Genustech Monitor Bracket For Scriptshade

Genustech Monitor Bracket For Scriptshade - Set Of 2

Product Code: eq60773
Availability: In Stock

$360.00 $457.20

Qty

7 reviews Write a review

Description
Reviews (7)

The Genustech Monitor Bracket for ScriptShade - Set of 2consists of two brackets that mount onto 15mm LWS rods and enables mounting a smartphone, tablet, or thin monitor with your ScriptShade prompter. Each bracket features an adjustable clamp arrangement that allows you to use devices up to 0.55" thick.

For Phones, Tablets, Slim Monitors Mounts onto 15mm LWS Rods Supports Devices up to 0.55" Thick

Key Specs
Rod Standard	15 mm LWS / 60 mm Spacing
Rod Ports	2x 15 mm Rod Port
Mounting
Rod Standard	15 mm LWS / 60 mm Spacing
Rod Ports	2x 15 mm Rod Port
General
Materials	Aluminum
Dimensions	Length: 4.35" / 11.05 cm Height: 1.37" / 3.48 cm (Closed) Width: 1.61" / 4.09 cm
Weight	7.4 oz / 209.8 g

Related Questions and Answers

Q: 1. Can the swivel attachment be removed if the bolt on the end back out?

A: Yes it can.

Q: 2. What is the largest monitor it can accommodate?

A: We would recommend not going over a 7" monitor.

Q: 3. Do they fit the avenger A1020CS combo stand 20 steel?

A: No, the Matthews Big F'ing Monitor Wheel are made and designed for the following two units Monitor Stand II (249562) and Slider Stand (249561)

Q: 4. Can you flip the bottom bar so the nato rail and rosette are on the opposite sides? Nato right. Rossette left.

A: The bottom bar of the Tilta Hydra Alien Monitor Bracket can be switched to either side.

Q: 5. Will this mini-jib support the panasonic ag-ac90?

A: Hello, I don't know if you received an answer yet... But the reported weight of the ag-ac90 is 3.3-3.9 lbs. According to genus tech the max camera Weight is 9.36 lbs.

Q: 6. I've never used a jib before. Thinking of getting for use with a Canon XA20 and/or EOS 70D. I need clarification on how these work. Can I put on my Manfrotto 503 head? If I set my camera for the view I want at eye level, will it maintain that orientation when I raise the camera to full height? Or would I need to view with my Nexus 7 via wi-fi to be sure I'm getting the same field? When fully extended will I have full control of the camera to get the view I want? Will the jib raise and lower smoothly so I can shoot video while moving? Would you recommend the Genustech Mini for my use? I need something very portable, quick and easy to set up and take down by one person. Any suggestions for an alternative jib? I'd like something in the $500 range. Thank you!

A: Can I put on my Manfrotto 503 head? answer yes If I set my camera for the view I want at eye level, will it maintain that orientation when I raise the camera to full height? answer - it will maintain the level but not the view, you will need to use the tripod head to tilt down while raising the jib and tilt up while lowering it and yes you would need to use your Nexus 7 via wifi just to make sure.Will the jib raise and lower smoothly so I can shoot video while moving? - as long as the jib is properly balanced with counter weights or sand bags then yes it will go up an d down smoothly.and yes i would recomend it for your use

Q: 7. Is this compatible with the SmallHD Cine 7

A: The ARRI artemis Monitor Bracket Gen. 2 for SmallHD (7") is not compatible with the SmallHD Cine 7 as the dimensions for the SmallHD Cine 7 and the SmallHD 703 are different.

Q: 8. Is there a mounting point on top of the cage (near the Movcam logo?)

A: There are mounting holes all around the perimeter of the cage, though not on the top portion.

Q: 9. What screw sizes are needed for the back panel?

A: The battery plate mounting holes are 4-40.

Q: 10. Will this fit on the Odyssey 7Q+?

A: They are compatible because there is no physical difference in terms of mounting between the 7Q and 7Q+.

JustinJames	23/08/2024
[Aluminum] Using this on a DJI Phantom 2 controller, I found it a little bit of a fiddle to install - requiring three different Allen keys (3mm, 2.5mm and 1.5mm) which EVERY boy should have in his tool kit. In the same way, every boy should know how to use those keys and, using his eyes (his primary source of knowledge which solve 80% of all mechanical problems) should be able to install this so it works. It's very adaptable and, with the inner hole suitable for mounting this on a DJI controller, it provides adequate room for fingers - I mean, the last time I looked, the controls operate via fingers, not fists - and no, fists are not going to fit, but fingers do. If this is not deemed spacious enough, perhaps the pilots concerned should stick to something which requires whole hands: like digging in the garden or turning on taps. One does not need a wrench - just a bit of simple DIY fun and... think, when you get it right, you'll really impress the neighbours, the wife, the kids, the dogs and, of course, yourself. In addition, attach a monitor like the FlySight Black Pearl which is light enough and excellent enough (wih a compact battery) for FPV use. Of course an 8 television set with huge battery is going to be a problem, but then that has no place in an environment where a smaller monitor is all that is needed. Big may be better in the bedroom, but it's unnecessary here. At $$it's money well, and intelligently, spent. It works very well for me. 5

Mellajean	21/08/2024
[Aluminum] This product was used to mount projector screens. The brackets were so easy to use, durable, yet light enough to handle over head, and the end result was a nice finished look. 5

Chris	06/07/2024
[Aluminum] Own a trinity 1 and don’t own this? A must if you want your head properly balanced. Adds the needed weight to the bottom of the trinity much like the trinity 2 needs the weight at the top of the head. 5

anyonymous	06/07/2024
[Aluminum] I selected this ceiling bracket because it was the cleanest looking one I could find on the internet. I used it for a 'Home Theater' in our 'bonus room', and it has functioned exactly as advertised. It is very strong and offers lots of adjustments. Instructions were clear, but it does take a while to figure out all the ways it can be adjusted. I would recommend this product to anyone. 5