The white Wireless Mic Belts for Sennheiser G4 & G3 Transmitter - Whiteis a custom holder designed to fit Sennheiser G4 and G3 wireless bodypack transmitter models. It is used to conceal or camouflage your wireless bodypack transmitter for stage and screen purposes. The holder is constructed of latex-free, fabric-covered Dri-Prene, a high-performance TPE foam which makes it durable, moisture resistant, machine washable, and fast drying. The CleanSport NXT exterior treatment breaks down sweat and controls odors.

It features a bidirectional belt loop to allow comfortable horizontal or vertical orientation on a shoulder harness or belt. The holder includes touch-fastener closures for securing the microphone connections and antenna. It ships with one WMB Label and a Cable Disc for convenient labeling and cable management.

For Sennheiser G4 & G3 Transmitters    Wear in Vertical or Horizontal Position    Dri-Prene TPE Foam Covered in Fabric    Exterior Treated with CleanSport NXT    Durable, Moisture-Resistant & Latex-Free    Machine Washable & Fast Drying    Bidirectional Belt Loop    Touch-Fastener Closure    Comfortable to Wear    Includes WMB Label & Cable Disc

Fabric-covered, high-performance Dri-Prene TPE foam offers the softness and elasticity of rubber while being a recyclable material

Durable, moisture-resistant, latex-free, machine washable, and fast drying

Exterior is treated with CleanSport NXT, a natural odor control agent bonded to the fabric surface that breaks down sweat and organic material

Bidirectional belt loop allows your wireless unit to be positioned horizontally or vertically on a belt or shoulder harness

Touch fastener closures secure the antenna and microphone connectors in place while protecting equipment from moisture and minor handling abuse

Included WMB label and cable disc accessories are writable with permanent marker and can be used to secure small cables for performance or storage needs

Related Questions and Answers

Q: 1. I own one but the spring in back of it broke, Can I get a replacement ??

A: BH #SE543660 is the appropriate replacement belt clip for the Sennheiser SK 100 G4 Wireless Bodypack Transmitter.

Q: 2. Will the Sennheiser 100 4. Work with my older Sennheiser receivers? I have eg 100 and an eg 100 2. Currently having issues with both transmitters. One comes on and will not work. The other one works great while on. As soon as we turn the transmitter off, our soundsystem makes a horrible sound and I have to mute the whole system. This happened today at the end of our church service during alter call. The worse time possible for it to start popping and crackling at top volumes. It may be interference, I don’t know. But it has to be fixed. Your help would be appreciated James

A: Sennheiser's G4 series components are backwards compatible for use with the older Sennheiser G1, G2 and G3 series components. Be sure to select G4 components on the same frequency band as your older components for compatibility. Regarding the noise, you may be able to resolve the issue with popping and crackling noises when you switch off the transmitter by adjusting the squelch threshold setting on the receiver. It may be set too low or may be turned off. Squelch eliminates the noise that occurs when the transmitter is switched off and also suppresses sudden noise when the receiver is no longer receiving sufficient signal from transmitter. With the transmitter switched off, try adjusting the squelch threshold on the receiver between 5 to 20 dB (start at 5 dB first and increase it only if needed). Use the lowest possible setting that suppresses the unwanted noise. I hope this information helps! Please feel free to contact us if you have any questions or would like further assistance.

Q: 3. Will this mount one Sennheiser EW100G3 Receiver in a rack with the receiver's antennas mounted on the front of the rack next to the receiver?

A: Yes the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers will hold one or two receivers.

Q: 4. Will this work with the Sennheiser EK 100 G4 Camera-Mount Wireless Receiver? Or is it only compatible with the EM 100?

A: Yes, the Sennheiser SK 100 G4 Wireless Bodypack Transmitter (A1: 470 to 516 MHz) would work with the Sennheiser EK 100 G4 Camera-Mount Wireless Receiver. Just make sure that the frequency range of the transmitter matches that of the receiver.

Q: 5. Can you interchange the microphone capsule from a Sennheiser ew 100 G3 microphone to this one?

A: Hi Louis - the microphone capsules for Evolution Wireless G3 and G4 are interchangeable and 100% compatible with each other. While EW G2 and EW G1 used a capsule system that was based on a cartridge design, the capsules for G3 and G4 are quickly & easily swapped by unscrewing them from the transmitter where the body meets the metal mesh of the microphone grille.

Q: 6. Can the Sennheiser GA 3 accomodate two receivers _AND_ mount both antennas from both receivers on the front?

A: Yes, the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers can hold one or two receivers with antennas attached to the receivers.

Q: 7. Can the Sennheiser SK 100 G4 transmit to multiple 100 g4 receiverers on the same frequency. one transmitter to 2 - receivers?

A: Yes, the Sennheiser SK 100 G4 Wireless Bodypack Transmitter can simultaneously transmit audio to multiple EW 100 G4 Series Wireless Receivers that are tuned to the same frequency.

Q: 8. Will this one kit rack two of my wireless receivers?

A: The GA3 kit includes a joining plate that will allow you to mount 2 receivers side by side in a single rack space.

Q: 9. Can the g4 handheld transmitter work with the G3 receiver?

A: Yes, Sennheiser G4 systems are compatible with G3 systems.

Q: 10. I'm looking for a belt clip for Sennheiser SK100 ?

A: BH #SE543660 is the replacement belt clip for the Sennheiser SK 100 G4 Wireless Bodypack Transmitter.