The Rosco 4-Channel RF Remote for VariColor RGBW LED Controllerallows you to control a RoscoLED VariColor RF LED Controller for VariColor RGBW LED Tape, at a range up to 164'. The remote features a color wheel, white spectrum presets, and discrete red-, green-, blue-, and white-channel controls, which enable you to utilize the full capacity of your RoscoLED VariColor Tape with precise color mixing.

For VariColor RGBW LED Tape    Dimming and Color Control    Color Wheel    White Spectrum Presets    Discrete Red/Green/Blue/White Controls    Brightness/Light Intensity Levels    Store and Recall Scenes    Play/Pause Presets with 10 Presets

• Touch to select color 
• Drag finger to fine tune your color with RGBW mixing

• Tap to switch through warm white, neutral white, or cool white (uses RGB color mixing)

• Red Channel: Click to turn on/off red output, press and hold down to increase/decrease the light intensity/brightness of the channel
• Green Channel: Click to turn on/off green output, press and hold down to increase/decrease the light intensity/brightness of the channel
• Blue Channel: Click to turn on/off blue output, press and hold down to increase/decrease the light intensity/brightness of the channel
• White Channel: Click to turn on/off white output, press and hold down to increase/decrease the light intensity/brightness of the channel

• Press and hold down to decrease or increase light intensity
• Can be used on a preset color or when dialing in your own selections

• Press and hold down to save current outputs
• Click to recall the saved color/effect you saved
• Save up to two colors per scene by repeating this process for Scene 1

• Click once to scroll through the 10 preset colors
• Use the presets in static mode

• Illuminates orange to indicate a response between your finger and the remote

• Press to turn the remote on or off

Related Questions and Answers

Q: 1. How does the photo metrics compare with the Skypanel 360?

A: At a distance of 3m and with the standard diffusion, the Arri Skypanel S360C measures 5,633 lux at 3200K and 5133 lux at 5600K. In comparison to the Dyno 1200C at the same distance and in standard mode, the lux rating at 3200K is 2080 lux while at 5600K the lux rating is 2237.

Q: 2. Can this light be used as a static, constant light source (say for example I want to light a wall with a warm white light), or do they only cycle/strobe?

A: Yes, it can be constant.

Q: 3. Is a charging cable included with this remote controller?

A: A USB-C charging cable is not included with the DJI FPV Remote Controller 3.

Q: 4. Does this RC2 new control will work with older drones ? Air 2A and Mini 2 ?

A: At the moment, the DJI RC 2 Remote Controller only supports the Air 3. DJI is planning to add support for other drone models in future updates.

Q: 5. Will this work with the Mavic 2 pro?

A: The DJI RC 2 Controller is not compatible with the Mavic 2 Pro.

Q: 6. Does flying in manual mode decrease the Avata 2's flight time?

A: For the DJI Avata 2, all flight assistance controls, precise hovering, auto brake features are all disabled when in manual mode and will allow your drone to function at top speed. A flight without assistance and speed limitations, may result in a shorter battery life based on the user control.

Q: 7. does it work with the dji neo?

A: Yes, the DJI RC 2 Remote Controller is compatible with the DJI Neo drone.

Q: 8. Can I get a clean HDMI output? , that is, without the screen information.

A: The DJI RC 2 Remote Controller will not have an HDMI output.

Q: 9. Does this fixture come with a power cable?

A: Yes, the Blizzard LB-Par Quad RGBW LED Light comes with a power cord.

Q: 10. Will this work with DJI Mavic Air 2 ?

A: At the moment, the DJI RC 2 Remote Controller is only compatible with the DJI Air 3 drone. It is not compatible with the DJI Mavic Air 2.