Ram Mounts Tough-Claw Xbox Adaptive Controller Mount

Ram Mounts Tough-claw Xbox Adaptive Controller Mount

Product Code: eq61150
Availability: In Stock

$302.97 $448.40

Qty

11 reviews Write a review

Description
Reviews (11)

Clamp this RAM Mounts Tough-Claw Xbox Adaptive Controller Mountfrom RAM Mounts Tough-Claw Xbox Adaptive Controller Mountto your wheelchair and enable the use of the Microsoft Xbox Adaptive Controller. The controller attaches directly to the diamond base adapter with a 1.5" ball and a double socket swivel arm, allowing for a 90° tilt so you can angle the adaptive controller to your desired position. When you're not using the controller, swap out the ball adapter with any compatible 1.5" ball base such as the RAM X-Grip cradle for phones and tablets. This mount can also be used on rails, bars, and flat surfaces. Included are mounting hardware and a hex wrench.

Works with Xbox Adaptive Controller 1.5" Diameter Rubber Ball Mount Clamps to Square, and Odd-shaped Rails Powder-Coated, Marine-Grade Aluminum

Parameters
Clamping Range	Rail/Tube Surfaces: 0.6 to 1.5" / 15 x 38 mm Flat Surfaces: 0 to 1.14" / 0 x 29 mm
Material of Construction	Powder-Coated, Marine-Grade Aluminum and High-Strength Composite
Ball Size	C Size 1.5" Rubber Ball
Weight	1.3 lb / 0.6 kg
Dimensions	13 x 5" / 33 x 12 cm When Straight
Packaging Info
Package Weight	1.32 lb
Box Dimensions (LxWxH)	9.55 x 8.35 x 3.25"

Designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.5" in outer diameter

Related Questions and Answers

Q: 1. Can the device hold the iPad air2 with an otter box?

A: No, this would not even fit the iPad Air with out the case. This is for the iPad Gens 1-4.

Q: 2. This work will these aputure/amaran series of lights?

A: Yes, the Matthews The Claw would be compatible with some Aputure/Amaran lights.

Q: 3. i want to film out the front windshield of my car using this and my galaxy a51 , will the x arms block the cameras?

A: It should not block them although we could not guarantee it since we have not tested this with a Samsung Galaxy A51.

Q: 4. how large a phone will this accept? my phone case size is 7 x 3.625

A: The Ram Mount EZ-On X-Grip Bicycle Mount will not fit a case or phone size 7 x 3.625. The maximum width it accepts is 3.25 and maximum height 4.25 .

Q: 5. Is it compatible with the charging kit? (https://www.bhphotovideo.com/c/product/1600081-REG/microsoft_sxw00001_xbox_play_n_charge.html)

A: No, the Microsoft Xbox One Wireless Controller (Gray/Blue) BH #MIXBWCGYBL is not compatible with the Microsoft Xbox Rechargeable Battery + USB Type-C Cable BH #MIXBPNC. You would need something like the HYPERKIN Tomee Xbox One Controller Battery Pack and Charge Cable BH #HYM07031.

Q: 6. I already have the RAM mount. Can the GOPro connector be purchased separately?

A: Yes. You will need the RAM MOUNTS 1" Diameter Ball with Custom GoPro Hero Adapter (BH #RAPB202UGOP1 • MFR #RAP-B-202U-GOP1).

Q: 7. What is the smallest diameter pipe this can clamp to? How much weight is it rated for?

A: The Matthews The Claw is made for T12 size tubes and does not work with smaller ones.

Q: 8. How do i connect it with my PC? does it come with bluetooth connection for my computer or my PC should have bluetooth

A: You can use a micro USB cable or you need a Microsoft Xbox Wireless Adapter for Windows B&H # MIXB1WLAW10 MFR # HK9-00001 to use it wireless.

Q: 9. There are no more images of this product? I want to see if on one side is the 1/4 female input and on the other side is the female 3/8 input. Or solo is 3/8?

A: It is female 3/8ths on one side and female 1/4 on the other side.

Q: 10. What's the widest the claw can take? I have a Yongnuo YN360 II light wand tube, will it be able to take it?

A: The Matthews 42030 will accommodate up to 5 inches cylinder tube.

anyonymous	29/09/2024
[1.32 lb] I wasn't sure how this would work. Sometimes gear like this looks good quality in a picture then you realize when you get it, it's made of a low quality plastic. This is well made and works well. Only thing it is missing is spring loaded clamp so that it holds in the open position as you loosen the jaws. 5

Justin	19/09/2024
[1.32 lb] Product is great. Was shipped fast and efficiently. 5

Warren	18/09/2024
[1.3 lb / 0.6 kg] I needed a secure mount for my iPhone XS on my Greenspeed Magnum recumbent cycle. After arrival, this mount was quick and easy to secure to horizontal accessory bar. After several rides, the phone held solidly in place, even on rough pavement, dirt paths, and gravel roads with pot holes. This product is a winner! 5

Steve	15/07/2024
[1.3 lb / 0.6 kg] Just what I needed to mount a GoPro action camera on my motorcycle. It easily mounts to multiple positions and holds securely. Vibration is not a problem at all. 5

William	11/07/2024
[1.32 lb] Going on a 10-day, 2,200 mile trip over Labor Day, I purchased a cheap handlebar phone mount thinking I was all set. However, on Day 3, the spring clamp inside the thing broke and I was about 800 miles into the trip....UGH!! Bought this when I got home, and I must say this IS the one to buy. Rugged and easy clamping, it is well worth the $. 5

Danny	07/07/2024
[1.32 lb] The handlebar mount from GoPro wouldn't allow me to point the camera it the direction I wanted. After researching mounts, I purchased this one and it performs great and mounts quickly. Also, fast shipping from B&H. 5

John	05/06/2024
[1.3 lb / 0.6 kg] Use this to attach my iPad on my bike trainer - holds tight with no wobble. Ram products are the best. 5

L	01/05/2024
[1.32 lb] I've mounted this clamp to oars, pipes. the sides of boats, mic stands, etc. A bit more expensive than some of the other GoPro clamps but worth it for the versatility. 5

anyonymous	17/04/2024
[1.32 lb] I Purchased a Ram mount tough-claw with X-grip, it clamps onto my handle bars for my motorcycle to hold my phone. This Ram mount is heavy duty!! I would definitely recommend this product. 5