Thin Right-Angle Micro-Hdmi To Hdmi Cable 15" Ufar90D15

Thin Right-angle Micro-hdmi To Hdmi Cable 15" Ufar90d15

Product Code: eq60486
Availability: In Stock

$89.97 $120.56

Qty

8 reviews Write a review

Description
Reviews (8)

Connect your camera neatly with the 15" Camera Motion Research UFAR90D15 Thin Right-Angle Micro-HDMI to HDMI Cable. It features gold-plated connectors and supports resolutions up to DCI 4K (4096 x 2160). The cable's short length makes it well suited for use in connecting your camera to a UAV, gimbal, or in other mounted situations where a long cable might get in the way.

Supports Up to 4096 x 2160 4K Resolution Gold-Plated Connectors Flexible, Lightweight Design

Parameters
Connector 1	HDMI Type-A Male
Connector 2	HDMI Type-D Male Right Angle
Cable Length	15" / 38.1 cm
Bandwidth	18 Gb/s
Maximum Resolution Support	4096 x 2160
HDMI Version	2.0
Connector Plating	Gold
Outer Diameter	0.098" / 2.5 mm
Weight	0.49 oz / 14 g
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	7 x 4 x 0.2"

Flexible, lightweight, durable design for use in UAVs, gimbals, and other camera-mounted scenarios

Related Questions and Answers

Q: 1. Does this work with a7s plus Atomos Ninja Flame for 4K?

A: Yes

Q: 2. Will this work with a movcam cage on A7s? Some plugs are too thick to fit.

A: Atomos is aware that these cables are often used with cages that have very little clearance for jacks. The connector on the micro side couldn't be much smaller and have proper insulation. We believe this will fit the a7s movcam slot. Without a physical test, there cannot be 100% certainty. You do have our 30 day return policy.

Q: 3. Does this support 4K 60fps with external RAW from an Atomos Ninja V to Sony FX3/A7siii?

A: The 8Sinn eXtraThin HDMI Cable (31.5") BH #8S8XTHHDMIHD will support 4K at 60 FPS.

Q: 4. How long is the straight section of the miniHDMI connector before it angles? Wonder if it might work with a SHAPE cage on the a7s ii.

A: Hello umon K, its a little bit under 1 just about 9/16 of an inch.

Q: 5. Hi there, interested if this will provide 4K 60p capabilities for recording 10 bit 4:2:2 with HDMI 2.0 ? If not, do you know of any other micro HDMI to HDMI cables that B&H carries? Thank you

A: This cable should handle those requirements, however it is not an HDMI 2.0 cable, its 1.4.

Q: 6. Does this support 4k 60fps to support Atomos Ninja V to Fujifilm XT4?

A: Yes, This HDMI cable supports 4K 60p from the Fujifilm X-T4.

Q: 7. I want to use this cable on my a7s with the atomos ninja assassin, Does this cable support 4k output?

A: Kelvin,Our HDMI cables are not compatible with 4k signals.Thanks,Michael

Q: 8. What is the speed of this cable? Is it at least 18 Gbps?

A: According to Atomos, "ATOMCAB007 is a 1.4 HDMI cable and its maximum speed is 10.2Gbps. This cable is not recommended for resolutions and frame rates above 4k 30p. If your customer is planning to shoot 4k 60p, this cable will not be suitable and a 2.0 HDMI cable would be required."

Q: 9. will this work properly using a Sony a7sii? thanks for you time.

A: This cable is compatible with a SONY Alpha a7sii.

Q: 10. Hi. Is the "micro side" Lshape of the cable long enought to reach all the way through a smallrig hdmi clamp mounted on a cage? Is there a non L shaped version?

A: You might want to go with a standard micro HDMI to HDMI. We have a variety of micro HDMI to HDMI that should work for you.

Ken	28/08/2024
[7 x 4 x 0.2"] If you own a Canon EOS M50 and are wanting to use an external monitor, this cable is a MUST. Canon weirdly decided the best place for the HDMI port on the Canon M50 was on the RIGHT-hand side of the camera body... you know, where you HOLD IT. So you use any other HDMI cable plugged into the Canon M50, it's constantly jabbing you in the hand, and you're putting pressure on it and the HDMI port, none of which is a good thing! Other right-angle micro-HDMI cables help a little bit, but because of their orientation they push the cable either back towards the operator or forward in the direction of the lens (the latter makes the inclusion of a cage for the M50 nearly impossible). THIS right-angle micro-HDMI cable sends the cable straight up, making the camera much easier to hold in your right hand, and much easier to connect to an external display. 5

John Raleigh	24/08/2024
[Gold] Extremely lightweight so i have no issues with this connected with a gimbal and monitor. doesn't feel like this would easily break either. Unexpectedly this is exactly what i needed for a micro hdmi 5

Steve	24/07/2024
[18 Gb/s] I was very happy with this cable. I bought several different ones to see which worked and this was one of two that didn't fail and it has the hdmi logo printed on it so I know it's not a knock off like some of the others. Would definitely buy again. 5

Andrew	11/07/2024
[18 Gb/s] It works. What else do you need to know? 5

Michel	19/06/2024
[18 Gb/s] Bough this cable to connect Canon R 50 to my Viltrox . I needed a cable with a 90 degree because on the R 50 the connection is on the right…same side as the camera grip !! The cable works well and is relatively comfortable while holding camera. You still have to be careful when handling so as not risk to damaging the connector . 5

pat	15/05/2024
[18 Gb/s] I am using a GH4 with a ronin M and there aren't many things that are available for that particular application. This product seems to work well has no drag it's a little fragile but you have to be careful with all the cables going into the GH4. 5

Kelsee	21/04/2024
[7 x 4 x 0.2"] Even though there isn't any info on this cable I took a chance and I'm glad I did. This HDMI cable works amazingly with my DJI Ronin S. Ive been looking for a light weight low profile HDMI cable for awhile. Im glad i found this one. I needed it to fit in a tight space and the adapters i found were still too big to fit where i needed it. This doesn't mess with the balance at all. I could not recommend this cable more. 5

Sedrick	08/04/2024
[7 x 4 x 0.2"] Very convenient and works perfectly. The right angled connector keeps everything out of the way and thinness makes it manageable. Also pleasantly pleased with the durability of a this thin cable. 5