Heden Lm30 Carat/Ymer Motor Cable Seo Title

Heden Lm30 Carat/ymer Motor Cable Seo Title

Product Code: eq61187
Availability: In Stock

$585.00 $854.10

Qty

15 reviews Write a review

Description
Reviews (15)

The HEDEN LM30 CARAT/YMER Motor Cable SEO Titleallows you to connect the HEDEN LM30 motor to the HEDEN CARAT or YMER receiver. The cable is 24" long and features a 7-pin LEMO connector on one end and 7-pin LEMO mini on the other.

Connect LM30 to CARAT/YMER Receiver 7-Pin LEMO to 7-Pin LEMO Mini 24" Cable Length

Parameters
Connector 1	LEMO 7-Pin 1B
Connector 2	LEMO 7-Pin Mini 0B
Cable Length	24" / 60 cm
Packaging Info
Package Weight	0.09 lb
Box Dimensions (LxWxH)	12.15 x 6.3 x 3.6"

Related Questions and Answers

Q: 1. How much power output is needed to power the cable and motor through a Sony NPF battery adapter? My adapter drops 7.4v power and I wanted to know if it is correct to power the Nucleus M motor.

A: The Nucleus M motor supports Voltage 7.2-24 V

Q: 2. What Country is this product manufactured ?

A: The Country of Origin for this product is Sweden.

Q: 3. Good day, I want to buy only the follow focus antenna, heden Ymer 3, it is possible that they will sell it to me.

A: You will have to contact HEDEN to purchase individual parts.

Q: 4. What type of zoom demand controller with work with this motor?

A: I would recommend the Preston Micro Force V+F3.

Q: 5. I have a RED DSMC2 with Tilta's C1 cage, which has a 7 pin connector that has MOTOR written on it. If I plug this cable into it, will it provide power and camera communication (REC start/stop) to my Nucleus M system?

A: No this will not work for Run stop controll of the camera this is used to connect a Nucleus-M 7-Pin Motor to Motor Cable from Tilta to connect one Nucleus-M lens control motor to another.

Q: 6. any likelihood of frequency issues in other parts of the world?

A: We are not aware of any issues you may face. However with any wireless device this will be determined on what other signals are being used in the area.

Q: 7. Will this work with Red Rock Micro Lens focus motor (their wirelessfocus system)?

A: Yes. I have the Torqu Motor and it controls mine from MVI Pro. Youll get FIZ (Focus Iris Zoom) Control from a Pilot or Bush Pilot controller.

Q: 8. Is this cable for use with non-EF lenses?

A: This is meant for separate motors mounted on 15mm or 19mm rails. It cannot be used directly with EF lenses.

Q: 9. I wonder if this cable is exactly the same as the one that the follow focus brings? because on the pictures it looks different... it doesn't have the two protections before the lemo and dtap like the original.

A: The cable is a different design, but the ends are appropriate for powering the motors from a P/D-tap source.

Q: 10. I have a RED DSMC2 with Tilta's C1 cage, which has a 7 pin connector with "Motor" written on top of it. If I plug this cable into the MOTOR connector on my cage, will it provide power and camera control (REC start/stop) ?

A: No this will not work for Run stop controll of the camera this is used to connect a Nucleus-M 7-Pin Motor to Motor Cable from Tilta to connect one Nucleus-M lens control motor to another.

anyonymous	22/09/2024
[LEMO 7-Pin 1B] It works perfectly 5

Joshua	21/09/2024
[0.09 lb] I find the Nucleus - M calibrates better at the lower voltage even with the torque set to the lowest setting. I found the Nucleus - M tried too hard at the stop points at 12volts and would not actually calibrate correctly. 5

Andrew	08/09/2024
[LEMO 7-Pin 1B] Earlier this year I purchased a Heden M21VE dual pin motor and 2 of these gears in different pitches. These additional gears fit a 64 pitch (0.4 MOD) and 48 pitch (0.5 MOD) lens rings. The gear that comes with the motor (0.8 MOD) works with a 32 pitch lens ring. Also, make sure you use these with the correct motor. The larger motors require a larger diameter shaft and will not work with these gears. Conversely, the larger shaft dual pin gears will not work with the M21VE motor (I learned this lesson the hard way). 5

Justin	22/07/2024
[LEMO 7-Pin 1B] I had my cable go bad a week ago and I ordered a new one and it worked perfectly. Always double check that it works as sometimes the different Teradek cables I've bought didn't work right out of the box. Anytime I've had that issue B&H replaced the damaged item quickly. 5

Fame	18/07/2024
[LEMO 7-Pin 1B] Paired this with my All in one combo made all the difference in the world. 5

Justin	13/06/2024
[0.09 lb] Improves the functions of the rs focus motor especially when combined with the rs4 gimbal’s function 5

Justin	13/06/2024
[0.09 lb] Improves the functions of the rs focus motor especially when combined with the rs4 gimbal’s function 5

anyonymous	06/06/2024
[24" / 60 cm] LO PROBE EN EL MOTOR Y NO TUVE NINGUN PROBLEMA! 5

Mary	18/05/2024
[LEMO 7-Pin 1B] Small and very lightweight. Easy to calibrate, but sometimes have to remove battery to re-calibrate. The thin controller that goes with is brilliant. And on/off switch would help. It’s tricky to figure out to push the battery to the side. 5

Matthew	16/05/2024
[LEMO 7-Pin 1B] If you've purchased a Nucleus-M kit, you may notice the version of this cable included with the purchase is surprisingly stiff, which makes bundling/tidying it a challenge. This one doesn't have that issue. 5