Ufar90D30 Micro-Hdmi To Hdmi Cable 31" Right-Angle

Ufar90d30 Micro-hdmi To Hdmi Cable 31" Right-angle

Product Code: eq60487
Availability: In Stock

$104.97 $144.86

Qty

6 reviews Write a review

Description
Reviews (6)

Connect your camera neatly with the 31" Camera Motion Research UFAR90D30 Thin Right-Angle Micro-HDMI to HDMI Cable. It features gold-plated connectors and supports resolutions up to DCI 4K (4096 x 2160). The cable's short length makes it well suited for use in connecting your camera to a UAV, gimbal, or in other mounted situations where a long cable might get in the way.

Supports Up to 4096 x 2160 4K Resolution Gold-Plated Connectors Flexible, Lightweight Design

Parameters
Connector 1	HDMI Type-A Male
Connector 2	HDMI Type-D Male Right Angle
Cable Length	31" / 78.74 cm
Bandwidth	18 Gb/s
Maximum Resolution Support	4096 x 2160
HDMI Version	2.0
Connector Plating	Gold
Outer Diameter	0.098" / 2.5 mm
Weight	0.6 oz / 17 g
Packaging Info
Package Weight	0.05 lb
Box Dimensions (LxWxH)	7.05 x 3.85 x 0.45"

Flexible, lightweight, durable design for use in UAVs, gimbals, and other camera-mounted scenarios

Related Questions and Answers

Q: 1. Will this carry a 4k signal to the shogun from a sony a7s?

A: yes

Q: 2. Will this work with a movcam cage on A7s? Some plugs are too thick to fit.

A: Atomos is aware that these cables are often used with cages that have very little clearance for jacks. The connector on the micro side couldn't be much smaller and have proper insulation. We believe this will fit the a7s movcam slot. Without a physical test, there cannot be 100% certainty. You do have our 30 day return policy.

Q: 3. will this work properly using a Sony a7sii? thanks for you time.

A: This cable is compatible with a SONY Alpha a7sii.

Q: 4. Does this support 4k 60fps to support Atomos Ninja V to Fujifilm XT4?

A: Yes, This HDMI cable supports 4K 60p from the Fujifilm X-T4.

Q: 5. Would this cable support 4K60p from a GH5 to a Atomos Ninja Inferno?

A: Indeed it will.

Q: 6. What is the speed of this cable? Is it at least 18 Gbps?

A: According to Atomos, "ATOMCAB007 is a 1.4 HDMI cable and its maximum speed is 10.2Gbps. This cable is not recommended for resolutions and frame rates above 4k 30p. If your customer is planning to shoot 4k 60p, this cable will not be suitable and a 2.0 HDMI cable would be required."

Q: 7. Right angle hdmi

A: The right angle is Micro HDMI

Q: 8. Hi there, interested if this will provide 4K 60p capabilities for recording 10 bit 4:2:2 with HDMI 2.0 ? If not, do you know of any other micro HDMI to HDMI cables that B&H carries? Thank you

A: This cable should handle those requirements, however it is not an HDMI 2.0 cable, its 1.4.

Q: 9. Will this work with an a7sii to a tv/monitor?

A: Hello Shopper, yes it is a standard standard HDMI on the full side, that can fit onto your TV. please note the max length is 17.7 inches.

Q: 10. Does this work with a7s plus Atomos Ninja Flame for 4K?

A: Yes

pat	09/09/2024
[0.05 lb] I am using a GH4 with a ronin M and there aren't many things that are available for that particular application. This product seems to work well has no drag it's a little fragile but you have to be careful with all the cables going into the GH4. 5

Casey	01/09/2024
[18 Gb/s] Bought this to use with my G85, Ronin-M, and Andycine A6. Haven't had it long, but so far so good. Cable is light and is the perfect length for the Ronin-M. A little more than I wanted to pay for a cable, but it works perfectly for my use! 5

Andrew	25/07/2024
[0.05 lb] It works. What else do you need to know? 5

Kelsee	28/06/2024
[4096 x 2160] Even though there isn't any info on this cable I took a chance and I'm glad I did. This HDMI cable works amazingly with my DJI Ronin S. Ive been looking for a light weight low profile HDMI cable for awhile. Im glad i found this one. I needed it to fit in a tight space and the adapters i found were still too big to fit where i needed it. This doesn't mess with the balance at all. I could not recommend this cable more. 5

Steve	15/06/2024
[4096 x 2160] I was very happy with this cable. I bought several different ones to see which worked and this was one of two that didn't fail and it has the hdmi logo printed on it so I know it's not a knock off like some of the others. Would definitely buy again. 5

John Raleigh	01/05/2024
[0.05 lb] Extremely lightweight so i have no issues with this connected with a gimbal and monitor. doesn't feel like this would easily break either. Unexpectedly this is exactly what i needed for a micro hdmi 5