The brown, 90mm DPA Microphones d:fine Core 4166 Omnidirectional Mic Boomfrom DPA Microphones d:fine Core 4166 Omnidirectional Mic Boomis a replacement microphone boom for the d:fine headset (sold separately). Designed for theater and broadcast applications, the Core 4166 amplifier technology delivers a 14 dB increase in both THD (total harmonic distortion) and dynamic range than the Legacy 4166 model. This miniature mic boom requires an optional cable and earset.

Replacement Mic Boom for d:fine Headsets    Omnidirectional Polar Pattern    For Stage and Television    Core Amplifier Increases Performance    14 dB Increase in THD and Dynamic Range    20 Hz to 20 kHz Frequency Range    Requires Cable and Earset

Pristine audio quality

Lightweight and flexible

Easy mounting

Minimal visual impact

Resistant to humidity

Flexible adapter system fits most professional wireless systems

Related Questions and Answers

Q: 1. can you plug in wired buds?

A: Yes. The Tula Mic has a standard 3.5mm TRS headphone jack that can be used with most types of wired headphones and earbuds.

Q: 2. why does the arm want to spring to the ceiling, is my mic not heavy enough?

A: That generatlly happens if the mic is not heavy enough.

Q: 3. How many windscreens are included in one package?

A: The Earthworks OMW3 Windscreen for Earthworks Omnidirectional Microphones contains one Earthworks OMW3 Windscreen.

Q: 4. Would this work with Rode VideoMic NTG Hybrid Analog/USB Camera-Mount Shotgun Microphone, or will it want to jump to the sky?

A: Yes it will.

Q: 5. Can this mic be rigged on-camera?

A: Any shotgun can be rigged on camera: Here are a few things to keep in mind: 1) You will need XLR input with phantom poer. If your camera only sports a mini input, you will need some sort of an XLR adapter device such as a beachtek adapter "with phantom power) to allow the use of this mic. 2) If this is going onto a smaller form factor camera and especially if you are using a wider angle lens, this mic may be in the frame, so this may not be your best choice then and you may want to opt for a shorter microphone. 3) Shotgun mics are very sensitive to handling noise, so make sure you get a shockmount to go with this mic in order to minimize handling noise.

Q: 6. does it work with a razer siren x?

A: Yes, the Rode PSA1 Studio Boom Arm for Broadcast Microphones will work to mount the Razer Seiren X Gaming Microphone via the 5/8"-27 mounting adapter on both units.

Q: 7. Which 48V phantom power is recommended to work with this mic?

A: Flexible Operating Voltage: 24 to 48 V phantom power.

Q: 8. Can you flip one of the screws so that one screws "up" and the other screws "down" or are they both locked in that position?

A: Yes, the threaded bushings on the bottom of the Gator Frameworks Mic Mount Bar can be removed with a flathead screwdriver so you can position the screws as needed.

Q: 9. Will it work with rode nt-usb mini?

A: Yes. This arm witll hold the NT-USB Mini.

Q: 10. Does anyone use a pop filter with this arm? If so how do you attach?

A: You can clamp it onto the boom arm. So the pop screen will move with the mic. This is a good one made by K&M. B&H # KM23956B you can find it on our website.