The brown, 90mm DPA Microphones d:fine Core 4266 Omnidirectional Miniature Mic Boomfrom DPA Microphones d:fine Core 4266 Omnidirectional Miniature Mic Boomis a replacement microphone boom for the d:fine headset (sold separately). Designed for theater and broadcast applications, the Core 4266 amplifier technology delivers a 14 dB increase in both THD (total harmonic distortion) and dynamic range than the Legacy 4266 model. This miniature mic boom requires an optional cable and headset.

Replacement Mic Boom for d:fine Headsets    Omnidirectional Polar Pattern    For Stage and Television    Core Amplifier Increases Performance    14 dB Increase in THD and Dynamic Range    20 Hz to 20 kHz Frequency Range    Requires Cable and Headset

Pristine audio quality

Lightweight and flexible

Minimal visual impact

Resistant to humidity

Flexible adapter system fits most professional wireless systems

Related Questions and Answers

Q: 1. Will the device it pass supplied 48 V phantom power through to a microphone on the input?

A: The Cloudlifter Z Instrument/Mic Activator is not compatible with condenser microphones. The Cloudlifter itself does not pass phantom power, rather, it is powered by phantom power, and uses that to boost the output level of the connected mic or instrument. For condenser microphones that require phantom power, this is the most similar in-line preamp to use: https://bhpho.to/3jLSjQX

Q: 2. why does the arm want to spring to the ceiling, is my mic not heavy enough?

A: That generatlly happens if the mic is not heavy enough.

Q: 3. Can this mic be rigged on-camera?

A: Any shotgun can be rigged on camera: Here are a few things to keep in mind: 1) You will need XLR input with phantom poer. If your camera only sports a mini input, you will need some sort of an XLR adapter device such as a beachtek adapter "with phantom power) to allow the use of this mic. 2) If this is going onto a smaller form factor camera and especially if you are using a wider angle lens, this mic may be in the frame, so this may not be your best choice then and you may want to opt for a shorter microphone. 3) Shotgun mics are very sensitive to handling noise, so make sure you get a shockmount to go with this mic in order to minimize handling noise.

Q: 4. Would this work with Rode VideoMic NTG Hybrid Analog/USB Camera-Mount Shotgun Microphone, or will it want to jump to the sky?

A: Yes it will.

Q: 5. I am reaching out regarding this boom arm. Does this product fit the SM6 shock mount?

A: Yes. This will fit any standard mic clip or shock mount.

Q: 6. How many windscreens are included in one package?

A: The Earthworks OMW3 Windscreen for Earthworks Omnidirectional Microphones contains one Earthworks OMW3 Windscreen.

Q: 7. Does anyone use a pop filter with this arm? If so how do you attach?

A: You can clamp it onto the boom arm. So the pop screen will move with the mic. This is a good one made by K&M. B&H # KM23956B you can find it on our website.

Q: 8. Is the 4-pin Hirose connector the same as a Sony 4-pin connector, for example on the DWT-B01 transmitter?

A: Yes, this mic is compatible with that Sony transmitter. It's pretty decent, too!

Q: 9. Does it work with AT2020USB+?

A: Yes, fully compatible.

Q: 10. Will it work with rode nt-usb mini?

A: Yes. This arm witll hold the NT-USB Mini.