Ideal for high-density server and data center environments, this 10' long C2G RJ45 Male to Male Slim Cat 6 Patch Cable 10' Blackfrom C2G RJ45 Male to Male Slim Cat 6 Patch Cable 10' Blackfeatures 28 AWG conductors for a small diameter. The slim size and small bend radius allow you to more easily route cable through smaller spaces while still enjoying improved airflow. Snagless RJ45 connectors help to reduce frustration, wasted time, and connector strain when running cable.

10' in Length    Slim Size for High-Density Cable Runs    28 AWG Gauge with Snagless Connectors    Up to 10 Gb/s Transfer Speeds    Meets ANSI/TIA-568-C.2 Standard    Copper Material to Minimize NEXT Levels

Supporting the Cat 6 standard, this cable is well suited for bandwidth-intensive applications, such as voice, data, or video. It provides support for throughput speeds of up to 10 Gb/s.

Due to the 28 AWB size, signal attenuation is increased to limit the distance of installations. There are also bundle limits based on heat dissipation.

315' / 96 m channel: up to 19.7' of slim cable with 295.3' of horizontal cable
305' / 93 m channel: up to 32.8' of slim cable with 272.3' of horizontal cable
POE/POE+: bundle limit of 40 cables due to heat dissipation

Meets the ANSI/TIA-568-C.2 standard
Copper construction to minimize NEXT (Near-End Crosstalk) levels

Related Questions and Answers

Q: 1. Is this cable compatible with Apple earphones?

A: This will work fine with Apple earbuds and most headphones for audio listening, but will not carry the signal for the control or microphone features.

Q: 2. What version HDMI is this? I currently record externally to the Atomos Ninja V and need 2.1 connection. Does it matter?

A: This lists support for up to 4K60, which means it has to be at least HDMI 2.0.

Q: 3. Is this compatible with Nikon Z5/Z6 camera?

A: Yes, this is compatible with both Nikon Z5 and Z6.

Q: 4. will this handle prores raw into ninja v?

A: For a RAW signal we highly recommend a direct connection. We are not aware of this being able to pass a RAW signal.

Q: 5. Is it used to connect sony a7iii to thunderbolt 3 port?

A: This is the correct cable for a Sony A7 R III.

Q: 6. Hey, I have the Azden SMX-10. I was wondering if this would be a solution to use instead of getting the trrs- trs adapter? I would like to use my SMX and lavaliere mics on my iPhone and IPad so I don't have to get a separate recording device just yet. Thank you

A: This cable is an extension and only and will connect properly to an iPhone or iPad. It may be used in conjunction with a TRRS adapter. Rode SC6 Dual TRRS Input and Headphone Output for Smartphones B&H # ROSC6

Q: 7. Is the description here accurate that the USB-C to USB-C 3' cable only transfers at 5 Gbps? I checked the TetherPro site and it says 3 / 0.9m USB 3.1 Gen 2, 10 Gbps, 3A whereas the longer cables do have a 5 Gbps transfer rate.

A: When the cable gets longer than the USB specification for USB-C, the data transfer speeds will slow down. The 3' cable will achieve 10 Gbps. The longer cables will decrease in speeds depending on length and hardware used.

Q: 8. will this work with Hasselblad H6D100? is the 90 degree connector long enough to fit into the recessed USB-C port?

A: ThetherTools only lists the straight plugs as compatible.

Q: 9. Is this capable of recording sound from a mic into a sound recorder?

A: This is a 3.5mm extension cable, if you have a microphone and recorder with a 3.5mm connection you can use this to extend the cable from the mic to the recorder.

Q: 10. Will this fit in the very tight confines of the FS7 HDMI slot?

A: Yes, the SmallRig Ultra-Slim Female HDMI Type A to Male HDMI Type A Adapter Cable will work with the FS7's HDMI port.