The 1 RU Black Box 30-Port DCX Digital KVM Matrix Switch 1RUfrom Black Box 30-Port DCX Digital KVM Matrix Switch 1RUis a matrix switch designed for small and medium sized applications. Featuring 30 RJ45 ports this matrix switch can support a maximum of 23 users/servers, with seven fixed user ports and 23 configurable ports. It has a 1920 x 1200 resolution at 60 Hz and supports server access modules (SAMs) and receivers using shielded CAT6 cables. Secure system configuration is provided by the web user interface, which is also compatible with tablet and mobile devices. A power supply and 19" rack mount ears are included.

1920 x 1200 Resolution at 60 Hz    Seven Fixed User Ports    23 Configurable Ports    Multi-View Thumbnail On-Screen Display    Supports Multiple Users    Supports Server Access Modules/Receivers    Power Supply    19" Rack Mount Ears

Multi-view thumbnail on-screen display

Exclusive and private connection modes add security level

Lossless HD video

Visual OSD so that all systems can be seen on the screen at the same time

Supports multiple users on Windows, MAC, and Linux-based computer systems

Migrate from analog to digital KVM

Designed for process monitoring and control, broadcast studios, medical labs, test beds, and advanced data centers where the personnel numbers are lower than in enterprise-sized organizations

Interface-powered server access modules (SAMs) extend DVI or DisplayPort and USB signals over shielded CAT6 or higher rating

In a Matrix setup, the SAM (Server Access Module) can be up to 32.8' from the DCX switch, and the user station can be up to 164' away from the DCX switch using shielded category rated cabling

In a Point-to-Point setup where the SAM (Server Access Module) connects to the DCX receiver directly, you may extend up to 164' from the SAM to the receiver

The DCX3000 delivers every pixel of every video frame with zero compression and zero latency

The SAMs support audio via the USB interface, and the receiver can output the audio through the 3.5mm jack

Related Questions and Answers

Q: 1. Is there an HDMI version of this?

A: The XD44L does not have an HDMI interface. There are a few ways we could do this. If you found, and I'm not sure they exist, a HDMI/SFP transceiver you could use our MSC-FS44FL. You could use the MSC-FS44FL with separate Transmit and Receive module, but that would reduce your effective capacity to a 2x2. http://www.matrixswitchcorp.com/products/MSC-FS44FL/ An MSC-XDM1000L would do what you need, but might be a little overkill. This is a modular unit and could be configured to any I/O that you might need. http://www.matrixswitchcorp.com/products/MSC-XDM1000L/ Thank you for considering Matrix Switch Corp. Let us know how we can help you further.

Q: 2. Does this switch reboot

A: The 4K HDMI switch can operate in auto mode and priority mode. The system can either automatically select the latest video source for display in auto mode, or automatically select a video source following priority order in priority mode. It will not cause the connected device to reboot.

Q: 3. Does anyone know if the Canon 7DII + the new 100-400II lens with hood and tripod collar attached, will fit this bag, or the 50 v2.0 model?I believe the new 100-400 II lens has a larger hood, and am not sure if the Think Tank bags will still accommodate it.

A: This holster will definitely hold my 100-400 mk2 with hood extended on either my canon 5dmk 3 or my 70d. but that said, it takes a bit of careful folding to fit the strap in as well.JBruce

Q: 4. is this 50 Ohm or 75 Ohm?

A: Since this is for Composite video signals and not for power or control, the unit is 75 Ohm.

Q: 5. can the inputs be used for 4 camcorders and can be switched in vmix?

A: We're afraid not, this is a 4 x 4 PCI HDMI Matrix Switch not a capture device. It does not have video capture capabilities. For a quad HDMI card that will work with vMix we recommend the Magewell Pro Capture Quad HDMI Card (4-Channel), B&H # MA400DEHDMI, instead. https://bhpho.to/2bE2GRV

Q: 6. Will it hold a Nikon D750 with Nikon 28-300 with hood mounted ?

A: I don't know. I use it with a Canon 5D MKIII and Canon 70-200mm f2.8 or Sigma 50-500mm f4 (each with the hood reversed and the holster unextended ) it works fine.

Q: 7. Will this work with SDI signal?

A: No it will only work with Composite Video.

Q: 8. With the lower extension out, will a 4.5 diameter lens hood fit into the bottom?

A: Enter hellothe answer is yes see Nikon D-7200 with Tamron 150-600mm + 4.7'' hoodBest holster !TxBoaz A.an answer to this question.

Q: 9. Will Nikon D5000 with Nikkor AF-S 200-500mm f/5.6E ED VR fit in this bag?

A: I use with a Nikon D750 and 80-400mm lens on, not extended. Of course it has a collar & foot, which does fit but tends to catch sometimes when removing the camera from the holster. You've have to be aware of this in cases where you are in a rush to shoot because it tends to be little combersome to get out. The 80-400mm with camera attached is 11 in length and the lens is 4 in diameter. I used the holster bag today and do often. All in all I fell Think Tank could have made it a little bit wider but I can deal with it, like it, and use it often.

Q: 10. Does anyone know the diameter of the pop down section of the holster?

A: Diameter is close to 5" and extends down roughly 3.5".