Rigwheels Cloud Mount Cable Clamps Set Of 8

Product Code: eq61268
Availability: In Stock

$600.00 $738.00

Qty

14 reviews Write a review

Description
Reviews (14)

This set of eight RigWheels Cloud Mount Cable Clamps Set of 8from RigWheels Cloud Mount Cable Clamps Set of 8can be used to double the capacity of the Cloud Mount Vibration Isolator.

Each clamp can be used to adjust the length of its cable loop, providing fine-tuned resistance for the isolator. Mounting screws are included for each clamp.

Use with Cloud Mount Wire Ropes Used for Increasing Capacity of Rig Includes Mounting Screws

Parameters
Dimensions and Weight	Not specified by manufacturer
Packaging Info
Package Weight	1.5 lb
Box Dimensions (LxWxH)	8.8 x 5.85 x 1.24"

Related Questions and Answers

Q: 1. It supports and isolate a Sony FR7 as shown on the photo?

A: Yes, the RigWheels PTZ Camera Wall Mount Vibration Isolator/Damper with Pipe Clamps can accommodate and isolate the Sony FR7 Cinema Line PTZ Camera.

Q: 2. Will these work with Proaim Victor cart?

A: There is a good chance of compatibility using the Inovativ C-Stand Storage Clamps (Set of 2) with the Proaim Accessory Cross Bar for Proaim Victor & Atlas Camera Production Carts on the Proaim Victor V1.1 Video Production Camera Cart (42"). Proaim replicates Inovativ designs.

Q: 3. Can I start with this model and just buy additional parts to make it into a RigWheels RD02 RailDolly-2x? If so, what additional parts would I need to purchase later on?

A: Yes, the bottom carriage can be added later.

Q: 4. Will these fit an Impact Turtle Base C-stand?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726 can work with a Impact C-Stand.

Q: 5. How many pounds can this support?

A: For the RigWheels RigPlate Camera Suction Mount with A-Cups, your maximum payload is about 15lbs.

Q: 6. What is the max weight capacity on this?

A: I would say 100lbs is a nice safe limit. However, the manufacturer has tested 200 lbs without issue. At that kind of weight, do be cognizant of the support rail strength and mounting.

Q: 7. How far apart do the rails need to be... or what is the distance from the outer edges of the bottom/side wheels?

A: Please see the brackets and the specs they have. RigWheels Universal Rail Brackets with 13 Cross Bars B&H # RIEB13

Q: 8. what are screws to attach to crossbar? on last 2 pictures they look like the tightening knobs but product pic looks different

A: The mounting hardware is included but they do not list its specs for the Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726.

Q: 9. Will these fit Kupo C-Stands?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726 will work with Kupo C stands.

Q: 10. Is there anything similar to this for 1.25" speed rail?

A: The most similar alterative to the Kessler Crane Leg Clamps for Kwik Rail System (Set of 4) for 1.25" speed rail would be the CineMilled 2" Billet Trailer Hitch Adapter for 1.25" Speed Rail Tubing (BH #CICM3100).

Adrian	23/09/2024
[1.5 lb] What's to say? It works. And it works really well. Threw up a blackmagic design pocket with some ananmorphics in a Jetta in less time than it takes to say anamorphic. Just, word to the wise, don't test how strong the magnets are by magnetizing them to each other; trust me, they are strong.... 5

Hirochika	21/09/2024
[1.5 lb] It is amazing. Magnetic power is so strong. No more complicated setting over mounting camera and thing for shooting. 5

Hirochika	19/09/2024
[1.5 lb] I have never seen anything like it with so much power of magnet. 5

Kevin	21/08/2024
[1.5 lb] This is the best method for mounting small cameras 5

Friedrich	05/08/2024
[1.5 lb] WOW. These are stupid strong. Have two of them to fix a camera to a metal wall and need to use both arms to pry it off. 5

Russell	24/07/2024
[1.5 lb] I have metal working machines and have been able to build my own versions of most of the Rig Wheels Platforms. Granted my stuff in not interchangeable into multiple configurations. That was not necessary, I just build platforms as needed. The one thing I could not easily duplicate is this magnet. It has a 1/4 x 20 stud, making it easy to screw into any threaded hole I make. I would not run any attachment system without safety tie downs. This is where using a magnet is far superior to a suction cup. Should it come loose, it will reattach itself without any assistance. Not that one ever has, but it is comforting to understand. An array of 8 of these requires some effort to release from the vehicle. I am impressed. The long stem is essential. I added a nut and once I set the length needed use a nut to lock it in place. Realize, all car surfaces are not flat, in fact it is hard to find flat. By adjusting the depth of the stem, you can compensate for a small amount of curvature on a car hood. A bonus feature, the surface you are attaching to does not have to be perfectly clean to get attachment. Although I do clean the area I am mounting to. I can see where a bit of grime between the magnet and the car paint might get ground into the paint. 5

Marcus	07/06/2024
[1.5 lb] Awesome for rigging on cars (except for hoods made of carbon fiber) or just rigging anything in general! Just make sure they NEVER come into contact on the magnet side unless you have something durable between them. 5