The highly flexible TASCAM Model 24 is a powerful, versatile, hybrid mixer/recorder/audio interface for both live and recording applications, well suited for bands, studios, conferences, podcasts, houses of worship, and more. The full-featured professional mixer offers 22 input channels including 16 microphone preamps with phantom power, two 1/4" Hi-Z jacks, 12 balanced 1/4" mono line inputs, and four balanced 1/4" stereo line inputs. Additionally, the last stereo input also accepts signals from a variety of sources including Bluetooth, USB, RCA, or a 3.5mm stereo mini jack.

There is single-knob compression available on the first 12 channels, while three auxiliary sends provide signal routing to a dedicated monitor and to one of 16 onboard multi-FX effects. The main and sub stereo buses offer simple grouping, as well as a selectable 7-band graphic EQ for fine tuning your mix. The Model 24 offers 21 faders, with 100mm of throw for quick and immediate mixing moves. Each channel may be assigned to receive audio from the live inputs, the internal multitrack recorder, or the USB 2.0 audio interface, allowing for versatility in any environment.

The onboard 24-track recorder takes its cue from TASCAM's Portastudio line, offering multitrack recording with the ability to record 22 tracks plus the stereo master internally. Multichannel playback for advanced live performance backing or mixing. What's more, the simple interface allows you to punch in/out of recording and playback without extensive menu diving. Additionally, the Model 24 features a 22 x 24 USB audio interfaced allowing for the transmission of 22 input channels plus the stereo master at up to 24-bit/48 kHz resolution.

22 x Input Channels    16 x Microphone Preamps    20 x Line Inputs (12 Mono + 4 Stereo)    Single-Knob Compressor    7-Band GEQ for Main or Monitor Outputs    3 x Aux Sends + Built-In Multi-FX    24-Track Recorder and Playback    USB 2.0 Audio Interface (24-In x 22-Out)    Wireless Bluetooth Connectivity

• Mixer
  • 22 total input channels
  • 16 microphone preamps with 48V Phantom power
  • Two Hi-Z instrument inputs
  • 20 balanced line inputs (12 mono, 4 stereo)
  • Single stereo multi-input channel for Bluetooth, USB, RCA or 3.5mm stereo input
  • Main and sub stereo buses
  • 3 x aux sends (monitor 1, monitor 2, and effects)
  • Single-knob compressor for channels 1-12
  • 7-band graphic stereo EQ selectable for main and monitor outputs
  • Wireless Bluetooth connectivity and playback
  • Onboard multieffects processor with 16 effects selections
  • 100mm faders capable of fine adjustment
  • Independent input channel assign for live, internal MTR, or USB playback
• Recorder
  • Multitrack recording function similar to the TASCAM Portastudio
  • 24 tracks (22 tracks + stereo master) can be recorded internally
  • Multichannel playback for advanced live performance backing or mixing
  • Punch in/out recording capability
• Audio Interface
  • USB 2.0 audio interface
  • 24 in (22 input channels + stereo master)
  • 22 out
  • Up to 24-bit/48 kHz recording quality

Related Questions and Answers

Q: 1. Is phase reverse available on all channels?

A: No. there is not phase reverse available. Reading through the Owners Manual, see below and on page 21: https://tascam.com/downloads/products/tascam/model_24/efs_model-24_om_vc.pdf

Q: 2. Does the Model 12 have USB delay for syncing to video like the Mixcast does?

A: Yes, firmware version 1.20 adds dual Audio Delay for both the USB and Main outputs of the Tascam Model 12 Integrated Production Suite Mixer/Recorder/USB Interface.

Q: 3. When 48V Phantom Pwr is employed, does feed all inputs? Any protection for Dynamic mics?

A: Yes; Phantom power is supplied to all XLR Mic inputs. Protection is built-in for Dynamic Mics.

Q: 4. What is the max gain on the mice preamp?

A: 50dB

Q: 5. Does this (and the other Models) record post fader for individual tracks to the SD card? The manual mentions a "post record switch" and "When this switch is on, signals from after the MAIN fader are recorded to the SD card." That's all the info in the manual about this feature. I need to know if this switch allows recording of each channel post fader to the SD card.

A: The Tascam Model 12 Integrated Production Suite Mixer/Recorder/USB Interface appears to standardly record "pre-fader" signals to the SD card. This indicates that the signal at the input source is being recorded before it is affected further down the signal chain by EQ and individual fader level settings. There are ways to change this, such as the "POST REC Switch" you mention, which would indicate a post-fader recording of each channels "mix" level signal. The manual also mentions the ability to select the positions that recording signals are sent from each channel, including the ability to send Pre or Post Compression and Post EQ.

Q: 6. Can two of these be chained together into a PC for more channels during multi-track recording?

A: No, it would not be possible to connect multiple USB mixers to one computer for a single recording.

Q: 7. Does the talkback feature work as a broadcast mixer?

A: The Talkback function on the TASCAM Mixcast 4 Podcast Mixer, Recorder, and USB Audio Interface allows you to speak to the participants privately over their headphones, as well as guests connected via USB, smartphone, and Bluetooth.

Q: 8. Would I need mic activator for Shure am 58 or Shure sm7b?

A: You will need a cloud lifter for the SM7B

Q: 9. Can you send to an external effects processor and get back the wet signal for your recording?

A: You can use the analog FX output to connect an external FX processor to this mixer. For returning the wet signal to mixer, you would need to use an available input channel on the board.

Q: 10. Is phase reverse offered on all the channels?

A: No phase reverse shown on any channels, or in the Operator Manual.