This 50' Mogami Gold AES/EBU DB-25 Male Digital Audio Cable 50ftmeets AES/EBU specifications with 110-ohm impedance. Its cellular PP (polypropylene) insulation material results in lower attenuation than other cable builds. The cable's pinout is compatible with the Tascam AES 8-channel I/O format making it compatible with Avid/Digidesign, Panasonic, RME, and Tascam digital recording machines that use the DB-25 connector.

Since AES/EBU digital audio cable has low capacitance characteristics, it can result in high-quality analog audio transmission in general, especially for high-frequency-range material.

Tascam AES/EBU pinout

DB-25 connectors with gold contacts

Ultra-flexible with long flex life, maintaining excellent strength characteristics

Related Questions and Answers

Q: 1. why would anyone need a cable this long

A: The Mogami Gold Stereo 1/4 Male to Stereo 1/4 Female Headphone Extension Cable is designed primarily as a quality headphone extension cable.

Q: 2. Can the AES/EBU work as a standard XLR splitter?

A: The Sescom SES-AES-EBU-Y Impedance Matching AES/EBU Y-Splitter Cable is designed specifically for digital audio, not analog audio. There can be a problem with impedance mismatch if you use it with analog audio and standard XLR cables, since digital audio is typically 120 ohms and analog audio is 50 ohms. If you need an XLR Y-adapter for analog audio signal, you can use the Hosa Technology YXM-101.5 XLR Female to Dual XLR Male Audio Y-Cable - 18" (B&H # HOYCXF2XM18).

Q: 3. Is the pin assign compatible with ProTools C24 console, or other protools interfaces?

A: The Mogami Gold 8 Channel Analog Snake Cable, DB-25 to 8x XLR Female - 5' uses a common pin-out configuration that should be compatible with Avid's C|24 console. For another option directly from Avid, we recommend the Avid DB25-XLRM DigiSnake - Analog or Digital Output Snake (4-Foot) (BH #AVDB25XMS4): https://bhpho.to/3tQS2y7

Q: 4. Which Mogami wire is used in this cable?

A: The Cable Techniques CT-PXD-325 3-Pin XLR Mogami Microphone Cable 110-Ohm Digital is constructed with 110 Ohm digital Mogami microphone cable like the Mogami W3080 110 Ohm AES/EBU Digital Audio Cable (B&H # MOW3080328BK).

Q: 5. What is the maximal sampling rate going through this cable? 48KHz? more?

A: It's a cable adapter including an impedance matching transformer fine for 48 kHz, 96 kHz, 192 kHz

Q: 6. Can I reverse the cable sides like the camera side in the H6 line out and the h6 side into the camera?

A: You can do that but that will not attenuate your signal and defeat the whole purpose of using an attenuation cable.

Q: 7. Can I use this cable with a RODE 3.5mm TRS Female to XLR Male Adapter to send audio from a Zoom F4(sub out) to a camera's XLR?

A: The Mogami Gold 3.5mm TRS Male to 3.5mm TRS Male Stereo Audio Cable (15') could be used to connect a line output to a mic input, but you will need to switch your camera's input to line level or attenuate the input gain to avoid overloading the preamp.

Q: 8. Will this work with GH4 or Sony A6400?

A: I use it for my GH4 and it works as it should. No problems

Q: 9. Canthis work with canon m50?

A: Yes, this attenuator cable could connect the headphone output of a device to the Canon M50.

Q: 10. Is there a way to reverse the connections? One male xlr to Two female xlr?

A: Using these gender changer/turn-around adapters will make this Y adapter work for you: QTY: 1 - Neutrik XLR Male to XLR Male Adapter - B&H # NENA3MM a href= http://bhpho.to/1AUy9Ga target= _blank http://bhpho.to/1AUy9Ga/aQTY: 2 - Neutrik XLR Female to XLR Female Adapter - B&H # NENA3FF a href= http://bhpho.to/1EWoJv0 target= _blank http://bhpho.to/1EWoJv0/a