A cine-style lens that covers full-frame sensors, the SLR Magic APO HyperPrime CINE 32mm T2.1 Lens PL EF Mountprojects a 46.31mm image circle and is suitable for use with select cameras having an 8K sensor. It features cine-style focus and iris gears and an internal focus design that allows you to pull focus without the length of the lens changing. This makes it well-suited for use with rod-mounted lens accessories and matte boxes. The lens features a PL mount with an EF-mount adapter.

The 300° of focus rotation provides precise focus pulls, especially when working at close focus. The lens focuses in the industry-standard direction and has a 95mm front diameter and an 82mm filter thread. The front of the lens does not rotate as you change focus, which may allow for the use of clip-on matte boxes and sunshades (depending on weight) as well as polarizing filters.

Covers Full-Frame Sensors    46.31mm Image Circle    T2.1 to T22 Aperture Range    Suitable for 8K Resolution Sensors    Cine-Style Focus and Iris Gears    300° Focus Rotation    Internal Focus, Nonrotating Front    95mm Front Diameter, 82mm Filter Thread    PL to EF Mount Adapter

The lens covers full-frame sensors.

The internal focus design allows you to pull focus without the length of the lens changing. This is especially important when working with rod-mounted lens accessories such as follow focus units so that the gears remain engaged as focus changes. The consistent lens length also makes using a rod-mounted matte box simpler, as there is no concern for pushing into or pulling out of the matte box, and you don't need a bellows-style antireflection ring.

Built-in iris and focus gears follow industry standards, allowing you to work with optional follow focus units and lens gear motors.

300° of focus rotation enables precise focus adjustment, especially as you focus close to the lens.

Related Questions and Answers

Q: 1. The iris ring has a little bit of drag when rotating compared to others lenses, is that normal?

A: Yes, that sounds normal.

Q: 2. Is there any electronic connection to camera or is it fully manual?

A: The, SLR Magic 10mm T2.1 Hyperprime Cine Lens (MFT Mount) is a fully manual lens without electronic connections.

Q: 3. Between this and 8mm of Slr Magic, is there any image quality difference since 10mm is way expensive?

A: The image quality should be comparable. What you are paying for is a far more robust housing in the 10mm. It is rugged for it is meant to be used on set all day, every day. The 8mm is designed to be much lighter since its principal use is for drones.

Q: 4. What is the filter thread diameter?

A: 62mm, not 58mm.

Q: 5. Are these the same optical design as the 'SLR Magic APO HyperPrime CINE' line? I'm guessing these are just difference mechanically/physically?

A: Yes, the optics are the same as past SLR Magic offerings.

Q: 6. Can you use an 85mm slip-on cap with this lens?

A: Yes. Please review the following item PolarPro 77 to 82mm Defender Lens Cover BH #PODFNDR82 • MFR #DFNDR-82 https://bhpho.to/3wp1RDr

Q: 7. Will it work for BMPCC4k with XL speed booster?

A: Yes, this lens covers a Full-Frame Sensor. It will work with XL EF Speed booster.

Q: 8. What is the focus rotation?

A: The focus rotation of this lens is the nearly world-wide standard of counter-clockwise to infinity (while standing behind the camera.) The aperture, on the other hand, is opposite to most aperture rings. It goes counter-clockwise to higher, not lower, f/stops.

Q: 9. Does this lens come with a lens hood? Shows in photo but not in the list of included stuff.

A: It sure does.

Q: 10. Will this work on both URSA 4.6K and BMPCC 6K ?

A: Yes, the SLR Magic APO MicroPrime Cine 32mm Lens uses a Canon EF Mount. The Blackmagic URSA 4.6K and BMPCC 6K also have a Canon EF Mount.