Heden 0.8 Module Gear For Lm30 Motor

Product Code: eq61186
Availability: In Stock

$270.00 $342.90

Qty

9 reviews Write a review

Description
Reviews (9)

The HEDEN 0.8 Module Gear for LM30 Motorattaches to the motor via a 2-pin locking mechanism for 0.8 mod applications.

Attaches via 2-Pin Locking Mechanism

Parameters
Gear Standard	0.8 MOD
Diameter	1.38" / 35.0 mm
Width	0.24" / 6 mm

Related Questions and Answers

Q: 1. can I map the lens on this unit?

A: Yes, as per product description: A key feature of the YMER system is HEDEN's LenSaver Calibration, which provides a simple and effective way of calibrating for follow focus.

Q: 2. What else is in the package?

A: The system contains the following: · 1 x YMER-1 transmitter · 1 x YMER 1+1 receiver · 2 x Hedén digital servo motor M26VE-LX · 2 x Gear 0.8 module · 2 x Bracket with 19mm to 15mm reduction insert · 1 x White scale ring · 1 x Power cable · 2 x Motor cable · 1 x Hedén neck strap Sony NP-FM500H compatible battery and charger not included in package

Q: 3. Does this cord also work for the arc 1?

A: No, the Rhino Camera Gear Motor Cable (42", Straight to Right Angle) is designed for the ARC II.

Q: 4. any likelihood of frequency issues in other parts of the world?

A: We are not aware of any issues you may face. However with any wireless device this will be determined on what other signals are being used in the area.

Q: 5. What Country is this product manufactured ?

A: The Country of Origin for this product is Sweden.

Q: 6. Will the PDMovie Live Air PDL-TC-AFP controller work with this PDMovie Smart Motor? Link to the PDL-TC-AFP is here... https:/

A: The PDMOVIE MOTOR SMART Intelligent Focus Motor is an intelligent focus motor that independently uses lidar for focus and no controller at all.

Q: 7. What are the power requirements (amps/watts) to operate this motor?

A: HEDEN offers a D-Tap Power Cable for this motor, B&H # HEAC51. As long as you have this cable and a battery with a D-Tap Accessory Port you will be able to properly power the motor. B&H # HEAC51 - https://bhpho.to/2I4xw7B Battery Option - https://bhpho.to/2mzvEZW

Q: 8. Is there a way to change gear placement from back to front of focus motors in case of clearance issues? Like on some other motor

A: The motor placement cannot be changed, on the PDMOVIE MOTOR SMART Intelligent Focus Motor.

Q: 9. Good day, I want to buy only the follow focus antenna, heden Ymer 3, it is possible that they will sell it to me.

A: You will have to contact HEDEN to purchase individual parts.

Q: 10. How is this controlled? One speed, not adjustable? Is it a simple on-off switch? Ultimate goal is to make repeat captures, so syncing with my camera's 'record' button is important...

A: This product works in conjunction with the Rhino Camera Gear ARC II 4-Axis Motorized Head, BH #RHA24AMH. It is not a stand alone product. You will operate this through the Arc II and its dedicated App.

pmpcam63	19/09/2024
[0.8 MOD] I've never been let down by the quality of Chrosziel products. We use these gears a lot and they always come through. I would highly recommend this product. 5

Dan	21/08/2024
[0.8 MOD] This thicker wheel makes it possible to leave my motor in place, and change my lenses without re-placing the motor each time. If you're modifying photo lenses with gears (particularly if the outer diameter matches), this is a game changer to hack getting the gears in the same place 5

Andrew	16/08/2024
[0.8 MOD] Earlier this year I purchased a Heden M21VE dual pin motor and 2 of these gears in different pitches. These additional gears fit a 64 pitch (0.4 MOD) and 48 pitch (0.5 MOD) lens rings. The gear that comes with the motor (0.8 MOD) works with a 32 pitch lens ring. Also, make sure you use these with the correct motor. The larger motors require a larger diameter shaft and will not work with these gears. Conversely, the larger shaft dual pin gears will not work with the M21VE motor (I learned this lesson the hard way). 5

Richard	21/07/2024
[0.8 MOD] The Titla .08 MOD Gear is perfect. How many times does the standard non thick version come off the lens. With the thick gear it never comes off. Best purchase of the month. Will be buying a second one soon. 5

Timothy	22/06/2024
[0.8 MOD] Needed this for old lenses whose focus gear has a lot of travel. Works great. 5

Andrew	18/06/2024
[0.8 MOD] Earlier this year I purchased a Heden M21VE dual pin motor and 2 of these gears in different pitches. These additional gears fit a 64 pitch (0.4 MOD) and 48 pitch (0.5 MOD) lens rings. The gear that comes with the motor (0.8 MOD) works with a 32 pitch lens ring. The Heden motors and gears are very convenient in that the different gears can be changed quickly and easily for different pitches on lenses (examples are 32, 48, 64 pitch). They also attach to either side of the motor. Also, make sure you use these with the correct motor. The larger motors require a larger diameter shaft and will not work with these gears. Conversely, the larger shaft dual pin gears will not work with the M21VE motor (I learned this lesson the hard way). 5

Ian	16/05/2024
[0.8 MOD] I was on a shoot and really needed to be able to control a B4 Fujinon zoom lens with my Tilta hardware. Here comes the .6MOD to save the day. I really got lucky that B&H had it in stock. Note that the original gear is VERY tightly bound to the servo so you'll need a decent driver (I broke one of mine trying to get it off). 5

Jacob	29/04/2024
[0.8 MOD] This is a great digital motor for focus pullers. I use a Preston Cinema System and have always used Preston motors in the past. The form factor of this motor is so much better and i can build my camera tighter on remote heads. After a lot of research this motor is more efficient than the Preston DM-1X and half the size. DM-1X has a spin rate of 229 teeth per second and the M26VE-LX spins at 255 teeth per second so that means faster racks from minimum to infinity. The LX version of this motor is worth every penny. 5