This 3' Remote Audio Starquad XLR Male to Female Cableuses Canare StarQuad cable which provides greater rejection of electromagnetic noise. The quad design is effective in reducing induced noise from dimmer packs, fluorescent light ballasts, and AC transformers by as much as 30dB over standard mic cables.

Canare StarQuad with Neutrik connectors

Related Questions and Answers

Q: 1. are all five wires connected end to end?

A: Yes all 5 pins are connected end to end. We use ours for extension headset cable and it works great.

Q: 2. I plan to use this for a mid-side array - assuming this is wired like the Rycote Conbox? I’ll be running a 5 pin XLR from the male to the mixer. Thanks.

A: This is the recommended cable for the Rycote Conn Box: BH #RYCB3HWMSXLR https://www.bhphotovideo.com/c/product/861410-REG/Rycote_016924_ConnBox_Microphone_Cable.html

Q: 3. Is it really 30' long? This type of snake is sold in other websites in other lengths but never seen one that is 30' long

A: Yes, the Mogami GOLD 8 XLR-XLR-30 8-Channel XLR Male to XLR Female Audio Snake Cable is 30' long. It is also available in 75' (B&H # MOG8XLRXLR30) and 100' (B&H # MOS8XM8XF100) lengths.

Q: 4. Does this cable work with the Arri Amira?

A: Yes it will work.

Q: 5. Is the length the length of the core or does it include the fanout ends?

A: The length specification for the Sescom 8-Channel XLR Male to XLR Female Audio Snake Cable (10'), BH # SE8XM8XF10, is an inclusive end -to-end measurement.

Q: 6. Does it pass phantom power? Thanks

A: Yes it does

Q: 7. Will this also work with the schoeps cable https://www.bhphotovideo.com/c/product/1513008-REG/schoeps_ak_2l_su_adapter_cable_2_lemo_to.html ?

A: The Schoeps AK 2L/SU Adapter Cable with two LEMO connectors and an XLR-5M is intended for use with a pair of Schoeps CCM-L Microphones which are equipped with LEMO output connectors. The Remote Audio CAXSTE 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable can be used with the Schoeps cable to enable connection of the pair of microphones to two standard XLR 3-pin mic inputs.

Q: 8. Will this cable work in Lark Max transmitter? I'm using rode NTG4+ SHOTGUN MICROPHONE

A: No, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable is not compatible for use with the Hollyland LARK MAX wireless transmitter. The cable has a locking 3.5mm TRS connector and the transmitter uses a non-locking connector. As a better option, try the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable - 3' (B&H # KOXRSM03B) or any similar cable with a non-locking 3.5mm connector.

Q: 9. I am looking to use my xlr lavs and stick mics with a dji wireless mic rig. Will this adaptor allow me to do this? Thanks!

A: No, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable is not compatible for use with the transmitters for the DJI Mic 2-Person Compact Digital Wireless Microphone System/Recorder since they use a non-locking input connector. As a compatible option, you can use the Kopul LMT100 - Low to High Impedance Matching Transformer - 1.5' (B&H # KOLMT100) which will work for dynamic microphones that do not require any voltage to function and condenser mics that require up to approximately 5V.

Q: 10. Are the input angles adjustable at the connectors?

A: No, the connectors on the Remote Audio 3-Pin XLR Right Angle Male to 3-Pin XLR Right Angle Female Coiled Jumper Cable are not adjustable. They are fixed at 90 degrees.