The Tiffen 4x5.65" Green Soft-Edge Graduated Filterhelps to specifically add a bright green coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 5 color density provides more green coloration than the 4 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 4 x 5.65" / 101.6 x 143.5mm.

Note: A horizontal orientation filter's line of transition runs parallel to the long side of the filter.

5 Density Color Graduated Filter    Green Coloring in Select Areas    Soft-Step Graduation    ColorCore Technology

Provides a bright green coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. What is the length of the stand?

A: Approximately 30-32 inches

Q: 2. Is the back of the unit made from plastic or metal?

A: The back is made of plastic.

Q: 3. Will this stretch some to fit on flashlight with 42mm bezel?

A: The Nitecore Blue Filter for 40mm Flashlight will not fit a 42mm bezel.

Q: 4. What is the weight of the light? Will the Studio 18" (STLS301) table top support it?

A: This GVM LED Light Bi-Color Edge Video LED Soft Light weighs 5.95 lbs, so the Studio Essentials Tabletop Light Stand (18"), BH #STLS30 cannot hold it.

Q: 5. Does this matte box come with one or two filter frames?

A: this is for one 4" x 4" / 4.5" round filter frame and one 4" x 5.65" / 4" x 4" frame. Rear stage fully rotatable.

Q: 6. Does this filter have a Wratten number equivalent?

A: We offer the opinion that the P Series Green 0.8 Filter (2.6 Stop) has a green (not including the ND) of about a Wratten #58.

Q: 7. Can this attach to a standard light stand vs. just clamped to a table or desk?

A: You can detach the table top stand and use a standard light stand.

Q: 8. can this be set as a flash?

A: NO

Q: 9. Could you please advise if theNITECORE Red Filter for 34mm Flashlight can be used for scuba diving up to 40m? Thank you.

A: The NITECORE Red Filter for 34mm Flashlight is not designed for scuba diving. If you do need a red filter on a dive light than has a 34mm bezel it will work. For recommendations on dive lights that include a filter or have a red beam please email uw@bhphoto.com.

Q: 10. Can you tell me exactly what model # flashlights these filters along with the other colors and defusers fits as I want to get a flashlight that works with this type filter & defuser one that has the rubber type housing & lanyard hole. Will they work with the XML-T6 or UltraFire C8 ?

A: You will need to check the head diameter of these flashlights. It needs to be 1.6 (4.0 cm) at the head diameter to work with these filters. Many of the better known flashlights - Surefire, Nitecore, EagleTec, Fenix, etc have standard head diameter sizes of there high-end tactical lights. I'm not familiar with UltraFire. XML-T6 is a Cree LED type and comes in many flashlight brands. Check for the actual flashlight model and then check for the head diameter. On a quick web search for the UltraFire C8 it looks like the head diameter is 45mm. Not a standard filter size and so the filter above will not work. But check the specs before a final decision. The 40mm filters also come in red, blue, sometimes yellow (rare) and a white light diffuser. You might also check the flashlight manufacturers site for models of their filters - they may be custom.