professional productions. The package includes 3 extra small, 5 small, 5 medium, 4 large, and 3 extra large belts. With the variety of sizes I don't think you would need to cut the belt.

Q: 10. What recivers are available to use with this transmitter?

A: The list of receivers compatible with the Lectrosonics HMa Plug-On Wireless Transmitter depends on the frequency range selected. For an HMa on the A1 (470-537MHz) or B1 (537-607MHz) ranges, there are many options including the Lectrosonics SRc, LR, UCR411A. If using the HMa on the 941 (941-951MHz), the options are limited to the SRc receiver.