Designed for television studios and theaters, the Zylight Pro-Palette 350W Asymmetric Color LED Cyclorama Light is a powerful yet energy-efficient fixture that produces a soft, even field of asymmetrical light. The fixture can change colors smoothly through DMX controls in a choice of RGBW (for a backdrop of multicolor mixes), or pure white light for a clean chroma key wash. The intuitive onboard control panel allows for the creation of millions of colors without gels or filters. Up to four Pro-Palette fixtures can be daisy-chained side by side to provide greater saturation of light. The Pro-Palette Color LED Cyclorama Light ships with a power cord.

Designed for TV Studios and Theaters    Light Source: 128 x CREE LEDs (RGBW)    Beam Angle: 54 x 80°, Fixed Angle    Usable Distance: 4.9 to 8.2'    Modes: RGBW, HSI, CCT, Effects    DMX Channels: 4, 3, 2    Daisy Chain: 4 Fixtures    powerCON I/O    DMX Connectors: 5-Pin XLR I/O    Includes Power Cord

• RGBW (red, green, blue, white) LEDs
• Maximum output of 350W
• Smooth dimming: 0 to 100%, flicker-free
• Dual auto-cooling fans
• 100 to 240 VAC international power input
• DMX-512 and RDM-ready
• Lightweight aluminum and rigid steel housing
• Built for floor use or truss mount
• Daisy-chain up to four fixtures side-by-side for greater saturation

Related Questions and Answers

Q: 1. What is the ouput comparison to hmi or tungsten? I dont see a foot candle chart. Also how long will a 150wh battery last at full power on this fixture?

A: According to Zylight, the F8-D has the light output just below a 1000 watt tungsten fresnel and the light output equivalent to 200 watts of HMI. For the complete photometrics on this fresnel, please see the following link: http://bit.ly/1Thzcq3. As for how long a 150Wh battery would last on this light, you would get about 1.5 hours of life at full power.

Q: 2. Whats the lux?

A: Lux information is not supplied by the manufacturer, however there is information on the footcandle on the second page of this spec sheet made by the manufacturer: https://www.ushio.com/files/specifications/zylight-newz-led-camera-top-light.pdf

Q: 3. This comes with an AC adapter and cord correct? How long is the cord?

A: Hi Scott, The Newz LED Light comes standard with Barn Doors and an attached D-Tap cable for powering. The Worldwide AC Adapter is an accessory which can be found here: https://www.bhphotovideo.com/c/product/1171633-REG/zylight_26_02032_worldwide_ac_power_supply.html The AC power cord on that AC supply is 6' long and the DC connection is 6' for a total of 12' of extension. This AC adapter is recommend when using the Newz as a backlight or small kick light on a stand.

Q: 4. does it fit in a wind-up stand and can i mount a ball hed on this thread ?

A: Yes, the following will adapt to a windup stand and the top thread cam be used to attach a camera.

Q: 5. someone hast the first generation of this light? Do the 200 has the double of the power?

A: The F8 200w has double the power of the F8 100w.

Q: 6. Is there a separate dimmer to adjust the output without changing color temperature?

A: This lights feature a separate dimmer knob which will not change the color temperature of the light while adjusted.

Q: 7. Does the F8 have a bowens mount option for softboxes etc?

A: I'm not sure about the option you mention. I bought the speed ring and the softbox specifically made for the light by Chimera. It's lovely. (expensive, but worth it)

Q: 8. What is the included cable like from the battery to the strobe head? It looks somewhat proprietary from the photos?

A: Hi, it uses a proprietary cable connection.

Q: 9. What is the output equivalent of these lights when compared to the Tungsten standard, i.e., 1K, 2K, etc.?

A: LED lights in general and like the Dracast Palette TrueColor LED4000 Soft Panel are not rated in watts. LED lights are rated in Lumen, Lux and or FootCandles. The rating on this light is, 2800K: 994 fc / 10,700 Lux at 3.3' / 1 m 5600K: 825 fc / 8890 Lux at 3.3' / 1 m My guess is it is like a 500-750 watt tungsten light. But does not have the same throw.

Q: 10. Hi, can I plug this up via USB to my MacBook and program the button to command+K which is the keys entered on the keyboard to fire a camera on Capture One tethered software?

A: You need the core module plus button to make it work. I would recommend the starter kit. It comes with two buttons, slider, dial, and core. In the software you can customize the button and they support capture one.