The 3' Blizzard Cool Cable PowerCON DMX 3-Pin Combo 3'is a power/DMX combination cable designed to replace separate power and DMX cables for system installers, A/V technicians, and lighting designers in clubs, houses of worship, and live stage applications. It improves cable management by enclosing the power and DMX cables in a pliable outer jacket with heat shrink for the tidy, consolidated appearance of a single cable.

The heavy-duty 14 AWG power cable is terminated with color-coded, powerCON-compatible connectors. The low-capacitance, double-shielded DMX cable is terminated with XLR 3-pin jacks. Touch fastener straps are included for maintaining an orderly coil when storing or transporting the cable.

Replace Separate Power & DMX Cables    Improves Cable Management    Heavy-Duty 14 AWG Power Cable    Low-Capacitance DMX Cable    Color-Coded powerCON Connectors    XLR 3-Pin Female Input    XLR 3-Pin Male Output    Flexible Outer Jacket with Heat Shrink    Includes Dual Touch Fastener Straps

Make your lighting setup simpler and cleaner by replacing separate power and DMX cables with this Cool Cable powerCON and DMX combo cable.

The power cable features heavy-duty 14 AWG wire and is fitted with powerCON-compatible input (blue) and output (white) connectors.

The DMX cable is wrapped five times tighter than traditional XLRs and features 120-Ohm impedance, low capacitance, a double (foil and braid) shield, and an XLR 3-pin connector on each end.

Power and DMX cables are encased together in a highly flexible outer jacket with heat-shrink

Use the included touch fastener straps to keep the cables neatly coiled when not in use.

Related Questions and Answers

Q: 1. Is this made out of SJOOW cable?

A: The manufactuer does not list this as a SJOOW cable but they do give the following details: Blizzard PCON-MAIN-1425 is powerCON® compatible to Edison main power cable Heavy duty 14AWG (Edison-out 12 AWG), 14 Gage 3 conductor cord with 3-conductor locking plugs. It has a cable gauge of 14 AWG with a maximum amperage rating of 15 amps.

Q: 2. will these work as power cords for EV SxA360 powered speakers?

A: Yes, this pc main power cable will work to power the following speakers.

Q: 3. Will this power the Aputure 300x?

A: No, the Blizzard COOL CABLE PCT Interconnect Edison M Cable (10') is not compatible.

Q: 4. All the promo pictures show it in use without power plugged in. Doesn't it need a power source which is why it includes adapter?

A: The Blizzard wiCICLE Skywire Wireless DMX Receiver (B&H# BLWICICLESKY) can use the included AC adapter for power, yes, but it can alternatively draw power from wiCICLE Enabled fixtures and other so-labeled equipment.

Q: 5. Will this cable work with the Aputure Light Storm LS C120D II LED Light Kit ?

A: Yes, this Blizzard 14 AWG Edison M Cable can work with an Aputure LS C120D II.

Q: 6. Is this compatible with Aputure 300d lights?

A: No, the Blizzard Cool Cable Grounded Male Edison-14 Gauge Mains Power Cable (10') is not compatible on the Aputure 300d lights, The best cable is the one by Aputure. And that is only available direct from them.

Q: 7. Is this compitable with the Astera AX5 triple par fixture?

A: Yes the Blizzard Cool Cable Grounded Male Edison-14 Gauge Mains Power Cable (10') fits the Astera AX5 TriplePAR light.

Q: 8. Could I use 100-200 of these receivers with one transmitter?

A: Being that one universe of DMX is comprised of 512 channels, you could use that amount of receivers. However, this would also be dependent on the fixtures you're connecting, where one fixture can take up multiple channels to control color, motion or dimming.

Q: 9. Will this receiver communicate with the Exalux Control One?

A: The Blizzard wiCICLE Skywire Wireless DMX Receiver is not compatible with the Exalux CONTROL ONE DMX Controller. The Exalux CONTROL ONE DMX Controller is LumenRadio CRMX. So you need one like this, https://bhpho.to/3Mbq2Ny.

Q: 10. Is this 3 or 5 pin?

A: It has a three pin.