With Starlight Xpress USB Filter Wheel 1.25" Eyepiece Threadsyou can change the size and type of filter you use in your filter wheel, without having to get a second complete wheel system. This carousel accepts up to seven standard 1.25" eyepiece filters for capturing planets, nebulae, and other celestial objects in targeted wavelengths.

Accepts 1.25" Eyepiece Filters    Load up to 7 Individual Filters

Related Questions and Answers

Q: 1. Dear i heave telescope skywatcher p250 quattro-10 and iready pay this eyepiece but it is not clear i dont now whay???

A: Dear Qassem, Please contact our Technical Support Department, so a representative can speak to you and help to troubleshoot the issue which could be caused by a variety of different reasons such as optics in need of collimation, scope needing cool down, etc. You can reach our Technical Support Department by submitting a ticket at: https://www.celestron.com/pages/technical-support Sincerely, Garrett at Celestron

Q: 2. What is the thread diameter and TPI or Pitch under the rubber eyecup?

A: That information is not published by Celestron

Q: 3. Is this eyepiece threaded at 42mm on the top to attach cameras like the XW eyepieces are?

A: The Pentax SMC 8-24mm Zoom Eyepiece (1.25") BH #PEEP2060X • MFR #70509 does no have any threads for additional add on.

Q: 4. Does this zoom attach directly to a t-ring?

A: No it does not. It slides into a 1.25" eyepiece sleeve of a telescope.

Q: 5. Does it work with celestron 127 slt ?

A: Yes the Celestron 8-24mm Zoom Eyepiece (1.25") is compatible with the Celestron 127SLT telescope.

Q: 6. I have 130 eq ...can i used zoom lens

A: As long as you have 1.25 mount hole on your telescope (I believe 130eq is 1.25 ), you can use this one. I have 127eq and I absolutely love this eyepiece!

Q: 7. I have a Celestron TrailSeeker 80 spotting scope. It came with its own 8-24 zoom eyepiece. It's fine. But would this different 8-24 eyepiece be an upgrade? Is the quality higher? If so, great. If not, I'll stick with the original.

A: The Celestron 8-24mm Zoom Eyepiece (1.25") BH #CEEPZ824 • MFR #93230 is the same eyepiece that comes with the Celestron TrailSeeker 80 20-60x80 Spotting Scope.

Q: 8. i have a range of spotting scopes and have just bought a televue 85 scope i want to see the birds clearly that my 82 leica 65 leica and 65 vanguard can't at long range so this eyepiece only gives me the same as them am i correct in that ?

A: Well it depends on the Focal Length of your scope. That is what determines the power of this eyepiece technically. You take the Focal Length of your Scope and divide it by the Millimeter of the Eyepiece.

Q: 9. Some reviewers say, if you get this eyepiece with PF-65EDA, it doesn't fit into the provided case for the scope. Is that right?

A: The case included with the Pentax PF-65EDAII 65mm Spotting Scope was designed to be used with the open back or fully closed depending on the size of the eyepiece attach to the scope. You would not be able to fully closed the bag when attaching Pentax SMC 8-24mm Zoom Eyepiece. The lenght of the case on the outer curve is 16.5''. The case has 2 zippers, 1 will give you access to the tripod mount. The second one will allow access to mount your eyepiece.

Q: 10. will this product be compatible with the NexStar 8se?

A: Have a look at your eyepieces: there should be an internal thread on the end that goes into the telescope focusser. If so the Celestron eyepiece filters will fit, in fact they will screw into most brands of 1.25 eyepieces. However, they will not fit any 2 or the older 0.965 eyepieces. Kind Regards, Ian