The 6' Mogami Gold 3.5mm TRS to Dual XLR Y-Cable 6ftis a high-quality, 2-conductor cable that splits a stereo (L/R) audio signal at the 3.5mm connector into two mono signals (L and R) at the XLR connectors. It allows for a variety of cabling options including connecting the output of a portable media player, laptop, smartphone, tablet, or similar device to the inputs of a mixer or professional audio gear equipped with XLR connectors.

Rugged and flexible, the high-performance cable features connectors with gold-plated contacts, individually shielded conductors, and a low-noise, abrasion-resistant PVC jacket—all designed to pass the signal without altering the audio quality.

Connects Portable Devices to XLR Inputs    3.5mm TRS Stereo Mini Connector    2 x XLR Male Mono Connectors    Gold-Plated Connectors    Two Independently Shielded Conductors    Spiral Bare-Copper Shield    Mogami W2930 Cable    Flexible, Low-Noise PVC Jacket    Length: 6'    Limited Lifetime Warranty

Related Questions and Answers

Q: 1. Will this split a GO 2 receiver into CH1 and CH2 so I can monitor two lavs separately?

A: Yes, the Cable Techniques 3.5mm Right-Angle TRS to Dual Low-Profile TA3M Mini-XLR Y Cable can be used with the RODE Wireless GO II Digital Wireless Microphone System and will split the audio from each transmitter onto separate channels when the receiver is set for stereo mode. Be aware that this cable has TA3 mini-XLR connectors for use with cameras like the Canon EOS C70 or the Blackmagic Pocket Cinema Camera 6K Pro, or other audio devices equipped with mini-XLR mic inputs.

Q: 2. Which Mogami wire is used in this cable?

A: The Cable Techniques CT-PXD-325 3-Pin XLR Mogami Microphone Cable 110-Ohm Digital is constructed with 110 Ohm digital Mogami microphone cable like the Mogami W3080 110 Ohm AES/EBU Digital Audio Cable (B&H # MOW3080328BK).

Q: 3. If the split is 18" from the end, which side is closer to the split? The XLR or the 3.5mm?

A: The XLR connectors on the Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable (6') are closer to the split end of the cable.

Q: 4. Will this cable work with the Rode VideoMic NTG?

A: Yes the Rode SC8 cable is directly compatible with the Rode Videomic NTG microphone.

Q: 5. Is it a balanced cable?

A: No it is not balanced. TS (Tip Sleeve) - can never be balanced

Q: 6. Can I gang two IndiPro batteries (eg Micro series 98's) and power the LS120d-II via the d-tap on the it's controller?

A: Yes you can gang 2 Batteries to power a unit, but If you plan to do it by the D-tap on the battery, it has a 3 amp max output through the D-tap on the battery, But if you do it through a the D-tap on a plate "V mount or Gold mount plate" it would be fine

Q: 7. Is the pin assign compatible with ProTools C24 console, or other protools interfaces?

A: The Mogami Gold 8 Channel Analog Snake Cable, DB-25 to 8x XLR Female - 5' uses a common pin-out configuration that should be compatible with Avid's C|24 console. For another option directly from Avid, we recommend the Avid DB25-XLRM DigiSnake - Analog or Digital Output Snake (4-Foot) (BH #AVDB25XMS4): https://bhpho.to/3tQS2y7

Q: 8. They have this same cable but instead of TS with balanced TRS?

A: No, I'm sorry, we do not.

Q: 9. I need the 20' cord but doesn't it need the female on one end to work?

A: This cable is designed to work with microphones that have a removable 3.5mm cable. I would recommend the Pearstone Stereo Mini Male to Stereo Mini Female Extension Cable (Black, 25'), BH #PEMMSB125B, which can be attached to your existing cable.

Q: 10. Since this is passive, it's bidirectional, right? So I can take the signal from XLR line level to an 1/8" video capture input.

A: The Sescom AUD-TRS-BAL 3.5mm Stereo Unbalanced Audio to Dual XLR Balanced Converter Cable has male connectors on the XLR ends (which are used for connection to XLR inputs) and converts an unbalanced 1/8" (3.5mm) stereo output signal to a balanced XLR input signal, so it would not work. As an option for connecting dual XLR line output to an 1/8" (3.5mm) line input, you can use a standard Y-cable like the Hosa Technology Stereo Mini Angled Male to Two 3-Pin XLR Female Y-Cable - 1' (B&H # HOYCSMMR2XF1). If the 1/8" (3.5mm) input is a mic-level input, you can use a level-matching cable like the Sescom Attenuating Line to Mic Level Cable - TRS Male to Female XLR, 18" (B&H # SES43DBMZ2XJ), which will convert the line-level signal to mic level.