The 1' Mogami MCP SS 01 CorePlus 1/4" TRS Cable 1'is a high-performance yet economical cable designed to transmit low-impedance, balanced line-level, and mic-level signals. It can be used to connect a wide variety of audio equipment for studio and live sound applications.

Small in size with a 6mm outer diameter, the MCP SS 01 features two 26-gauge conductors that maintain the clarity of your signal. A proprietary, ultrahigh-density spiral shield eliminates RF noise. The PVC jacket is extremely flexible and exhibits good resistance to rough handling and abrasion.

High-Performance for Studio & Live Sound    Clear Signal, Low Handling Noise    2-Conductor CorePlus Mic/Line Cable    Ultrahigh-Density Spiral Shield

• 1' 1/4" TRS male to 1/4" TRS male balanced cable
• Proprietary ultrahigh-density spiral shield eliminates noise
• Low-noise Cross Link Polyethylene insulation improves clarity
• Conductive polymer co-insulation eliminates handling noise
• Excellent results with low- or high-impedance equipment

Related Questions and Answers

Q: 1. Does this cable work between a Panasonic GH4 and a Beachtek MCC-2 adapter? Thank you.

A: The GH4 will have a3.5mm mic input unlike the older Lumix cameras. The SC25 will not be necessary. The standard 3.5 jack will work, the SC35 which is available separately, but included with most Beachtek products including the MCC-2 a href= http://bhpho.to/1C8lNYP target= _blank http://bhpho.to/1C8lNYP/a

Q: 2. Is this cable proprietary to the M1/150 receivers, or can it be used with other Hollyland devices with 3.5mm outputs?

A: The Hollyland 3.5mm TRS to Lightning Coiled Cable (12.6") is made for direct compatibility with the LARK M1 and the LARK 150 receivers, however, it will work with any 3.5mm TRS output.

Q: 3. Can I use this cable to send an audio feed(3.5mm/sub out) from a Zoom F4 Recorder into a cameral's XLR input, such as Sony FS7?

A: The Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable could be used to connect a line output to a camera's XLR inputs, but you should be sure to set the input level to line level to avoid overloading the camera's preamps.

Q: 4. how long is it?

A: The manufacturer has not published the length of the SmallRig 3.5mm TRS to USB-C Audio Cable.

Q: 5. Hello all, i need 18 of cable THEN the connectors length on top of that so total length would be 18 (cable) plus length of connectors? SO since the specs do not have a drawing i must spew a question - thank you -Rollo (canare wire neutrik XLR female to TRS gold

A: The total length is 18 - end to end.

Q: 6. Will this cable help me connect a Rode VideoMic with a 3.5 mm plug to my Canon Rebel T6 with its 2.5 mm remote control input? Thank you!

A: The Rebel T6 is not able to accept a mic input via its remote jack.

Q: 7. is it comparable for AVX EKP Camera Plug-On Digital Wireless Receiver (CH 8: 1920 to 1930 MHz)?

A: Yes it is.

Q: 8. Will this cable work with the Rode Videomic Pro Plus?

A: Yes. I bought one for that purpose.

Q: 9. Is this an attenuation cable? Meaning, does it take a line signal and dampen it to be appropriate for a mic input? Line signals (such as a headphone/line out port) are typically too strong for mic inputs. So either the device would have to have a mic out 3.5 port, or an attenuation cable would have to be used to make the signal suitable for my camera.

A: No, this is not an attenuation cable, this one from Whirlwind is: https://www.bhphotovideo.com/c/product/767986-REG/Whirlwind_WHH4NL3_5_WHH4NL3_5_Line_to_Microphone.html

Q: 10. can i run an SC8 from camera to zoom h1n then another SC8 from zoom h1n to rode videomicro?

A: Hello Phillip, this would depend on which inputs and outputs you are using. As long as you use a proper 1/8" TRS input and 1/8" TRS output you should be fine.